Bale press

HSM 820 plus

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine exhibits a malfunction due to moisture and should be inspected. Lhsdpfxeip D Rpe Aa Rsp

Tahun pembuatan: 2008, jam operasional: 40.000 h, Kondisi: baik (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75 kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2008 Enkel Hardox bodemplaat Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieomvormer Anti-ratten bekabeling Dieptefiltratie van olie Ledpfx Aekcgf Hoa Rshp Modem Bedrijfsuren: 40.000 Deze balenpers kan ook volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij krijgt u 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene beginselen van revisie Reiniging & demontage Voor de daadwerkelijke revisie wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Maatvoering Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Ram, • Frame, • Kanaal, • Voorpersklep Na demontage en inspectie wordt de persram weer opgelast en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig hersteld en uitgedeukt. Overschilderen Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw gepakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vernieuwd. Alle lasdozen worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinrichtingen en knopers worden vervangen. Cilinders: De cilinders worden opnieuw gepakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe zuigerstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340 variant met up-to-date software.

Tahun pembuatan: 2012, Kondisi: baik (bekas), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Feed opening: 1,320 x 680 mm Included: - Frame Lhsdpfx Aeilh Efea Rop - Pre-screen - Electric motors for crusher and pre-screen. Spare jaws in stock!

Kondisi: siap digunakan (bekas), Model Baler HSM V-press 1160 plus Tekanan (kN): 532 Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Ledora Nyuepfx Aa Rshp Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Tahun 2007-2008 harga 5500 eur Tahun 2009-2010 harga 5800 eur Tahun 2011-2013 harga 6300 eur Kami juga memiliki Baler HSM v press 1160 max tahun 2014-2015 Berat (kg): 2300 TAHUN 2017-2018 JUGA TERSEDIA – 7500 eur

Kondisi: belum diuji (bekas), Hydraulic press for compacting paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (can be reduced to 2300 mm). Weight approx. 3500 – 4000 kg. Ledpfx Aaoh Nyfyj Rohp For further information, please contact: +48 539 660 495.

Kondisi: siap digunakan (bekas), Cone Crusher Svedala Lhsdpfx Aaopn I H Te Rsp Merek: Svedala Tipe: 36/H/MC Termasuk: sasis dasar dan unit oli

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Lodjvwlqqspfx Aa Rshp Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, | Model | Lokomo C-140B Jaw Crusher | Lhodpexcg Spofx Aa Rep | Bukaan Pengumpan (Lebar × Tinggi) | sekitar 1400 mm × 1000 mm | | Ukuran Maksimal Pengumpanan | sekitar 600–800 mm | | Nilai Kekuatan Material yang Dihancurkan (mis: batuan) | ~200 MPa (sangat tergantung pada material) | | Kapasitas (Throughput) | estimasi 400 t/h | | Daya Motor | 200 kW | | Rentang Berat | 55 ton |

Tahun pembuatan: 2001, Kondisi: baik (bekas), HSM-500.1_VL PRESS PAPER BALER FILM BALER BALE PRESS Immediately ready for use, good CONDITION Used & in good shape / see photos Lodpfx Aajlc Du Ne Rehp Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Pressing force: 50 tons V 400; Hz 50 KW 7.5 Amp. 15.5 Pressing power: 6 tons Year of manufacture: 2001 More presses available in our other listings Item is used and in good condition / roughly cleaned (Just plug it in and start working) Dimensions: Available on request! Additional photos show possible applications. All items visible in the photos are also available from us. Price stated is net per unit for collection from warehouse, 47441 Moers Current stock: 1 unit Inspection is expressly offered. More equipment available in stock see photos or contact us by phone General information: We offer here items from various acquisitions, which we describe as accurately as possible and provide meaningful photos. We cannot provide further details on the item. We offer the possibility of viewing on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone arrangement. The item can be collected immediately if needed. We can only respond to inquiries about this item if you provide a telephone number in your request due to time constraints. Unless explicitly described otherwise, this offer concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically ok as far as we can determine. All offers ex-warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and transport costs. Feel free to call if interested. All dimensions are approximate. Errors in the description expressly reserved.

Kondisi: siap digunakan (bekas), Baler HSM V-Press 860 year 2005–2009 price 5,600 EUR Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening (W x H): 1195 x 650 mm Bale size (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Strapping material: wire Material to be pressed: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, styrofoam HSM V-Press 860 plus baler year 2013–2015 price 7,500 EUR HSM V-Press 860 L baler year 2015 price 9,000 EUR HSM V-Press 860 plus baler year 2019 price 9,000 EUR HSM V-Press 860 demo baler year 2020 price 13,000 EUR 4-fold bale strapping with wire Bale dimensions (L x W x H mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data: Dimensions (L x W x H mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler year 2020 price 14,000 EUR Pressing force: 594 kN Voltage/frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Lhodjra Rbgspfx Aa Rep Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Strapping material: wire Material to be pressed: film, cardboard Idle cycle time: 25 s