Rak tugas berat

Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Tahun pembuatan: 2013, Kondisi: bekas, Cutting diameter: 420 mm Band saw blade length: 41 x 5600 mm Cut width: 1.3 mm Ljdpfx Aajd Izmas Ushg Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw drive motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw, equipped with round bar magazine and discharge gripper for cutting round bars from 50 to 420 mm. Includes 6 storage compartments, each with a maximum bar weight of 3,400 kg. Cutting lengths: 20 – 1,000 mm. As-new condition, approx. 1,000 operating hours.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Ledpfx Aeh Ek Daoa Uohg Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 2.444 h, kapasitas angkut: 1.000 kg, tinggi angkat: 2.700 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 1.850 mm, panjang garpu: 1.150 mm, jenis penggerak: Elektro, Hand pallet stacker tinggi Titik berat beban: 600 Tipe mast: Duplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: Baik Jenis ban depan: Poliuretan Jenis ban belakang: Poliuretan Tegangan baterai: 24V Tipe baterai: Lithium-ion Tahun pembuatan baterai: 2019 Deskripsi: Lhedpfx Aevtu A Uoa Usg Pengisi daya terintegrasi, platform pengemudi dapat dilipat

Kondisi: bekas, Tahun pembuatan: 2004, jenis bahan bakar: gas, Load capacity: 2,500 kg Lift height: 3,050 mm Fork length: 1,200 mm Load center: 500 mm Turning radius: 2,444 mm Lhjdpfx Aaer Dg H Es Ueg Travel speed: 22 km/h Front track width: 1,008 mm Rear track width: 932 mm Machine weight: approx. 3.64 t Space requirements: approx. 3.8 x 1.25 x 2.25 m

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Lhjdpjmhhypofx Aa Ueg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: Lhjdpjmhhf Ssfx Aa Usg - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Tahun pembuatan: 2011, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 10.000 Ltr, de-en Lodpfscl Sb Rjx Aa Ujhg

Kondisi: bekas, daya: 7 kW (9,52 hp), Tahun pembuatan: 2023, With the RS1500 recycling screen, we offer you a compact trommel screen that requires very little space yet can separate large quantities of screened material efficiently. The major advantage is that you can transport the trommel screen on public roads as a TÜV-approved trailer at up to 80 km/h, giving you maximum flexibility regarding your work location if you purchase this trommel screen. This is particularly beneficial in civil engineering, utility construction, and landscaping applications. Despite its capabilities, the small trommel screen weighs only 2.4 tons. With a total weight of 3.5 tons, it can be conveniently transported to your construction sites, just like the smaller trommel screen. The hydraulic tipping grid allows larger stones or clay lumps to be sorted out at the very beginning of the process. Additionally, with the appropriate mesh size, you can even screen fine chippings. As a result, it provides valuable support in processing topsoil and concrete recycling, allowing you to significantly reduce landfill costs when you invest in a trommel screen! Lhjdpfx Aaorrvyuj Usg REMAV GmbH is a technology leader in the manufacture of recycling and screening plants. At our Viernheim location, we specialize in producing equipment for processing valuable materials in the sand, gravel, and recycling sectors.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Lhodpemhhl Hjfx Aa Ujg Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: baik (bekas), czc5F9d7 Lhedpfxjcn Am Ie Aa Ujg