Mesin pengikat tepi

HOMAG UF11 / UF12

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) Dkedpfx Aoqt Dmyeaqel - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Max. working width: 1000 mm, feed rate: 5-20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Dkjdpji E Trpofx Aaqel

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Perkenalan singkat: Dodpsdx Axfsfx Aaqjkl • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Press type JJZ-CP designed for the production of plywood, doors, and MDF boards. The feeding and removal of laminated elements from the press is performed automatically using driven rollers. The press can operate in conjunction with glue dispensers. Technical data: - Maximum pressure: 500T (adjustable) - Maximum material height: 1300 mm - Maximum material size: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Installation depth: approx. 500 mm below floor level - Infeed table: 2000 x 1960 mm Dedpstutwvofx Aaqokl - Outfeed table: 2350 x 2500 mm - Maximum power: 13.2 kW - CE mark

Kondisi: bekas, Tahun pembuatan: 2004, Control via PLC Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed up to 12–18 m/min Working height adjustable via PLC Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller support plate Gluing unit for EVA adhesive with premelter Edge pressing unit Trimming unit Flush trimming unit with opposing motors Tiltable cornice unit Rounding unit with 4 motors Edge scraper unit Dedpfeu Tyx Ajx Aaqekl Glue scraper unit Oscillating brush unit

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 9 kW (12,24 hp), ketinggian potong (maks.): 82 mm, diameter mata gergaji: 315 mm, kecepatan rotasi (maks.): 4.400 rpm, panjang total: 3.300 mm, lebar total: 3.350 mm, berat keseluruhan: 3.000 kg, panjang pemotongan (maks.): 3.300 mm, kecepatan pemakanan sumbu X: 100 m/menit, laju pemakanan sumbu Z: 150 m/menit, kecepatan mata gergaji: 4.400 rpm, penggerak gergaji: 9.000 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Dkodpfx Aewrpcxeaqel Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | High-Performance Panel Saw System for Maximum Precision & Efficiency The SCHEER PA 4500 is a robust, industry-proven panel dividing saw designed for precise machining of coated and uncoated wood-based panels. Engineered for demanding applications, its standard configuration already meets all requirements for modern cutting operations. Main Technical Data: - Cutting length (max.): 3300 mm - Cutting height (infinitely variable): up to 82 mm - Main saw blade: Ø 315 mm | 60 teeth | Cut width 3.2 mm - Scoring saw blade: Ø 200 mm | conical | Cut width 3.2–4.0 mm - Main saw motor: 9.0 kW - Scoring unit motor: 1.1 kW - Saw carriage drive: 2.32 kW - Main saw blade speed: approx. 4400 rpm - Saw carriage feed: 0–100 m/min (variable adjustment) - Saw carriage return: 150 m/min (lowered) - Electrical connection: 400V / 50Hz / 3Ph - Pneumatics: 6 bar, 15 NL/cycle - Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s - Working height: approx. 930 mm - Angle stop: left Machine Concept & Highlights: - Heavy-duty cast honeycomb frame for vibration damping - Absolute value encoder for highest positioning accuracy (no referencing required) - Distance- and time-optimized saw carriage movement - Automatic oil mist lubrication & guideway blow-off - Program-controlled saw blade adjustment (height & scoring side) - ProLock quick-change system for the saw blade - "Dust-tested" – emissions only 0.65 mg/m³ Machine Equipment: - 1x Angle pressure device WP 8500-1400 Adjustment range: 0–2200 mm Pressure force: approx. 480 N Cycle-controlled retraction function for panel handling - 1x Feed table HP 5130 – 33 x 33 Rear-mounted with hardened guides & racks Roller conveyor system for smooth panel transport - 6 clamp fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy - 1x Angle stop table HP 5137-1-1465 - 1x Workpiece support table HP 5135-1-1465 Each with Pertinax coating, 1465 x 800 mm - 1x Air cushion system LK 5169 Central radial fan, max. pressure 2800 N/m² - 1x Control cabinet Dust-tight, separately mounted, vibration-protected - 19" TFT flat panel monitor, keyboard, trackball Control & Software: - SIMATIC WinLC RTX soft PLC with S7 functionality - PA-WIN10 user interface on Windows 10 Professional (64 bit) (upgrade to latest Windows version possible at any time) - True-to-scale real-time simulation and graphical cut pattern editor - Integrated interfaces (label printing, panel storage management, etc.) - Network-compatible, future-proof, and modularly expandable Operating Modes & Operation: - Manual mode: single cut, chain dimension, trimming, remnant cutting - Automatic mode: processing of cut plans, online order processing - Editor: batch list-based planning & optimization - Maintenance & diagnostics: saw blade measurement, single component control, etc. 📞 Contact us for a personalized quote or to arrange a viewing. Delivery, installation, commissioning, and training are optionally available.

Kondisi: sangat baik (bekas), COMPLETE FOUR-SIDED PANEL PROCESSING AND EDGE-BANDING LINE, max. working width: 3,000 mm, equipped with automatic feeding and stacking system, comprising the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Panel turning device (90° LONGITUDINAL–CROSSWISE) "RBO" Model GPK 1 X03001D) 2nd double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 2 - 11 X03001E) Panel turning device (90° CROSSWISE–LONGITUDINAL) "RBO" Model GPK 2 Dkodpfx Asi Rbg Teaqjl X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200

Tahun pembuatan: 2020, Kondisi: baik (bekas), de_001 Djdpfx Aajygtnyoqskl

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 1000025340, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.735 mm, jarak lintasan sumbu Y: 1.650 mm, jarak gerak sumbu Z: 245.290 mm, tinggi benda kerja (maks.): 60 mm, produsen pengendali: Biesse BH 660, bSolid, bEdge, pergerakan cepat sumbu Z: 30 m/menit, gerak cepat sumbu X: 85 m/menit, pergeseran cepat sumbu Y: 85 m/menit, Trumpa aprašymas • X ašies darbinė zona: 6735 mm • Y ašies darbinė zona: 1650 mm • Darbo stalas: Pod and Rail tipo • Pagrindinio elektroverpalo galia: 13,2 kW • Valdomų ašių kiekis: 4 ašys • Maksimalus briaunos aukštis: 60 mm • Gręžimo verpstės iš viso: 20 vnt. • Įrankių keitimo vietų skaičius: 16 Išsamus aprašymas • Poklasė: CNC apdirbimo centrai frezavimui, gręžimui ir briaunų laminavimui. • Darbo pobūdis: Briaunų laminavimas, gręžimas, frezavimas • Maksimalus ruošinio aukštis: 60 mm • Darbo laukų skaičius: 2 Dkodpfoycvcxex Aaqjl • Darbo stalas: Pod and Rail tipo • Bėgelių skaičius: 10 • Pod pozicijos indikatoriai • Vakuuminės taurelės ruošiniui fiksuoti • Vakuuminių taurelių skaičius: 40 vnt. • Spaustuvai ruošiniui fiksuoti • Vakuumo siurblys • Siurblių kiekis: 1 • Vieno siurblio našumas: 250 m³/val. • Gręžimo agregatų kiekis: 1 • Agregato vieta: Viršuje • Vertikalių gręžimo verpsčių: 20 • Horizontalių gręžimo verpsčių X: 4 • Horizontalių gręžimo verpsčių Y: 4 • Frezavimo verpsčių: 1 • Agregato vieta: Viršuje • Valdomų ašių kiekis: 4 • Automatinis įrankių keitimas • Variklio galia: 13,2 kW • Briaunų laminavimo agregatai: 1 • Klijavimo agregatas • Pozicija: Montuojamas ant pagrindinio staklių tilto • Klijų indas karštam tirpstančiam klijui • Briaunų rulono talpykla • Pozicijų skaičius: 4 • Įpjovimo agregatas • 2 agregatai: viršuje • Įpjovimo agregatas: Fiksuotas X,Y kryptims • Įrankių sandėlis: 1 • Pozicijų skaičius: 16 • Įrankių sandėlis montuojamas ant apdirbimo galvos • Dvigubos funkcijos galva briaunų ir klijų nubraukimui • Oro srauto mazgas briaunų nuvalymui • Valdymo sistema: PC Control • Programinė įranga: Bsolid • Darbo mazgų apsaugos konstrukcija su saugos davikliais • Atliekų drožlių transporterio mechanizmas

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lini pemrosesan tepi satu sisi HOMAG dengan kecepatan pengumpanan hingga 32m/menit, pengaturan benda kerja yang presisi dengan rantai blok bergulir (sebagai pengganti rantai standar), mekanisasi yang diperluas, pengumpanan benda kerja otomatis penuh WZ14, dengan unit pengamplasan sabuk untuk tepi kayu solid. Terdiri dari: Mesin pemotong dan pelapis tepi HOMAG, Tipe: PROFI KFL350/13/A3/WZ Dedpfxswvlhle Aaqokl Stasiun masuk/meja pemasukan HOMAG POWER TBL100/30/30/S Unit pengembalian/BOOMERANG LIGMATECH, Tipe: ZHR 30/L/185/F