Double scissor lift table trolley 400 kg

HYMO CXX4-8

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Chedpfx Ajuz If Njnped Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: baru, Tahun pembuatan: 2026, Furnace output: 350 kW Working output: 279 kW Flue diameter: 200 mm Warm air duct(s): 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery rate: 17,800 m³/h Power consumption of warm air fan: 3 kW Power consumption of flue gas fan: 600 W Designed for room volume: 5,000 m³ Heatable area: 1,000 m² Oven height without warm air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Chedpfx Anjyffylspod Weight: 850 kg

Kondisi: baik (bekas), Tahun pembuatan: 2001, Maschine ist in gutem Zustand. Die gezeigten Einzelteile werden nicht mitgeliefert. Schneidwerkzeuge sind nicht im Lieferumfang enthalten. Cjdpfx Aorpk Rmjnpjhd

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.200 kg, diameter spindel: 6.995 mm, jenis arus masuk: tiga fasa, diameter rol: 210 mm, kecepatan spindel (maks.): 20 rpm, kecepatan spindel (min.): 60 rpm, tinggi total: 1.900 mm, panjang total: 2.700 mm, lebar total: 1.600 mm, lebar rol: 175 mm, tahun perombakan terakhir: 2026, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Cjdpfovxa Dbjx Anpjhd Test run possible Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Kondisi: baru, Tahun pembuatan: 2024, de_001 Chjdpfxeu Nyxwo Anpod

Kondisi: bekas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform size: 2,100 x 1,400 mm Lift height (max): 930 mm Lowered installation height: 100 mm (with mounting frame) Raised installation height: 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Power connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop lowering when the safety bar is activated - Without hydraulic power unit - Without electric control unit Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition Cedpfxel Nbqcj Anpjhd

Kondisi: bekas, KA_GB 10.14.14/d Chodpfsdyvipox Anpsd

Kondisi: baru, en-GB: - New - Description: - For sawing, milling, surfacing, thickness planing and, optionally, slot mortising - The work tables are made of heavily ribbed cast iron and the base frame is constructed from welded steel, ensuring torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running anodised aluminium sliding table with ball contact system - Tilting saw blade from 90° to 45° - Table extension with degree scale and aluminium cross-cut fence for miter cuts on panels and large workpieces - Planer unit with TERSA quick-change system featuring three planer knives - Helically toothed steel feed roller for constant workpiece feed during thickness planing - Curved cutter guard for profile milling, standard with fine adjustment - Milling unit with two speeds - Independent drive motors for all units - Quality Made in Italy Technical Data: Dimensions and Weights Net weight approx. 245 kg Surfacing Surfacing table width 300 mm Surfacing table length 1200 mm Saw/surfacing fence tilt angle 90/45° Max. planing depth surfacing 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Note on required space: The dimensions take into account maximum travel paths or usable lengths. Thicknessing Thickness table length 450 mm Thickness table width 300 mm Min. working height thicknessing 3 mm Max. working height thicknessing 200 mm Max. planing depth thicknessing 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor duty cycle S6 Drive motor duty cycle 40% Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Milling Spindle Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speed(s) 5000 – 7500 rpm Chsdpfxsvwf Eno Anped Max. Milling Tool Diameter Max. tool diameter 160 mm Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Planer Cutter Block Planer block type TERSA Planer block diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with parallel fence 540 mm Max. cross-cut width left of saw blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multi-function fence for parallel cuts and surfacing - Table extension with cross-cut fence and fence jaw - Eccentric clamping arm Item no.: 5500030

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Feeds / rapid traverse for Z/X/Y axes Chjdpfx Ajt Hw Ayenpsd continuously variable: 100 – 10,000 / 15,000 mm/min Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.

Kondisi: baru, Table size: 800 x 800 mm Table load capacity: 1500 kg Swivel range: 0 - 105 degrees Rotational speed: 0.15 - 1 rpm Height adjustment: 672 - 1180 mm Hollow spindle diameter: mm Welding current: 500 Ampere Torque at faceplate: 3000 Nm Total power requirement: 0.75 kW Space required: approx. 1560 x 1120 x 750 mm Features - Made in EU - Self-locking gearbox prevents overrun and lag with eccentric loads Codpfjfv Azpsx Anpehd - Hydraulic height adjustment allows for almost unlimited positioning options - Electronic components from Schneider/Siemens/Delta - Frequencz-controlled stepless turntable speed - High stability due to heavy-duty, compact design - CE certificate - Excellent price-performance ratio - Standard version delivered with remote control and dual foot pedal - 3-year warranty (see warranty conditions) - Hydraulic height adjustment with locking system (for fall protection) Price on request