Mesin pelapis tepi

HOLZ-HER Sprint 1329 multi

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Dijual: Holz-Her 1329 Multi Edgebander Premium + Return-Master 5920 Kami menawarkan mesin edging Holz-Her 1329 Multi kelas atas, lengkap dengan sistem pengembalian Return-Master 5920. Unit ini berusia 4 tahun dan dalam kondisi sangat baik. Harga Baru Asli: €138.000 + PPN Harga Kami: €69.000 + PPN (hemat 50%) Mengapa memilih mesin ini? Dapatkan mesin premium bekas ringan dengan harga yang setara mesin subsidi, namun tanpa birokrasi, dokumen, atau kewajiban jangka panjang dari aplikasi hibah. Perawatan: Diservis secara berkala oleh tim teknisi ahli Dimpex. Dcsdpfx Absygrghohoc Performa: Versi "Multi" dengan spesifikasi tinggi untuk kebutuhan produksi yang fleksibel. Hanya untuk pembeli serius.

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Dceded Rzc Rspfx Abhoc Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! Dodpfou Uvalsx Abhjcc -----

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, ketinggian potong (maks.): 250 mm, tinggi kerja: 850 mm, daya: 7,5 kW (10,20 hp), We are offering 1 x JRIMAC Underslung Crosscut Saw UKS 1.000 for sale. Dcsdpfx Aerfudrebhjc Crosscut capacities: 60x940mm, 140x820mm, 180x720mm, 220x520mm, 240x340mm Maximum cutting height: 260mm Saw blade diameter: 700mm Working height: 850mm Extraction ports (above and below): 160mm - Infinitely variable, pneumatic feed rate - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - 2-hand control with protective shield for cutting activation - Roller conveyors and stop systems available on request

Kondisi: baru, Tahun pembuatan: 2025, New machine Year of manufacture: 2025 Features and Technical Specifications: Dcsdpfxjxavrge Abhec Technical Data Main saw blade diameter (mm): 550 Format cuts with extendable fence and sliding table 3200 mm: 3200x3200 Saw blade tilting range (degrees): 46 Maximum cutting height at 90° (mm): 200 Maximum cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameters: - On frame: 120 mm - On saw blade guard: 100 mm Main motor power [S6 -40%] 50 Hz kW: 7 Scorer motor power [S6 -40%] 50 Hz kW: 0.9 Cutting width at rip fence (mm): 1000 Standard Equipment and Accessories: - Optimizer/Cut sequence control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android operating systems. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machine fleet as well as material and panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), import cutting lists * Optimize cutting lists by selecting one or more suggestions from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to simple and intuitive graphics from the 3D sequencer, guiding the operator through every step * Print barcode labels for identifying different parts, via Bluetooth connection to compatible label printers - 10-year warranty on saw carriage guide system - Maximum saw blade diameter: * Up to 450 mm with mounted scoring blade * Up to 550 mm without scoring blade - eye-S 15" electronic control, complete with: * 15" touchscreen display * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for executing complex cuts * Storage for up to 1,000 programs with corresponding images * Storage for up to 1,000 different tools with corresponding images * Sequential control of preloaded parametric machining programs * Environment for creation and storage of new sequenced operating programs * Automatic retrieval of working dimensions from the Thundercut app * USB port * Network connection readiness - Auxiliary functions of electronic control, including: * Calculation of the correct stop position on the longitudinal fence for format processing with tilted saw blade * Calculation of the correct stop position on the longitudinal fence for angle cuts with miter fence on the worktable, with or without tilted saw blade - Swiveling control panel above the table

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1996, Linde forklift truck H 60 D diesel Dedpfx Abjunztljhecc

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, SCM Olimpic K 560 Automatická olepovačka hran, rok výroby 2018 na prodej! Výbava: - Rychlost řetězového posuvu: 12/18 m/min Dodpfx Aow Sw Tksbhscc - Tloušťka hrany: 0,4/3 mm - Lepidlo: EVA - Frézovací jednotka na desky „RT-V“ - Jednotka nanášení lepidla „VC-S4.1“ - Ořezávací jednotka hrany „K-SEL“ - Frézovací jednotka hrany „R-K“ - Zaoblovací jednotka hran „ROUND X“ - Oškrabovací jednotka hran RAS-K - Leštící jednotka SP-V Technické parametry: - Rychlost posuvu (dvě rychlosti) m/min: 12 – 18 - Min. / max. tloušťka dílu: 8 – 60 mm - Tloušťka lepené dřevěné hrany: 0,4 – 6 (8 mm u HP složení) - Tloušťka lepené hrany z role: 0,4 – 3 mm - Maximální plocha lepené hrany z role: 135 mm² - Průměr cívky pro podporu „desky“: 780 mm - Maximální přesah lepené hrany vzhledem k dílu: 2+2 mm - Minimální vzdálenost mezi přepravovanými díly: 600 mm - Minimální délka dílu (při min. šířce dílu 100 mm): 140 mm - Minimální délka hrany z role: 180 mm - Minimální délka dřevěné hrany: 220 mm - Minimální šířka dílu (při min. délce dílu 210 mm): 95 mm (60 mm volitelně) - Šířka podpěry rozšíření: 560 mm - Výška pracovního stolu od podlahy: 900 mm Frézovací jednotka desky „RT-V“: - Max. plocha úběru třísek: 55 mm² - Max. tloušťka obrábění: 3 mm - Min./max. tloušťka dílu: 8 – 45 mm (60 mm volitelně) - Výkon motoru: 2 x 1,5 kW - Průměr frézy: 100 mm - Výška frézy: 49 mm (64 mm volitelně) - Otáčky nástroje: 9 000 ot./min

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL Dsdpfxjlat Hds Abhecc - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Machine in very good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, HOLZ-HER SPRINT 1329 okleiniarka Główne zalety i cechy: ● Konstrukcja: Solidna budowa, stabilna forma oraz doskonałe tłumienie drgań. ● Panel sterowania: Intuicyjny pulpit z monitorem dotykowym 15 cali, umożliwiający łatwe wprowadzanie, zapisywanie i wyświetlanie danych obróbczych oraz sterowanie maszyną. ● Automatyzacja: Automatyczny zapis informacji o używanych programach, liczbie obrabianych sztuk oraz czasie pracy maszyny. ● Cicha praca i bezpieczeństwo: Osłony dźwiękochłonne redukują hałas oraz zwiększają bezpieczeństwo stanowiska pracy. ● Programowanie: Programowane sterowanie HOLZ-HER zapewnia pełną funkcjonalność okleiniarki przy możliwości uruchamiania kompletnych programów obróbczych. ● Regulacja mechaniczna: Zmotoryzowana regulacja wysokości obrabianych elementów. ● Transport: Rolki podające na wejściu i wyjściu maszyny. Łańcuch transportowy maszyny ze zautomatyzowanym smarowaniem. Szczegółowa specyfikacja i wyposażenie (zespoły robocze): 1. Zespół frezujący wstępny 1802 (2 x 2 kW, 12000 obr/min): ○ Jednostka synchroniczna i przeciwbieżna z dwoma diamentowymi frezami K/F 70-64 30. ○ Zmotoryzowana regulacja grubości frezowania (maks. 3 mm). 2. Zespół podawania obrzeża 1901 Synchro: ○ Pozwala na precyzyjną regulację naddatku obrzeża, co znacznie wpływa na oszczędność materiału. Dcjdpown Nuasfx Abhjc ○ Podawanie obrzeża z jednej płyty o średnicy 820 mm. Szerokość załadunku obrzeży w postaci taśmy: 40 mm. 3. System klejenia Glue Jet 2.3 (opatentowany system): ○ Brak wałka klejowego – klej nanoszony jest za pomocą dyszy. ○ Przeznaczony do stosowania klejów EVA (granulat, wkłady) oraz PUR. ○ Pełna regulacja rozpoczęcia i zakończenia nanoszenia kleju, a także wysokości nanoszenia w zależności od grubości obrabianego elementu. ○ Technologia hybrydowa, czas nagrzewania 3-4 minuty. 4. Strefa docisku 1913 MOT (zmotoryzowana regulacja): ○ Trzy rolki dociskowe, z czego pierwsza napędzana i wykonana w technologii SYNCHRO. ○ Pozostałe dwie rolki ustawione skośnie dla lepszego docisku obrzeża. 5. Zespół obcinający 1928 (2 x 0,45 kW, 12000 obr/min): ○ Pneumatyczna regulacja. ○ Precyzyjne obcinanie obrzeży o grubości do 60 mm tarczami HM. ○ Zakres regulacji obu jednostek 0-10°. Dwie tarcze tnące Ø110. 6. Zespół frezujący uniwersalny 1826 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Przeznaczony do profilowania obrzeży w zakresie 15° do 90° lub prosto. ○ Narzędzia diamentowe z technologią AIR STREAM. ○ Promień narzędzia R=2 mm. 7. Zespół zaokrąglający rogi 1833 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Zaokrąglanie kątów w locie narzędziami HM do maks. R=3 mm. ○ Możliwość powtarzania promieniowania na obrzeżach. ○ Diamentowe narzędzia. ○ Promień narzędzia R=2 mm. ○ Grubość elementów obrabianych 10-60 mm. 8. Zespół cyklinujący 1929 MOT4 (cyklina profilowa): ○ Zmotoryzowana regulacja. ○ Do cyklinowania PVC oraz ABS. ○ Maksymalny promień do R=3 mm. ○ Dwie wymienne noże, dysze wydmuchowe oraz odciąg wiórów. 9. Zespół polerujący 1964 (2 x 0,12 kW, 1400 obr/min): ○ Dwie jednostki czyszczące z obrotowymi tarczami filcowymi. ○ Obie jednostki regulowane w zakresie 0-5° dla podniesienia efektu czyszczenia. 10. Netsystem 1856: ○ Zespół 4 dysz natryskowych (dwie z przodu i dwie z tyłu maszyny). ○ Płyn o właściwościach antyadhezyjnych i czyszczących. ○ Zapewnia niewidoczne łączenie i wysokojakościowe wykończenie.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system Dcsdpfx Ael Rix Ejbhec • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish