Mesin perata empat sisi Leadermac Compact LMC 623C 2000

Leadermac Compact LMC 623C

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm Hnsdpjwvqklofx Agken • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, Jumlah spindel: 6 unit Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Motor pengumpan: 4 kW Kecepatan pengumpan: 6-24 m/menit Berat: 4770 kg Dimensi (Panjang/Lebar/Tinggi): 4722x1860x1776 mm Hnjdpfjvnv Ubjx Agken Mesin moulding empat sisi Kuper SWT XL-6 versi jendela dengan pengaturan aksial dan radial spindel secara elektronik. Bodi mesin berat, tidak mudah melintir dan minim getaran. Jumlah spindel: 6 Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Kecepatan spindel: dikontrol frekuensi, 4.000 - 8.000 rpm Kecepatan pengumpan: 6-24 m/menit Deskripsi lengkap tersedia pada file PDF terlampir! (Data teknis sesuai informasi produsen – tanpa jaminan!)

Kondisi: bekas, Tahun pembuatan: 2005, Used machine Year of manufacture: 2005 Equipment and technical specifications: - Base machine 555 - Working dimensions for edge processing: - X = 3514 mm - Y = 1544 mm - Maximum working dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 pneumatically clamped consoles - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shaped arrangement - Max. drilling diameter: 35 mm (depending on panel thickness) - Spindle travel: 70 mm - Rotation direction: alternating right/left - Speed: 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - Speed: 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions Hedsx Enpqspfx Agkonn - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (carousel type) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control Availability: short-term Location: 63934 Röllbach

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included. Hnjdpepqxnxofx Agkjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, de-hu-001 Hnodoyhfhnepfx Agksn

Kondisi: bekas, incl. various slotting and tenoning discs Hsdpfjvwffzjx Agksnn used, good condition Manufacturer: Festo Model: ZA 101 Machine No.: 2668/S Number of spindles: 3 + crosscut saw Clamping height: 1 x 140 mm + 2 x 30 mm Crosscut saw: 2.5 HP Stop ruler LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Required space approx. 1700 mm x 700 mm x 1400 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as is, as inspected Without warranty or guarantee

Kondisi: diremajakan ulang (bekas), 6-spindle moulder (planing and profiling machine), equipped with a 22 cm working table and a ribbed table for processing short pieces. Automatic left spindle: adjusts automatically based on the width of the workpiece. Motor configuration and power ratings: - Bottom spindle: 5.5 kW - Right spindle: 4 kW - Automatic left spindle: 5.5 kW Hnsdjvhbf Sopfx Agksn - Second right spindle: 5.5 kW - Top spindle: 5.5 kW - Second bottom spindle: 4 kW - Feed motor: 4 kW - Hydraulic unit for automatic left spindle: 0.55 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Hnjdpfjwgwmnjx Agken Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: bekas, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left Hodjrg Exrjpfx Agkenn 4th shaft: right 5th shaft: top 6th shaft: bottom 7th shaft: universal shaft

Kondisi: baik (bekas), Tahun pembuatan: 1978, WACO HM200 UNIVERSAL, Planer-Moulder with 10 Spindles Year of manufacture: 9/1979 S/N 31469.708 Moulder with hydraulic feed and powerful spindle drive. Feed speed: 0-50 m/min Counter-bearings on all horizontal spindles. 1st, 5th, 8th, and 10th spindles equipped with planer head. Infeed table: 200 cm Technical Specifications: Working range: 200 x 100 mm (width x height) Spindle Configuration: 1st spindle bottom: 7.5 kW (10 HP) 2nd spindle right: 7.5 kW (10 HP) 3rd spindle left: 11 kW (15 HP) 4th spindle top: 7.5 kW 5th spindle top: 7.5 kW 6th spindle right: 7.5 kW (10 HP) 7th spindle left: 11 kW (15 HP) 8th spindle top: 7.5 kW 9th spindle bottom: 7.5 kW 10th spindle bottom: 10 kW Lower spindles max. tool diameter: 160 mm, working length: 210 mm Side spindles (right/left) max. tool diameter: 200 mm, working length: 110 mm Upper spindles max. tool diameter: 225 mm, working length: 210 mm Spindle diameter: 45 mm Hnedpfxjiz Tzxj Agkon L x W x H = Weight: 10 t