Beli Ima Pelat Rantai bekas (13.294)

Tahun pembuatan: 2007, jam operasional: 138 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 900K707385, Tablet Press PRESSIMA – As New, in Delivery Condition Fully functional machine with complete documentation and software. Includes multi-tip tooling set EU-D (5 × 4mm) (original price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital display of parameters set via handwheels • Note: no automatic control system present Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feeder shoe: dual-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total consumption: 1.5 kW • Machine housing and compression area: stainless steel • Compression area paint-free, easy access, hard-nickel-plated surfaces • Central connection for dust extraction • Central manual lubrication of punches via hand pump • Automatic lubricant pump for punches and slide rails • Feeder shoe motor integrated in head section Mechanical Features • Handwheels for tablet thickness, main compression, pre-compression, and fill adjustment • Rotary flap between feed tube and feeder shoe • Solid pre- and main compression stations • Scrapers on upper and lower punches • Brake magnets on lower punches • Standard 12 mm fill cam • Lower punch retraction after dosing • Lower slide rail and lifting cam easily removable • Machine status indicator on operator panel Measurement and Evaluation System Cjdey Hl Aqspfx Ag Djrb • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main upper compression o Main lower compression o Pre-compression upper o Ejection force o Scraper force o Upper and lower punch displacement • Signal amplifiers for main compression, pre-compression, ejection, and scraper force included Equipment / Features • Upper and lower punch shaft bores with 4.8 mm keyways for guided tooling • Chamber filling shoe • Hard-chromed turret • Main compression force measurement including display on operator terminal • Accessory set Type 8 MX: o 4 blind dies EU-B o 4 blind dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP Panel possible.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jumlah sumbu: 3, This 3-axis CNC woodworking center, IMA BIMA 410, was manufactured in 2000. It features a working area of 3000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking for high-quality woodworking capabilities, you should consider the IMA BIMA 410, which we are offering for sale. Please contact us for further details. Working area X: 3000 mm Working area Y: 1200 mm Max. clamping height Z1: 100 mm Max. workpiece thickness Z2: depending on configuration/application Table height: approx. 1000 mm Pendulum operation X: 2 × 1400 mm Clearance in center X: 200 mm Alternative pendulum operation X: 2 × 900 mm Alternative center clearance X: 1200 mm Machine weight: approx. 6000 kg Guide system: precision linear guides, hardened approx. 62 HRC Central lubrication: automatic for all main axes and ball screw Drive system: AC servo motors with encoders X/Y drive: rack and pinion Z drive: ball screw Feed speed: 40 m/min Rapid traverse X/Y: 80 m/min Rapid traverse Z: 25 m/min Acceleration: 3 m/s² Crsdpfx Aoy Aw N Ujg Deb Main spindle extraction port: 300 mm Drilling spindle extraction port: 120 mm Air velocity: approx. 28 m/s Air volume: approx. 7080 m³/h Vacuum pump capacity: 100 m³/h Compressed air connection: 1/2" Operating air pressure: 6 bar Control voltage: 24 V DC Connected load: approx. 24 kVA Power supply: 3/N/PE 400/230 V 50 Hz Frequency inverter: 0-480 Hz Ambient temperature: +15 to +35 °C Control system: IMATRONIC NT 231 Interpolation: linear all axes, circular 2.5D Resolution: 0.001 mm Spindle: HSK F63 Tool clamping force: 11000 N Max. tool weight: 6 kg Speed range: 1500-18000 rpm Spindle power: 7.5 kW Cooling: water-cooled CNC axis: 360° rotatable Tool magazine type: plate changer Tool positions: 18 Maximum tool length: 150 mm Maximum tool diameter: 100 mm (150 mm with empty adjacent positions) Maximum load: 60 kg Saw unit motor: 1.5 kW Saw speed: 5600 rpm Max. saw blade diameter: 150 mm Drilling unit: 14 spindles Spindle stroke: 70 mm Drive: 2.2 kW Speed: 3150 rpm Max. drill diameter: 20 mm Adapter head spindles: 4 Max. speed: 6000 rpm Max. drill diameter: 12 mm Table equipment: 6 adjustable support arms 12 suction cups 114 × 159 × 100 mm 6 suction cups 125 × 75 × 100 mm Vacuum system: 2-circuit clamping system Control cabinet size: 2000 × 1800 × 600 mm DEFECT: The main spindle no longer releases the exchangeable drilling head.

Kondisi: bekas, nomor mesin/kendaraan: 006561, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA Mesin pelapis tepi: Mesin 1 Lebar maksimum panel: 2800 mm Unit kerja, sisi kanan: 11 unit Unit kerja, sisi kiri: 11 unit Cedpfx Agoyzplfs Dorb

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, kecepatan pemakanan sumbu X: 30 m/menit, model controller: ICOS OPEN, The machine has the following configuration: Cedeyzy Iwjpfx Ag Dorb Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge pull scraper Manufacturer model: 08.519 Unit: Glue pull scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for edge banding rolls Tank for hot-melt adhesive Pressure roller unit for the edge Pressure with rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 6089

Kondisi: baik (bekas), Tahun pembuatan: 1989, Mesin dengan perlengkapan lengkap Panjang sekitar 9 m Penyambungan Crsdpfx Asf Ua R Heg Dob Pemotongan tepian Pra-frais Frais pembulatan Penyalinan sudut Pisau tarik Poles Penyalinan sudut

Kondisi: bekas, Meja putar, rotator pengelasan, IMA MA Retainer AK2, mesin bekas Produsen: IMA Automation GMBH Tipe: MA Retainer AK2 Dimensi keseluruhan: Lebar: 1480 mm Cjdpfxsxupz Dj Ag Dorb Kedalaman: 1480 mm Tinggi: 1620 mm Data listrik: 400V; Diameter meja: 860 mm

Kondisi: diremaj di bengkel (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Csdpfx Ajyyya Djg Derb Edge thickness in laths/strips (min/max) mm: 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMAT PROCESSING (per side): - Spraying device (for liquid anti-adhesive) - Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (per side): - Gluing unit (hot melt adhesive + premelter) VTG + 283.205 - Pressure zone (CNC controlled) + edge magazine for rolls (No. 6 fold) - End trimming unit 08.42/30/B (2 x 0.66 kW) Max 30 m/min - Milling unit 08.055 (1 x 2 kW) 0°-30° - Contour milling unit (for fine finishing) CNC controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Spraying units (for polishing fluid) - Buffing unit 08.617-2 (2 x 0.18 kW)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 20787, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Center. The machine features a gantry construction, designed for the production of furniture, staircases, and special components. A large Z-axis range (600 mm) allows for the machining of tall workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled via IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC woodworking machining center (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z axis – large clearance) • Number of axes: 3–5 (depending on configuration and operating head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Spindle speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 🪚 Machining Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • lock case milling • grooving saw • fitting aggregates (Blum / Lamello) • angle head aggregates 🧲 Work Table • Vacuum pod & rail table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min Cjdpfx Agjyky Hde Dsrb • Z: up to approx. 25 m/min 💻 Control System • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • Approx. 6,500 – 8,500 kg (depending on configuration)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 24406, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 900 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – technical specifications (main) 🔹 Working area (axis travels) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, panel nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions Codeykn Dwspfx Ag Derb 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Functions and equipment (typical) • 5-sided drilling (top + X+/X−/Y+/Y− edges) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel cutting combined with machining) • Automatic lubrication • Waste and chip conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture typically found on the market: approx. 2010–2016 (often 2014) • Application: furniture, MDF panels, HPL, solid wood, nesting

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW Codpfxjtixpue Ag Dorb WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 24205, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 4.800 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 100 mm, panjang benda kerja (maks.): 4.800 mm, lebar benda kerja (maks.): 1.800 mm, jumlah slot dalam magazin alat: 18, berat keseluruhan: 16.000 kg, daya motor spindle: 12.000 W, jumlah spindel: 1, diameter benda kerja (maks.): 1.800 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Außergewöhnliche Maschine mit herausragender Bearbeitungsqualität. Die Maschine wurde durch IMA-Techniker gewartet, wobei ausschließlich Original-Ersatzteile verwendet wurden. Die Lichtwellenleiter sowie die Mehrheit der Druckluftleitungen wurden durch Neuteile ersetzt. Die automatische Positionierung der Vakuumsauger beschleunigt die Einrichtzeit erheblich. Mit ImaWoop Version 6.0 inklusive Quicktool gestaltet sich die Bedienung besonders benutzerfreundlich. Eine Besichtigung der Maschine im Betrieb ist jederzeit möglich. Alternativ bieten wir Ihnen gerne eine Live-Videoübertragung zur Visualisierung der laufenden Maschine an. CNC-Portal-Bearbeitungszentrum Hersteller: IMA Typ: BIMA P 480 V, 180/480 Baujahr: 2001 Kurzbeschreibung: Hochflexible Maschine für vielseitige, komplexe Bearbeitungsaufgaben (Fräsen, Bohren, Sägen, Kantenanleimung, diverse Winkelschnitte) - alternierende Bearbeitung - X = 2 x 2.400 mm, Y = 1.800 mm - Hauptspindel 12 kW - 18-fach Werkzeugwechsler - Kantenanleimaggregat mit 6-fach Rollenmagazin Beschreibung: Bearbeitungsbereich mit Standardaggregaten: Y = 1.800 mm Tischbereich für alternierende Bearbeitung: Csdpfxjtt Rpwj Ag Dsrb X = 2 x 2.400 mm (Fräs- und Bohrbearbeitung) X = 2 x 2.100 mm (Kantenanleimung) CNC-Steuerung: IMATRONIC NT 231 Software: ImaWoop 6.0 - automatische Positionierung der Vakuum­sauger - automatische Zentralschmierung - Förderband für Späne und Abfall (Bandförderer) Hauptspindel 12 kW mit integrierter C-Achse (360 Grad) Automatischer 18-fach Werkzeug-/Adapterwechsler 1 Kantenanleimaggregat VT100 mit Leimauftragseinheit - Kantenstärke: 0,4 – 3 mm - Für 4-seitige Kantenanleimung und umlaufende Kantenanleimung auf Stoß - 6-fach Rollenmagazin 1 Endbesäumaggregat, 0,8 kW Inklusive Adapteraggregate: - Säge, fest 90 Grad - Horizontalbohraggregat (4-fach) - ABS-Kantenfräsaggregat - ABS-Kantenradius- und Flächenabziehaggregat Weitere Adapter und Werkzeuge gegen Aufpreis verfügbar Spanabtransport über Gurtförderer Klimatisierter Schaltschrank inklusive

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED FORMATTING AND EDGE BANDING MACHINE – First (1st) machine in a production line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) FORMATTING UNIT (each side): Spraying unit (for liquid non-stick agent) Milling unit (2 x 8 kW) EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (number of compartments): 6 Servo-drive guillotine shear (for cutting edges) Pressure zone (CNC-controlled) Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Csdpeyypi Uefx Ag Derb Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Spraying unit (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°–90° / 180°–270°

Kondisi: sangat baik (bekas), 4-sided FORMAT AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Comprising the following machines: Crsdpfx Aoyyb Sueg Djb A) Loading unit "IMA" (bridge design) with double pick-up station, featuring a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided formatting and edge banding machine "IMA" model Combima/N/II/230/A/R3 (1300 mm) C) Rotating unit (for longitudinal-to-transverse orientation) "IMA" D) 2nd double-sided formatting and edge banding machine "IMA" model Combima / II / 740 / B / R3 + (3300 mm) with KFA 30 (contour milling unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical drilling supports) F) Motorized roller conveyor "IMA" G) Rotating unit (for transverse-to-longitudinal orientation) "IMA" H) Stacking unit "IMA" (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transport of panel stacks from the unloader.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Lem Pinggir Advantage 4612F - rutin diservis, tahun pembuatan 2002 - panjang total 6000 mm - lebar 1100 mm - tinggi 1900 mm - berat 3100 kg - kecepatan makan 12 m/menit - ukuran benda kerja: lebar 65 mm, tebal maks.: 45 mm, tebal min.: 10 mm, panjang: 150 mm, tinggi pinggiran 55 mm, tekanan 7 bar - dengan dua tangki yang dapat diganti - pra-milling, pemotongan rata, agregat multifungsi, pisau profil & permukaan, pemolesan - dengan agregat pra-milling Crsdpfex Srp Isx Ag Djb Transportasi tersedia dengan biaya tambahan!

Kondisi: sangat baik (bekas), de-hu-01 Csdpfx Ajyxl Sieg Dorb

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, IMA BIMA CUT Rentang kerja (perpindahan sumbu) • Sumbu X: ± 3300 mm • Sumbu Y: ± 1450 mm • Jumlah sumbu: 3 (umumnya X, Y, Z) Spindle • Daya spindle: ± 18 kW dan 12 kW • Penggunaan: milling, pengeboran, nesting panel, pelapisan lengkung Magasin alat • Pergantian alat otomatis (ATC): hingga 18 posisi Sistem penjepit material • Meja vakum dengan balok dan cup penghisap yang diposisikan otomatis 🛠️ Fitur & perlengkapan (standar) • Pengeboran dari 5 sisi (atas + sisi X+/X−/Y+/Y−) • Agregat gergaji untuk pemotongan dan penggrooving • Opsi agregat milling horizontal (HBO) • Meja pemuatan & pembongkaran otomatis (tergantung konfigurasi) • Sistem nesting (pemotongan panel dengan pemrosesan simultan) Crjdpfx Aeyzc Nksg Deb • Pelumasan otomatis • Pembuangan limbah dan serbuk (konveyor sabuk)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 70004, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Parameter teknis Crsdpfx Ageyzc Igj Dob Dimensi - panjang: 9,8 m - lebar: 1,5 m - tinggi: 1,8 m Daya motor: 40 kW Perlengkapan - kecepatan pengumpanan: 6 - 30 m/menit - ketebalan panel: min. 8 mm, maks. 60 mm - lebar panel (dengan tepi): min. 65 mm (untuk ketebalan tepi 0,4 - 3 mm) - panjang panel: min. 150 mm - tinggi tepi: min. 14 mm, maks. 65 mm - ketebalan tepi: min. 0,4 mm, maks. 20 mm

Kondisi: bekas, Tahun pembuatan: 2004, Mixer/granulator high shear stainless steel bekas IMA model VORTEX 075. - Produsen: IMA - Model: Vortex 075 - Kapasitas bejana: total 85 liter, kapasitas kerja min/maks 8/40 kg - Tutup bejana dan katup outlet dioperasikan secara pneumatik - Termasuk: panel kontrol lokal dan switchboard Sistem pencampuran: - Impeller agitator digerakkan oleh motor 3,0 kW, kecepatan maksimum 118 rpm - Chopper digerakkan oleh motor 1,5 kW, kecepatan 3000 rpm Cedpewm Atmofx Ag Dorb

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Cjdpfevxhnusx Ag Dorb Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Crsdpfx Aswbp Nwog Dsb Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Crodpfxsfi Tg He Ag Deb Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Edge banding machine Manufacturer: IMA Csdpfx Asv T R Erog Derb Model: Quadromat 3512 U Year of manufacture: 1999 Suitable edge materials: Veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Spindle speed: 18,000 rpm End trimming unit Milling units Profile scraping blades Buffing unit Flat scraping blades

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Cjdpjyhbiuofx Ag Derb

Kondisi: bekas, nomor mesin/kendaraan: 007840, f6f651aa Cedpfx Aeyg Eg Iog Dorb

Kondisi: bekas, nomor mesin/kendaraan: 007841, arbeitsbereich_achse_x-arbeitsbereich_achse_y-arbeitsebene-leist ung_haupt_spindel-anz_kontrollierte_achsen-maximale_kantenhohe-an zahl_werkzeugplatze Crjdpoyg Ef Dofx Ag Djb