Mesin penggilingan tempat tidur

LAGUN BM 5

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg Ibsdpeh Nvyzsfx Afnjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Ibedpszb Evlsfx Afneb Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Bagian yang diperlihatkan dengan tangan tidak disertakan. Dengan mesin sudah termasuk dudukan alat SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 rpm. Heidenhain iTNC 530. Tempat penyimpanan alat 40 posisi, SK 40. Iodpfx Afjlpcdwensbb

Kondisi: bekas, Length: 1800 mm Width: 1200 mm Iedpocxxu Defx Afnobb Machine weight approx.: 1.6 t Required space approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Diameter putaran 376 mm, panjang putaran 760 mm, kapasitas batang 76 mm, sumbu Y -/+ 52,5 mm, sumbu C 0,001 derajat pada kedua spindel, turret 24 posisi, Ibedpszt Spnofx Afnjb motor 22 KW, spindel utama 4000 rpm, spindel sekunder 4500 rpm, seri Fanuc I, 3 rahang penjepit, konveyor serpihan, alat penyetel, unit pengumpan batang LNS.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Diameter roda - maks. 1200 mm Lebar roda 260 mm Modul - maks. 16 Modul - min. 0,5 Langkah (stroke) 270 mm Jarak spindle/meja 920 mm Ibodpewzmpzofx Afnsb Penahan roda pemotong - SK Kontrol Bosch MTX Diameter meja 900 mm Diameter benda kerja maks. untuk roda gigi dalam 1200 mm Jumlah langkah - tanpa tahapan 50-1000 langkah/menit Diameter spindle 125 mm Lubang meja 320 mm Jarak sumbu Min/Maks 0-820 Daya penggerak kepala pemukul 30 KW Kebutuhan daya total 72 KVA Berat mesin sekitar 24 t Kebutuhan ruang sekitar 6,5x2,9x4 m M8160132

Kondisi: baik (bekas), Tahun pembuatan: 2016, kecepatan spindel (maks.): 3.500 rpm, berat keseluruhan: 6.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Parameter utama: Kontrol: FANUC 0iD/31iA Chuck: SAMCHULLY 10" Lubang spindle: 86 mm Dengan pipa pelindung: 78 mm Kepala revolver: 12 posisi utama, 12 posisi sekunder, koneksi BMT65, Tailstock hidrolik terprogram: MT5 Daya spindle utama: 22 kW S1max=3500 rpm Daya alat putar: 5,5 kW S2max=5000 rpm Rentang gerak sumbu X: 260 mm Rentang gerak sumbu Z: 830 mm Rentang gerak sumbu Y: + -52 mm (104 mm) Sumbu C Panjang pembubutan maksimum: L=760 mm Diameter pembubutan terbesar: D=376 mm Kecepatan gerak cepat: 30 m/menit Isdpfx Afswtg Inenebb Pengukuran alat otomatis dengan lengan probe Berat: 6000 kg

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), The Coiltech Decoiler Straightener Feeder System is a compact feeding solution designed for press applications. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rollers: 7 x 115 mm, decoiler capacity: 6,000 kg, inner coil diameter (min-max): 470–520 mm. Connected load: 7.5 kW, supplied with documentation. Ibedsi El Ucopfx Afnob

Kondisi: bekas, Tahun pembuatan: 1987, b07ccce7cbedcde7 Ibsdpfx Afjyz Db Ujnjb

Kondisi: baru, Bördelwerkzeug für Amada/LVD/Trumpf Iedoi Hbcwopfx Afnjbb