Unit penggilingan

IMA

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) Kedpfx Aevvkfdoahofa - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Ksdpfx Ajff R Tqeahofa Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: bekas, Tahun pembuatan: 2010, Touchscreen control for adjusting workgroups Panel thickness from 10 to 50 mm Solid wood 12 mm PVC/ABS from 0.4 to 3 mm Feed rate up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height via CNC Kfodpfx Aaopzfcgshoa Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive unit Pre-milling unit with two 1.5 kW motors each Roll holder plate COMBIMELT gluing unit for hot-melt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Fine milling unit with 2 motors Corner rounding unit Edge scraper unit Installed power 13.7 kW Machine length approx. 6170 mm TECHNICAL DETAILS TO BE VERIFIED

Kondisi: baru, Tahun pembuatan: 2024, New machine  Year of manufacture: 2024 RUWI Three-Spindle Underbench Router Professional equipment for the workshop This underbench router enables easy chamfering, rounding, profiling, grooving, sanding, as well as various other routing tasks to quickly achieve the desired results. Fast tool changes are possible thanks to accessible tool storage. Larger models feature reduced setup times. Time-consuming fine adjustments and trial routings become unnecessary when equipped with all essential tools. The spindle can be continuously adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical specifications: Kfjdpfx Aork Tqkoahja - High-quality workmanship - 3 tools ready for use - Electronic control prevents speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor - Soft start and inrush current limiter - Opposing return feed thread above the ball bearings reduces dust and dirt ingress - Quick tool change - Dust extraction above and below the table top - 1x fine adjustment - Incl. fence ruler - Incl. mounting set for table extension - Convenient tool change from above - Complies with BG and wood dust tests Technical data: - Table size: 640 x 500 mm - Table height: 910 mm - Infinitely variable speed control: 8,000 – 25,000 rpm - Tools ready for use: 3 - Routing stroke: 43 mm - Motor output: 1,050 watts for continuous industrial use - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optional 6 mm, 6.35 mm, and 10 mm - Extraction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short-term Location: Solingen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Single-sided laser and PU edge banding machine incl. workpiece return conveyor Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return conveyor type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting unit - Feed speed 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed speed: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units & Gluing: Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutters Automatic vertical adjustment for jointing cutters Lasertec activation unit Performance Basic gluing unit A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll table Infinitely adjustable edge presser Vacuum unit for single strip feeding Servo edge feeder Edge thickness measurement for roll material Quick-release system for application unit QA/PU Interchangeable PU65 application unit Automatic glue quantity dosing Balti melting unit Automatic adjustment of pressure zone Moistening device for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 chamfer/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment of end trimming stop Premilling unit BF20 Pneumatic adjustment for premilling unit Multirouting unit MF21 servo Release agent spraying unit top Kfodpjxgrfpsfx Aahsa Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment for FA11 Additional equipment: Edgebanding of solid wood edging Automatic adjustment of infeed fence left side Infeed extension 500 mm Sliding carriage Workpiece support, scissor design Scissor design extension Workpiece thickness 8mm instead of 12mm Potential-free contact Flexible edge sequence control software Gap setup Workpiece return conveyor ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters: Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed speed: 8 – 30 m/min

Kondisi: bekas, jarak tempuh: 352.760 km, daya: 180 kW (244,73 hp), pendaftaran pertama: 11/2006, jenis bahan bakar: diesel, berat muatan maksimum: 3.070 kg, berat keseluruhan: 6.500 kg,

Kondisi: bekas, Tahun pembuatan: 2006, IMA Novimat Edgebanding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of Manufacture: 2006 Machine No.: 08113 Rated Power: 41 kW Workpiece Feed: Sliding chain Fence Guide: Adjustable fence guide 700.080 Infeed Table: 63.152 Milling Unit: 08.378 Glue Level Monitoring: Present Glue Application Unit: 04.0832 Bonding Unit: 04.1570 PU Premelter: 283.203 High-Speed Tool Holder: For high-speed motors End Trimming Unit: 08.42 Milling Unit: 08.0555 Multi-Processing Unit: 08.348 Multi-Profile Scraper Device: 08.516 Flat Scraper: 08.517 Copy Corner Buffing: 08.604 Buffing Unit: 08.617-4 Safety Features: Light barriers, temperature controller, control terminal Additional Equipment: Pre-infeed roller conveyor table Total Machine Length: approx. 11 / 16 m Extraction System: Included Accessories: Edge Magazines: 2 push magazines for edging, each for 12 rolls, mobile Plasma Edge Preheating (PLASMATREAT Düstec): 2 plasma devices Control cabinet Panel Return System (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, various table lengths Round belt conveyor table Control cabinet system 2 angular transfer tables Peripheral Items for Edgebanding Line: Consisting of: Kfjdpfx Asrnkw Dsahoa Interface system Barcode scanning system

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Type of adhesive: PUR adhesive, gluing system: cartridge, maximum edge thickness: 25mm, maximum workpiece thickness: 60mm, feed rate: 16 m/min, minimum workpiece length: 140mm, minimum workpiece width: 60mm. Includes various spare parts and Ligmatec return conveyor. Documentation available. On-site inspection possible. Kjdpsugmw Ejfx Aahefa

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Kfedpfx Aaeltmnlohsa Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Kfjdpfxskt Uuas Aahoa Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"