Baler

BTS-MF650 Ballenpresse Waste Baler

Kondisi: siap digunakan (bekas), Model Baler HSM V-press 1160 plus Tekanan (kN): 532 Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Tahun 2007-2008 harga 5500 eur Tahun 2009-2010 harga 5800 eur Tahun 2011-2013 harga 6300 eur Kami juga memiliki Baler HSM v press 1160 max tahun 2014-2015 Iedpfxera Nyuj Ab Isa Berat (kg): 2300 TAHUN 2017-2018 JUGA TERSEDIA – 7500 eur

Kondisi: baru, Tahun pembuatan: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Iodsmftk Aopfx Ab Isa Units: 2 brush units centrally adjustable, each with individual fine adjustment Diagonal brushing technology: Yes, infinitely adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Kondisi: bekas, nomor mesin/kendaraan: 2907000, Envelope inserting machine Fracotyp-Postalia FPi4530 Serial No. 10EY5510 Online video inspection via Skype video We would be pleased to welcome you for a viewing – further machines available in stock Isdjmkninjpfx Ab Ija Immediately available – inspection possible In stock in Emskirchen / Nuremberg – machine can be tested on site.

Kondisi: bekas, Edge Banding Machine Sumbel Perkeo Ijdpfx Ajwgdw Tob Ija Year of manufacture: 2014 - Serial No. 40050 Maximum working width: 60 mm Cold glue application system -- In like new condition -- Online video inspection available via WhatsApp, MS Zoom, or Telegram. Located in Emskirchen/Nuremberg - Immediately available - Test run possible.

Kondisi: bekas, nomor mesin/kendaraan: 006724, Maximum working width: 1200 mm Maximum working length: 1200 mm Isdpfeu A Ev Ujx Ab Ija Maximum working height: 1600 mm

Kondisi: siap digunakan (bekas), HSM 155 VL Baler Bale dimensions Length x Width x Height: 1100 x 700 x 700 - 950 mm Bale weight: 200 – 250 kg (Cardboard) Technical data: Length x Width x Height: 1470 x 940 x 2259 / 2439 mm Machine weight: 950 kg Isdpfora Nrmex Ab Iea Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Pressing force: 16 tons Price for HSM 155.2 VL baler – 2,800 EUR

Kondisi: belum diuji (bekas), Hydraulic press for compacting paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (can be reduced to 2300 mm). Weight approx. 3500 – 4000 kg. For further information, please contact: +48 539 660 495. Isdpfxjh Nyfyj Ab Isa

Kondisi: baru, Tahun pembuatan: 2025, Sheet metal decoiler cantilever 500mm - Load capacity: 1,500 kg - Inner diameter: 480-530 mm - Mandrel with 4 expanding arms, ball-bearing mounted with disc brake - Maximum coil width: 500 mm Iodpfofvbxqjx Ab Ioa

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational Iodpfx Abjvwlqqe Isa - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg Isdjkfp D Tepfx Ab Isa For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.