Gergaji besi

KASTO EBS 450

Kondisi: bekas, Tahun pembuatan: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Maximum multiple feed length: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Hjdpfxsvxwkfs Al Isl Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control system; Frequency-controlled saw band drive; Minimum quantity lubrication; Chip conveyor; Powered infeed conveyor 6 m + 3x short roller conveyor 1 m; Outfeed conveyor 2 m; Machine can be inspected under power.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Kasto bandsaw system is available. Cutting capacity at 90°: round material: 530 mm, square material: 530 mm x 530 mm, flat material: 530 mm x 640 mm. Saw blade length: 7,675 mm, blade width: 54 mm, blade thickness: 1.6 mm, cutting speed: 120 m/min. Overall system dimensions (X/Y): approx. 18,000 mm / 4,000 mm. Weight: approx. 6,000 kg. Including roller conveyors. Documentation available. An on-site inspection is possible. Hsdov S E Edjpfx Al Isl

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hodpfx Alod N H A Nj Iel Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Condition: New machine Hjdoilg Hdepfx Al Ijl Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features: - Fully hydraulic, semi-automatic design: Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Hodpfx Aez N Amsl Iel Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 9207102, Offer 12001 Hodpfx Alji Hpmts Isl Technical Specifications: - Material thickness: 1.25 mm - Max. throat depth: 180 mm - Roll center distance: 63 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Working speed approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Required space (approx.): W 550 x H 1250 x D 1000 mm - Weight (approx.): 120 kg - Includes: Electronic foot switch

Kondisi: bekas, Tahun pembuatan: 1979, de-sn440-gewicht Hjdpof Dwa Usfx Al Iol

Kondisi: bekas, Tahun pembuatan: 1982, en-GB: Technical details: Drilling capacity in steel (diameter): 28 mm Hsdpfxju Idkbo Al Ijl Throat depth: 300 mm Drilling stroke: 150 mm Drilling capacity in cast iron: 30 mm Spindle taper: MT3 Spindle speeds: 200; 300; 500; 800; 1250; 2000 / 6 steps rpm Feed: manual mm/rev Max. distance spindle/table: 50 – 600 mm Table clamping surface: 330 x 300 mm Table rotatable: no ° Drill table adjustment: 550 (hand crank) mm Column diameter: Ø 125 mm Total power requirement: 1.5 kW Machine weight approx.: 300 kg Machine dimensions approx. LxWxH: 0.7 x 0.45 x 1.87 m Equipped with RÖHM Supra quick-action chuck 3 – 16 mm

Kondisi: bekas, Tahun pembuatan: 1988, Spitzenweite 1200 mm Hjdpfx Alsk Sat Ds Iol Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 195125, diameter pembubutan: 545 mm, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 410 mm, jarak lintasan sumbu Y: 140 mm, jarak gerak sumbu Z: 570 mm, berat keseluruhan: 5.040 kg, The MAZAK Integrex 100-IV is a compact and high-precision CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions as well as the integrated B and Y axes, this machine is particularly well-suited for demanding precision parts in medical technology, mechanical engineering, and fine mechanics. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control system. This enables both conversational and ISO programming and offers modern features for efficient and productive manufacturing. Overview of technical specifications: The travel ranges are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis features a swivel range of 225°, enabling complex 5-sided machining. The main spindle’s C-axis offers high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle achieves speeds up to 6,000 rpm with a power output of approx. 11 kW, allowing for dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with a power output of approx. 5.5 kW, making it ideal for milling, drilling, and tapping operations. The machine is equipped with a tool changer (present) for maximum tool length of 210 mm, as well as Capto C6 tool interface—ensuring high rigidity and fast tool changes. Features: Included equipment: • Chip conveyor • "Tool Eye" tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV stands out for its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. Hsdpfx Aleyir I Rs Iel You are in good hands with us—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.