Beli Krauss-Maffei Pleiger Mos 6500 bekas (1.270)

Kondisi: bekas, Krauss Maffei unit pengganti, tinggi 410 mm - tinggi 410 mm - diambil dari Krauss Maffei KM 200 - dilepas dari mesin yang sedang beroperasi - berfungsi penuh Produsen: Krauss Maffei Hedjrr Efnopfx Al Iol Kondisi: bekas

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Hedotrbcbopfx Al Iel Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mould installation height: 1100-1800 mm Injection volume: 5195 cc Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition. -    Additionally, complete cutting units available. -    Includes a conveyor belt and robot systems (model year 2012).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 57.752 h, gaya penjepit: 13.000 kN, diameter sekrup: 105 mm, berat keseluruhan: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC, which we are offering for sale. Contact us for further details. • International specification: 12000 MC / 1300 • Operating hours: 57,752 h • Mains voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor circuit breaker: 315 A • Heater circuit breaker: 250 A • Main switch: 6-pole, heating and power separately switched • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Housing cooling fan Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Hodpfxjyx Ez Rs Al Ijl Clamping Unit • Hydraulic-mechanical two-platen clamping system • 4 pressure pads integrated into the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety gate on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant design • Screw diameter: 105 mm • Integrated check valve • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via display • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners • Adaptive temperature controllers • Maximum controller power: 2 kW • Controller supply: 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data saving for up to 20,000 cycles • Event log • Alarm history • Graphical process curves • Trend graphics for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature measuring device 20 mA • Central computer interface • PDA interface with 5 contacts • Volt-free contact for dosing unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 111.569 h, gaya penjepit: 10.000 kN, This 6-axis hydraulic injection moulding machine Krauss Maffei 1000-8000 M was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine has an injection pressure limit of 185 bar and a dosing stroke of approximately 465 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1000-8000 M we are offering for sale. Contact us for further details. • Injection unit • Screw rotation speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection stroke: 200 mm forward movement actually used for shot injection • Dosing stroke: approx. 465 mm max. screw stroke during plasticising • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar Hsdpfx Ajywlvrjl Isl • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Clamping pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Sample values for cylinder heater capacities: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance-relevant data • Machine alignment tolerance:

Kondisi: baik (bekas), Tahun pembuatan: 2011, 18586_KM180750AX_DE Hedpfxew E E Eve Al Iel

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hjdpfx Alex D Hxle Iol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: Hedsyv E Nvjpfx Al Iol - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin injection Krauss Maffei KM 160–1000 CX 🔹 Informasi utama Produsen: Krauss Maffei Model: KM 160–1000 CX Tahun produksi: 2012 Jam kerja: 57.654 jam Kategori: Mesin injection hidrolik 🔧 Unit penutup Gaya penekanan: 1.600 kN (160 ton) Ukuran pelat: 820 × 845 mm Jarak antar kolom: 520 × 520 mm Tinggi minimum cetakan: 300 mm Maks. langkah pembukaan: 950 mm 💉 Unit injeksi Diameter screw: 50 mm Hedpfxoyv E E Dj Al Iel Volume injeksi: 432 cm³ Berat injeksi: 393 g Tekanan injeksi: 2.304 bar ⚡ Sistem elektro-hidrolik Daya motor pompa: 37 kW Daya elemen pemanas: 18,7 kW 👉 Dapat dipasang sistem penghemat energi (ESS) – penghematan energi nyata hingga 30–60% 📐 Dimensi & berat Berat mesin: 9 ton Dimensi (P × L × T): 5,54 × 2,06 × 2,18 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, wtryskarka-krauss-maffei-km-800-5000-mc Hsdpfx Alexqh I Is Iel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% Hedpfx Aloyugkwo Iol - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX Basic Specifications Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour screen integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticising unit for thermoplastics processing with abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (horizontal × vertical): 2210 × 1910 mm Tie bar spacing (horizontal × vertical): 1550 × 1250 mm Mould opening stroke: 2000 mm Minimum mould height: 600 mm Maximum mould height: 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1758 bar Injection volume: 6786 cm³ Shot weight (PS): 6175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electrical and Hydraulic Equipment Rated pump motor power: 132 kW Installed heating power: 82 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2440 l Machine Dimensions and Weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) Hedoyugfzjpfx Al Isl The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to current demand throughout the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - Globally recognized, proven technology applied in plastics processing industry - Decreased energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system enables significant reduction of operating costs while maintaining full production performance parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Injection Moulding Machine KRAUSS MAFFEI KM 4000-24500 MC with optional ESS Energy Saving System Basic Information Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3,315 × 2,920 mm Tie bar spacing: 2,240 × 1,800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Maximum injection pressure: 1,843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electrical-Hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of cylinder heating zones: 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Hodeyuf N Ejpfx Al Isl Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor by using a frequency inverter that adjusts the motor speed to the machine's actual demand during the production cycle. As a result, electrical energy is consumed only when truly needed. Key Benefits of the ESS System • Reduction of electrical energy consumption by up to 30% • Hydraulic pump servo drive technology • World-class and proven technology used in plastics processing industry • Reduced energy consumption during machine idle time • Lower hydraulic system heat generation • Extended service life of the motor and hydraulic components • Retrofit possible for existing hydraulic injection moulding machines without modification to the machine's structure The ESS system offers a state-of-the-art solution, enabling a significant reduction in the operating costs of the injection moulding machine while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001 Hedpfx Aeyrrwkol Ijl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Year of manufacture: 2011, Arm reach: 1717 mm, Hjdpfotxymmex Al Iel Weight: 20 kg, Controller: DX100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250-4 haul-off unit Hjdou Rda Ijpfx Al Ijl - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, KRAUSS MAFFEI KM 4000-24500 MC Injection Molding Machine _____ Basic Data • Year of Manufacture: 2003 • Control System: MC4 • Software Languages: Swedish, German, English _____ Hodpoyifg Dofx Al Ijl Clamping Unit • Clamping Force: 40,000 kN • Mold Opening Force: 2,525 kN • Platen Dimensions (horizontal × vertical): 3,315 × 2,920 mm • Tie Bar Spacing (horizontal × vertical): 2,240 × 1,800 mm • Mold Opening Stroke: 3,100 mm • Min./Max. Mold Height: 1,100 – 2,000 mm • Max. Daylight: 4,200 mm • Ejector Stroke: 350 mm • Ejector Force (forward / return): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw Diameter: 150 mm • L/D Ratio: 23 • Max. Injection Pressure: 1,843 bar • Injection Volume: 13,254 cm³ • Shot Weight (PS): 12,061 g • Injection Rate: 1,431 cm³/s • Plasticizing Rate: 266 g/s _____ Electro-Hydraulic System • Hydraulic Pump Motor Power: 200 kW • Installed Heater Power: 159 kW • Number of Cylinder Heating Zones: 7 • Dry Cycle Time (Euromap 6): 270 cycles/h • Hydraulic Oil Tank Capacity: 2,700 l _____ Machine Dimensions and Weight • Machine Dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine Weight: 247 t • Max. Mold Weight: 90,000 kg

Tahun pembuatan: 1998, Kondisi: baik (bekas), Bagian dari lini ekstrusi langsung lama untuk pipa (yang juga masih tersedia). Hodpfxox S Rims Al Ijl Mesin ini dilengkapi dengan komponen berikut: - Dosing Colortronic 4 Komponen (kontrol baru pada tahun 2017) - Berstorff KMC 85/2 (sekrup diperbarui tahun 2019) - Sidefeeder - Kontrol lengkap untuk dosing dan extruder - Tempering oli tunggal - Pompa leleh Maag

Kondisi: bekas, CNC control, control cards, MC3 controller, plug-in cards, printed circuit boards, electronic housings Hodpjnch Iijfx Al Iol - Manufacturer: Krauss Maffei, control module from injection molding machine - Electronic module: HU 100 5089750 3AO63 - Electronic housing: Phoenix Contact type UEGM - Quantity: 14 modules available - Dimensions: 90/25/H85 mm - Weight: 0.1 kg/unit.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp system (three-plate design) with a servo-electric drive for the clamping unit. Injection unit fitted with servo-electric drives for injection, plasticizing, and unit movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 3,200 kN Mould opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mould opening stroke: 650 mm Mould height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Injection volume: 1,078 cm³ Hedpfx Aljyft Nzs Ijl Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw rotation speed: 191 rpm Plasticizing capacity: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Hjdpfx Aloydbbvo Isl Injection volume: 1608 cm³ Injection weight (PS): 1464 g Injection flow rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Dosing unit colourant control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Kondisi: baik (bekas), Hydraulikpumpe-de Hsdeg Avqcopfx Al Ijl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 9.585 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, volume langkah: 523 cm³, tekanan injeksi: 1.904 batang, panjang total: 6.700 mm, lebar total: 1.600 mm, tinggi total: 2.300 mm, berat keseluruhan: 10.900 kg, translate_01 Hjdpfx Aloy Aktme Ijl

Kondisi: baik (bekas), Unidad de inyección Krauss-Maffei 220 (completa) con husillo accionado eléctricamente. Diámetro de husillo 40 mm. Hodefwcrnspfx Al Iel

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Mesin cetak injeksi Krauss-Maffei 160 ton, tahun pembuatan 2006, dengan konveyor. Diameter ulir 35 mm, 2 penarik inti, 6 zona hot runner. Mesin ini diserahkan setelah direkondisi oleh kami dan dapat didemonstrasikan dalam kondisi terhubung listrik di tempat kami! Hedpjh Dh Dujfx Al Iel

Kondisi: diremaj di bengkel (bekas), We have several Krauss-Maffei MC3 control units available, tested and in good working condition. Hjdpfx Ajt Uzbpjl Ijl