Mesin pengikat tepi

HOLZ-HER 1417

Kondisi: bekas, Tahun pembuatan: 2001, tinggi total: 1.750 mm, panjang total: 5.650 mm, lebar total: 1.100 mm, machine-ad-001 Duedpfxoxlqpdo Ahuer

Kondisi: baru, Tahun pembuatan: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically adjustable height and tilt (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length: 3,000 mm - Manual parallel fence adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) with 4,000 rpm - AKE tool clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed adjustment from 2,000–6,000 rpm - Precise speed adaptation to the material increases both cutting quality and saw blade life Extended cutting height for single-sided tilt This option is designed for single-sided tilt with a large extraction hood for a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and cutting height is 179 mm. Available only with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit, single-sided tilt - With electric height and lateral adjustment, scoring blade height programmable with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting possible only on machines prepared for a scoring unit. Dujdpfew I Uxcsx Ahuer LED lighting - Particularly energy-efficient LED technology clearly marks the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precision running. It is infinitely lockable in any position. The large double rollers, precisely manufactured from hardened steel, keep the upper carriage absolutely aligned with the lower carriage via the hard-chromed guide bars. This running quality is maintained even after decades of use and contamination. The carriage design is an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, precisely fitted into the upper carriage, serves as a mount for the cross slide and as a connection point for various accessories. The entire unit is low-maintenance and requires no lubrication. On/off switch on the double roller carriage - The on/off switch on the double roller carriage is always within easy reach. The four buttons control the main saw blade and the scorer. This saves steps and increases safety. Mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation enables precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and shown on a measuring scale. The play-free and robust flip stops can be easily moved and set as single stops over the complete range up to max. 3,500 mm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kanter HOLHER SPRINT 1417 ini memiliki operasi berikut: -praj-gilingan (pre-milling) -pemotongan -pemotongan secara presisi -mata router radius Duedpfxeyg Er Ro Ahujr -cyclone radius -radial copy shaping -pembersih cyclonic lurus -pemoles

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 558/0-112, Fungsionalitas: berfungsi sepenuhnya, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feed 1901 Tracing nozzle Pressure unit 1913 MOT End trimming unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for contour milling Scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1944 Length approx. 5900 mm Djdsh Uyg Espfx Ahusur Connected load 21.4 A

Kondisi: bekas, nomor mesin/kendaraan: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Number of working units: 9 Duodpfx Ahswuz E Roujr

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Dusdpfsv Sv Ensx Ahuer Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Tahun pembuatan: 2019, Kondisi: bekas, General Information The MobyLift is a handy tool designed to ergonomically lift, transport, and position products such as doors, table tops, panels, and other slabs. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, helps reduce product damage, increases productivity, prevents back injuries, and thereby minimizes downtime due to illness. The MobyLift was developed in collaboration with reputable installation companies, combining their expertise and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Integrated automatic vacuum unit - Wireless, electric remote control The MobyLift MC-120-H is designed to be quickly and easily disassembled into several portable modules after switching off. This makes loading and unloading the MobyLift, or transporting it to another floor or building, very convenient. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator for continuous monitoring of battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to rear: 37°, electrically operated Djdjv Dauwepfx Ahujur - Head joint swivel angle: 90° to either side - Head joint rotation: 360°, continuous - Lateral shift: 7 cm - Weight: 150 kg, modular design for easy disassembly Location: Nattheim

Kondisi: bekas, nomor mesin/kendaraan: 007687, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multifunction unit: yes Max. feed speed: 18 m/min Djdpfxewuz Nps Ahusur Maximum panel thickness: 60 mm Working units: 7 pcs

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Weight approx. 1,140 kg Connected load 380V 7.5 kW Scoring unit 0.75 kW, manually adjustable, can be raised and lowered via pneumatic connection Edging length 2,800 mm Speeds 600/5,000/4,000/3,000 rpm via V-belt Electric tilting with digital indicator Electric height adjustment with digital indicator Cutting width 1,000 mm Rear support table 950 x 400 mm Duedpeq Au Huefx Ahujr Miter fence 2,500 mm with extension to 2,840 mm and 2 stops Extraction connection 120 mm + 80 mm for PSV Parallel guard system with narrow and wide hood Edging fence Air requirement for the scorer: 6 bar connection

Kondisi: bekas, nomor mesin/kendaraan: 008367, typ_der_angebracht_kante_2024-06-22_001 Duodpfx Ahjx Swfhjuor