Beli Kraussmaffei Km 1150/4300 Mx bekas (10.989)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KM1300-8100MX-2016 Pjdpfxsy Emurs Adisgp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, berat injeksi: 2.452 g, en Psdpfjyyxc Dsx Adiegp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Pgjdpjy Apdqsfx Adisp Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 unit mesin cetak injeksi bekas Produsen: KRAUSS MAFFEI Tipe: KM500-4300CX Tahun pembuatan: 2010 Gaya penutup: 500 ton Jarak antar tiang: 900 x 900 mm Diameter sekrup: 90 mm Volume injeksi maksimum: 2.290 cm³ Berat bagian yang dicetak: 1.777 g/siklus Sistem kontrol: MC5 Psdpjx Tbfuofx Adisgp Perlengkapan: 2 unit penggerak inti Robot Wittmann Sistem pengaturan saluran zona panas 12 titik Antarmuka ke perangkat pengatur suhu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de-maschine-1 Pgodpfezl Svrex Adisp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, gebraucht-spritzgiessmaschine-krauss-maffei-KM420-4300CX-2012 Pjdpoyak Ecofx Adiogp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Pgsdoxak Ucjpfx Adiep Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Mesin injeksi Krauss Maffei KM 80-380 CX Tahun produksi: 2010 Unit penutup Gaya penekanan: 800 kN Dimensi pelat penahan (H × V): 670 × 670 mm Jarak antar kolom (H × V): 420 × 420 mm Tinggi cetakan (min./maks.): 250 mm Bukaan maksimum: 750 mm Unit injeksi Diameter sekrup: 40 mm Volume injeksi: 201 cm³ Berat injeksi (PS): 183 g Tekanan injeksi: 1860 bar Peralatan elektro-hidrolik Podjxw Upfepfx Adisgp Daya motor pompa: 15 kW Daya pemanas: 10,9 kW Dimensi dan berat Dimensi mesin (p × l × t): 4,09 × 1,48 × 2,02 m Berat (dengan panel kontrol): 3,55 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Mesin Injeksi Krauss Maffei KM 160-380 CX Tahun Pembuatan - 2005 Jumlah Jam Kerja - 34.200 Sistem penutup sepenuhnya hidraulik. Sistem kontrol MC5 dengan monitor berwarna, panel kontrol terintegrasi, dan 3 port USB bawaan. Unit Plastifikasi Unit plastifikasi lengkap untuk termoplastik dalam versi dengan perlindungan abrasif, dengan diameter sekrup 40 mm, dengan pengunci balik dan nosel terbuka. SPESIFIKASI TEKNIS MESIN DALAM KONFIGURASI STANDAR Unit Penutup - Gaya penutupan cetakan: kN 1600 - Gaya pembukaan cetakan: kN 86,4 - Dimensi pelat pemasangan (t x l): mm 820 x 845 - Jarak antar kolom (t x l): mm 520 x 520 - Jarak pembukaan cetakan: mm 650 - Tinggi cetakan: mm 300 - Langkah pembukaan pelat: mm 950 - Langkah ejektor: mm 150 - Gaya ejektor: kN 22,6/9,9 Unit Injeksi Psdswa Svkjpfx Adisgp - Diameter sekrup: mm 40 - Tekanan injeksi: bar 1860 - Volume injeksi: cm3 201 - Berat injeksi untuk PS: g 183 - Jumlah putaran sekrup, standar, opsi: putaran/menit 390/490 Peralatan elektrik dan hidraulik - Daya terukur motor pompa: kW 22 - Daya terpasang pemanas: kW 10,97 - Jumlah zona pemanas silinder: - 5 - Jumlah siklus kering sesuai Euromap: 1/jam 1600 - Kapasitas tangki oli: l 489 Dimensi dan Berat - Berat bersih dengan kabinet kontrol: t 6,0 - Dimensi mesin (p x l x t): m 4,6 x 1,6 x 2,1

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Mesin Injeksi Hidrolik Krauss Maffei KM 50-55 CX Tahun produksi - 2022 Picker STAR Sistem penutupan sepenuhnya hidrolik. Sistem kontrol MC 6 berbasis komputer industri dengan teknologi Ethernet waktu nyata, dilengkapi dengan panel kontrol terintegrasi berukuran 21,5” dengan layar sentuh berwarna. Unit plastifikasi Unit plastifikasi lengkap untuk termoplastik dengan diameter screw 18 mm, dilengkapi katup pengunci mundur dan nozzle terbuka Radius nozzle 10 mm, lubang nozzle 4 mm SPESIFIKASI TEKNIS MESIN STANDAR Unit penutupan - Gaya penjepit mould: kN 500 - Gaya pembukaan mould: kN 40 - Ukuran pelat penjepit (h x v): mm 600 x 600 - Jarak antar kolom (h x v): mm 370 x 370 - Langkah pembukaan mould: mm 400 - Tinggi mould minimum: mm 200 - Lebar pembukaan: mm 600 - Langkah ejektor: mm 100 - Gaya ejektor maju/mundur: kN 23 / 10 Unit injeksi - Diameter screw: mm 18 - Rasio L/D: - 22,2 - Tekanan injeksi: bar 2500 - Volume injeksi: cm3 20 - Berat injeksi 1): g 19 - Kecepatan injeksi: mm/dtk 150 - Kapasitas injeksi standar: cm3/dtk 38 - Putaran screw standar: rpm 450 - Kapasitas plastifikasi 1): - pada putaran screw standar: g/dtk 4,0 Perlengkapan listrik-hidrolik - Daya nominal motor pompa: kW 11 - Daya pemanas terpasang: kW 3,8 Podpfszhwl Rex Adijgp - Jumlah zona pemanas silinder: - 4 - Waktu siklus kering / langkah sesuai Euromap 6 2): dtk/mm 1,2 / 259 - Kapasitas tangki oli: l 180 Dimensi dan berat - Berat bersih dengan lemari kontrol: t 2,55 - Dimensi mesin (p x l x t) 3): m 3,53 x 1,41 x 1,96

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Podpfx Asx Thzpodijgp Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: - screw diameter: 50 mm - check valve, open nozzle - nozzle radius: 10 mm - nozzle orifice: 4 mm Technical Specifications Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN - Movable platen force: - opening: 44.8 kN - closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar clearance (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ - Shot weight (PS): 357 g - Screw speed (std/opt): 390 / 490 rpm Electrical and Hydraulic Equipment - Rated pump motor power: 22 kW - Installed heating capacity: 10.97 kW - Number of barrel heating zones: 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions & Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Krauss Maffei KM 350-3000 CX Injection Moulding Machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial real-time Ethernet computer, equipped with an integrated 19-inch control panel with a colour touch screen, LED backlighting and visualisation of all running processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics in a wear-resistant configuration, featuring an 80 mm screw diameter, non-return valve, and open nozzle. TECHNICAL DATA – STANDARD VERSION Clamping Unit Clamping force: 3,500 kN Opening force: 221 kN Platen dimensions (h x v): 1,060 x 1,095 mm Tie bar clearance (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95/49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1,855 bar Injection volume: 1,608 cm³ Shot weight: 1,464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticising rate: 109.5 g/s Electrical and hydraulic equipment Rated pump motor power: 75 kW Installed heater power: 36 kW Number of heater zones: 7 Dry cycle time / stroke per Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and weight Net weight incl. control cabinet: 16.3 t Pjdpfjy Tp Rlsx Adiegp Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, wtryskarka-krauss-maffei-km-800-5000-mc Pedpfx Adjxqh I Ijiogp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Podpox Avhyjfx Adisgp Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle Pjdpfeyv E Nvjx Adiogp ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Pjdsw U Rcdspfx Adijgp Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Podjyugkwopfx Adiogp Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Mesin Injeksi Krauss Maffei KM 350–2700 C2+ Tahun Pembuatan: 2004 Pengontrol: MC4 Data Teknis Unit Penutup * Gaya Penutupan: 3500 kN (350 ton) * Dimensi Pelat: 1060 × 1095 mm * Jarak Kolom: 710 × 710 mm * Langkah Pembukaan: 920 mm * Pembukaan Maksimum: 1300 mm Pgodezkadbjpfx Adiop * Tinggi Cetakan Minimum: 380 mm * Langkah Pengeluaran: 250 mm * Gaya Pengeluaran: 95 / 48 kN Unit Injeksi * Diameter Sekrup: 80 mm * Tekanan Injeksi: 1829 bar * Volume Injeksi: 1433 cm³ * Berat Injeksi (PS): 1304 g * Kecepatan Rotasi Sekrup: 218 / 284 putaran/menit * Kapasitas Injeksi Maksimum: 1508 cm³/s Sistem Plastifikasi * Versi untuk Termoplastik * Perlindungan Abrasi * Katup Periksa * Nosel Terbuka Sistem Penggerak * Daya Motor Pompa: 75 kW * Daya Pemanas: 36 kW * Jumlah Zona Pemanas: 7 * Kapasitas Tangki Oli: 720 l * Waktu Siklus Kering (Euromap): 1550 siklus/jam Dimensi dan Berat * Dimensi (panjang × lebar × tinggi): 6910 × 2040 × 2410 mm * Berat Mesin: 16,7 ton Informasi Tambahan * Pengontrol MC4 dengan Monitor Berwarna * Mesin disesuaikan untuk modernisasi dengan sistem ESS (penghematan energi hingga 30–60%)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Mesin injeksi Krauss Maffei KM 50 - 100 AX Mesin injeksi elektrik Tahun produksi: 2011 Jam kerja: 47799 Bahasa operator: Jerman, Rumania, Ceko Pgjdpfx Adsv Hxgqeisp Unit penutup - Gaya penutupan cetakan: 500 kN - Gaya pembukaan cetakan: 39,9 kN - Dimensi pelat pemasangan (t x l): 510 x 460 mm - Jarak antar kolom (t x l): 410 x 360 mm Unit injeksi - Diameter sekrup: 25 mm - Tekanan injeksi: 2025 bar - Volume injeksi: 49 cm3 - Berat injeksi untuk PS: 45 g Dimensi dan berat - Berat bersih dengan panel kontrol: 3,9 t - Dimensi mesin (panjang x lebar x tinggi): 4,13 x 1,6 x 1,8 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin injection Krauss Maffei KM 160–1000 CX 🔹 Informasi utama Produsen: Krauss Maffei Model: KM 160–1000 CX Tahun produksi: 2012 Jam kerja: 57.654 jam Kategori: Mesin injection hidrolik 🔧 Unit penutup Gaya penekanan: 1.600 kN (160 ton) Ukuran pelat: 820 × 845 mm Jarak antar kolom: 520 × 520 mm Tinggi minimum cetakan: 300 mm Maks. langkah pembukaan: 950 mm 💉 Unit injeksi Diameter screw: 50 mm Volume injeksi: 432 cm³ Berat injeksi: 393 g Tekanan injeksi: 2.304 bar ⚡ Sistem elektro-hidrolik Daya motor pompa: 37 kW Daya elemen pemanas: 18,7 kW Pjdpfx Asyv E E Dsdiogp 👉 Dapat dipasang sistem penghemat energi (ESS) – penghematan energi nyata hingga 30–60% 📐 Dimensi & berat Berat mesin: 9 ton Dimensi (P × L × T): 5,54 × 2,06 × 2,18 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Krauss Maffei KM 300-2000 CX Injection Moulding Machine Year of manufacture: 2010 We offer a high-quality hydraulic injection moulding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system featuring a colour monitor, integrated operator panel, and three USB ports. Thanks to its robust design and high performance, it is perfectly suited for the production of thermoplastic components. Equipment - Fully hydraulic clamping system - MC5 control system with colour monitor - Integrated control panel - 3 USB ports - Complete plasticising unit for thermoplastics - Ø 70 mm wear-resistant screw - Non-return valve - Open nozzle Technical Data Clamping Unit Parameter Value Clamping force 3000 kN Mould opening force 169.3 kN Platen movement force – opening 86.3 kN Platen movement force – closing 67.8 kN Platen size (h × v) 995 × 1050 mm Tie bar clearance (h × v) 630 × 630 mm Mould opening stroke 820 mm Minimum mould height 330 mm Maximum platen opening stroke 1150 mm Pedpfx Aeza Uuzediogp Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection Unit Parameter Value Screw diameter 70 mm Max. injection pressure 1877 bar Shot volume 1078 cm³ Shot weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw rotation speed 220 / 310 rpm Electro-Hydraulic System Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater capacity 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and Weight Parameter Value Net weight 14.5 t Dimensions (L × W × H) 6.5 × 2.2 × 2.3 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Mesin injeksi Krauss Maffei KM 800-5000 MC Tahun produksi: 2001 Perlengkapan: robot Rincian teknis: Gaya penutup: 8.000 kN Gaya maksimum pembukaan cetakan: 356 kN Gaya dorong pelat bergerak (pembukaan): 98 kN Gaya pelat bergerak (penutupan): 92 kN Ukuran pelat (lebar × tinggi): 1.610 × 1.530 mm Jarak antar kolom (lebar × tinggi): 1.120 × 1.000 mm Langkah pembukaan cetakan: 1.400 mm Pedpfx Ajzd Ta Nsdiogp Tinggi cetakan minimum: 600 mm Bukaan maksimum: 2.000 mm Langkah ejektor hidrolik: 250 mm Diameter sekrup: 90 mm Rasio L/D: 23 Tekanan injeksi: 1.742 bar Volume injeksi: 2.863 cm³ Berat injeksi (PS): 2.605 g Data umum mesin Dimensi (p × l × t): 10.500 × 2.860 × 2.890 mm Berat: 43.000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, en-Wtryskarka Krauss Maffei KM 420-2700 C2 Year of manufacture: 2002 Machine Description Psdpoxq Akkjfx Adijgp The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4,200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precise control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4,200 Max. mold opening force kN 250 Movable platen shift force – opening kN 124 Movable platen shift force – closing kN 102 Dimensions of mounting plates (H × L) mm 1,270 × 1,200 Clearance between tie bars (H × L) mm 800 × 800 Mold opening stroke mm 1,020 Minimum mold height mm 380 Maximum daylight mm 1,400 Ejector force (forward / backward) kN 95 / 48 Maximum mold weight kg 6,700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio – 20 Injection pressure bar 1,829 Shot volume cm³ 1,097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle pressure kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating capacity kW 36 Number of cylinder heating zones – 7 Oil tank capacity l 1,075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Pedox Elukopfx Adijgp Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Mesin Injeksi Krauss Maffei KM 300-2000 CX Tahun Pembuatan: 2010 Pengendali: MC5 Tipe: Mesin Injeksi Hidraulik Perlengkapan Sistem penguncian sepenuhnya hidraulik Pengendali MC5 dengan monitor berwarna Panel operator terintegrasi 3 port USB Pgodpfxozkafle Adiop Sistem plastifikasi untuk termoplastik Sekrup Ø 70 mm dengan perlindungan abrasi Penguncian balik Nozel terbuka Unit Penguncian Gaya penguncian: 3000 kN Dimensi pelat: 995 × 1050 mm Jarak antar kolom: 630 × 630 mm Langkah pembukaan: 820 mm Pembukaan maksimum: 1150 mm Tinggi cetakan minimum: 330 mm Langkah ejektor: 200 mm Gaya ejektor: 57,7 / 28,3 kN Unit Injeksi Diameter sekrup: 70 mm Tekanan injeksi: 1877 bar Volume injeksi: 1078 cm³ Berat injeksi (PS): 981 g Laju injeksi: 385 cm³/detik Laju injeksi dengan akumulator: 1155 cm³/detik Kecepatan putaran sekrup: 220 / 310 putaran/menit Sistem Plastifikasi Untuk termoplastik Perlindungan abrasi Penguncian balik Nozel terbuka Sistem Elektrohidraulik Daya motor pompa: 55 kW Daya pemanas: 29,2 kW Jumlah zona pemanas: 6 Jumlah siklus kering: 1350 siklus/jam Kapasitas tangki oli: 720 l Dimensi dan Berat Dimensi: 6500 × 2200 × 2300 mm Berat: 14,5 ton