Beli Pleiger Motor Hidrolik Pleiger F. Krauss Maffei bekas (54.664)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 42.519 h, gaya penjepit: 5.000 kN, diameter sekrup: 100 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin injeksi hidrolik dari tahun 2011. Krauss Maffei 500-4300 CX ini memiliki gaya penutupan 500 t dan diameter sekrup Ø 100 mm. Bukaan maksimum cetakan adalah 1530 mm dengan jarak antar tie bar 900 × 800 mm. Jika Anda sedang mencari mesin injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 500-4300 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Lodpey Tai Eefx Anuohg • Kapasitas injeksi PP: 1,5 kg • Dimensi minimum cetakan: 480 mm • Jarak antar tie bar (H × V): 900 × 800 mm • Bukaan maksimum cetakan: 1530 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 44.858 h, gaya penjepit: 4.200 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2011. Krauss Maffei 420-4300 CX ini memiliki gaya penutup 420 t dan diameter screw Ø 90 mm. Mesin ini menawarkan bukaan maksimum cetakan sebesar 1400 mm dan jarak antara batang 800 × 800 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, Krauss Maffei 420-4300 CX yang kami tawarkan ini patut dipertimbangkan. Hubungi kami untuk detail lebih lanjut mengenai mesin ini. Lodpfoy S Tw Hox Anujhg • Kapasitas injeksi (PP): 1,2 kg • Ukuran minimum cetakan: 380 mm • Jarak antar batang: 800 x 800 mm • Bukaan maksimum cetakan: 1400 mm • Jam operasi: 44.858 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 46.424 h, gaya penjepit: 3.500 kN, diameter sekrup: 80 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2012. Krauss Maffei 350-3000 CX ini memiliki gaya penutupan 350 t dan diameter ulir Ø 80 mm. Mesin ini menawarkan kapasitas injeksi PP sebesar 640 g dan bukaan maksimum cetakan 1260 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 350-3000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kapasitas injeksi PP: 640 g • Dimensi minimum cetakan: 380 mm Lhodpfx Ajy S Tvvsnueg • Jarak antar tie-bar: 710 × 710 mm • Maksimum bukaan cetakan: 1260 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 49.627 h, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2012. Krauss Maffei 300-2000 CX ini memiliki gaya penahan sebesar 300 t dan diameter sekrup Ø 70 mm. Bukaan maksimum cetakan adalah 1000 mm dan jarak antar kolom adalah 630 × 630 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 300-2000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Volume injeksi PP: 640 g • Ukuran minimum cetakan: 320 mm • Jarak antar kolom: 630 × 630 mm • Bukaan maksimum cetakan: 1000 mm Lhsdpfx Ansy S Tq Heujg • Jam operasi: 49.627 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 49.533 h, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2011. Krauss Maffei 300-2000 CX ini memiliki gaya penutupan sebesar 300 t dan diameter sekrup Ø 70 mm. Mesin ini memiliki bukaan maksimum cetakan sebesar 1000 mm dan jarak antar tie-bar 630 × 630 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 300-2000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kapasitas injeksi PP: 640 g • Dimensi minimum cetakan: 320 mm • Jarak antar tie-bar: 630 x 630 mm • Maksimum bukaan cetakan: 1000 mm • Jam operasional: 49.533 jam Ljdpfxey S Tqas Anushg

Kondisi: baik (bekas), Tahun pembuatan: 2010, Konveyor lurus untuk otomasi (misalnya "shift hantu" penyangga sementara) Terdiri dari dua konveyor: pada satu konveyor terdapat karton kosong, sedangkan konveyor kedua berisi karton yang sudah terisi. Kedua konveyor dilengkapi dengan sistem antarmuka EUROMAP67. Dengan demikian, konveyor dapat diprogram bersama mesin dan robot pengambil. Produsen: KRAUSS MAFFEI Lhsdpfx Anoy Spixjujg Tahun pembuatan: 2010 Panjang konveyor: masing-masing 6,00 m Lebar total konveyor: 1,75 m

Tahun pembuatan: 2013, jam operasional: 42.681 h, Kondisi: siap digunakan (bekas), produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2013. Krauss Maffei 35-180 CX ini memiliki ukuran plastifikasi 180 dan diameter ulir 28 mm. Dengan 3 unit yang tersedia, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 35-180 CX ini. Hubungi kami untuk informasi lebih lanjut. • Ukuran plastifikasi: 180 • Pengaturan plastifikasi: H Ledoym Uv Sspfx Anushg • Diameter ulir: 28 mm • Radius nosel: 10 mm • Diameter lubang nosel: 4 mm • Tersedia 3 unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 6.500 kN, Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping force: 6500 kN Mold holding force: 455 kN Platen dimensions (H × V): 1540 × 1440 mm Space between tie bars (H × V): 1110 × 960 mm Max. mold height: 1450 mm Mold installation height (min./max.): 450 / 1000 mm Opening stroke: 1000 mm Ejector stroke: 250 mm Ejector force (forward/return): 95 / 49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 21.3 Injection pressure: 1538 bar Shot volume: 1284 cm³ Shot weight (PS): 1170 g Injection rate: 141 cm³/s Injection speed: 133 mm/s Lsdpsy Eyxdofx Anushg Injection power: 60 kW Plasticizing rate (PS): 139 g/s Installed heating power: 36 kW Nozzle retraction force: 7 kN Drive and Energy Installed pump power: 90 kW Dry cycle time (EUROMAP 6): 3.0777 s Dry cycle time (KM norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net weight: 12,000 kg Max. mold weight: 11,000 kg Oil tank capacity: 1,180 l

Kondisi: baik (bekas), Tahun pembuatan: 2014, 1 Lsdpsy Epp Asfx Anuohg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KM1300-8100MX-2016 Ledpfx Anjy Emurjuohg

Kondisi: baik (bekas), Tahun pembuatan: 2011, 18586 Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX Electric machines Year of manufacture: 2011 Clamping Unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar spacing (h x v): 560 × 510 mm Mold height min.: 200 mm Mold height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection Unit Screw diameter: 50 mm Injection volume: 393 cm³ Injection weight PS: 357 g Injection pressure: 1892 bar Dimensions and Weight Ledpfx Anew E E Evsuehg Dimensions LxWxH: 6.07 x 1.92 x 2.01 m Machine weight: 6500 kg Additional Information: 👉 Fully electric machine with maximum precision, minimal energy consumption, and highest process stability. This machine belongs to KraussMaffei’s proven AX series, renowned for its robust construction, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial products. Main features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial operation * Good spare parts availability The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated parts removal, thereby increasing productivity and reducing cycle times. With its balanced performance and flexibility, this machine offers a highly attractive solution for both technical parts and series production. The machine was manufactured in 2011 and, as visible in the pictures, is in good and fully functional condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 66.160 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, volume langkah: 679 cm³, Clamping force 3000 kN Maximum tool opening force 160 kN Moving platen opening force 86 kN Moving platen closing force 68 kN Mounting platen (H x V) 995 x 1050 mm Clear width (H x V) 630 x 630 mm Mold opening stroke 820 mm Minimum mold installation height 330 mm Opening width: 1150 mm Ejector stroke 200 mm Ejector force forward/backward 58 kN Injection unit: Screw diameter 60 mm L/D ratio 21 Injection pressure 2000 bar Shot volume 679 ccm Shot weight (PS) 618 g Injection flow rate 325 ccm/s Screw speed 259 rpm Plasticizing rate 58 g/s Nozzle contact force 110 kN Electrohydraulic equipment: Nominal power of pump motor 45 kW Installed heating power 23 kW Temperature control zones for barrel heating 6 Oil capacity 720 liters Dimensions and weights: Space requirement approx. 6.20 x 2.20 x 2.40 m Total weight 12500 kg Maximum mold weight 3430 kg Accessories: - Oscillation elements - 10-fold water manifold Additional equipment: Ljdoy Nk Uqspfx Anuehg - 1 x air valve - 3 x core pulls - 3 x hot runner controllers - Robot interface compliant with Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB Lhedpfx Ajyg Hz Hsnusg • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar Lhodpjydnp Hofx Anujg • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Lhodpsy Apdqofx Anueg Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Lhsdpfx Anoy Hqwyjueg Clamping unit: Clamping force [kN]: 13,000 Tie bar distance (H x V) [mm]: 1,570 x 1,270 Platen dimensions (H x V) [mm]: 2,210 x 1,910 Min./Max. mould height [mm]: 700–1,400 Max. daylight opening [mm]: 3,050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5,195 Shot weight PS [g]: 4,728 Injection pressure [bar]: 2,296 Max. injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Pump motor rated power [kW]: 132 Screw drive motor rated power [kW]: 145 Heater capacity [kW]: 71 Dimensions and weight: Net weight incl. control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner shut-off nozzle Hydraulic accumulator Cooling: 20 rotameter cooling circuits (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No Lodsyhby Hjpfx Anushg • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) Lhedpfx Aeyhbq Esnujg • Hot runner control: 12 zones • Cooling: 4 x HB 100

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mould installation height: 1100-1800 mm Ledpfstrbcbjx Anujhg Injection volume: 5195 cc Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition. -    Additionally, complete cutting units available. -    Includes a conveyor belt and robot systems (model year 2012).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 57.752 h, gaya penjepit: 13.000 kN, diameter sekrup: 105 mm, berat keseluruhan: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC, which we are offering for sale. Contact us for further details. • International specification: 12000 MC / 1300 • Operating hours: 57,752 h • Mains voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor circuit breaker: 315 A • Heater circuit breaker: 250 A • Main switch: 6-pole, heating and power separately switched • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Housing cooling fan Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical two-platen clamping system • 4 pressure pads integrated into the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety gate on operating side • Minimum mould height: 700 mm Lodeyx Ez Repfx Anuehg • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant design • Screw diameter: 105 mm • Integrated check valve • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via display • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners • Adaptive temperature controllers • Maximum controller power: 2 kW • Controller supply: 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data saving for up to 20,000 cycles • Event log • Alarm history • Graphical process curves • Trend graphics for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature measuring device 20 mA • Central computer interface • PDA interface with 5 contacts • Volt-free contact for dosing unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Krauss-Maffei KM 1150/4300 MX Mesin Injeksi Horizontal dari Krauss-Maffei dengan gaya penutupan 1150 ton. Tahun pembuatan 2014. Jam kerja: 35.640. Kontrol MC6. Fitur tambahan: Robot ABB 6 sumbu, 24 zona Hot Runner, sekuensial 10 pneumatik + 10 hidrolik. Dapat diperlihatkan dalam produksi. Rincian Teknis GAYA PENUTUPAN: 11500 kN JAM KERJA: 35.600 DIAMETER SEKRUP: 90 mm TEKANAN INJEKSI: 1839 BAR VOLUME INJEKSI: 2290 cm3 BERAT INJEKSI: 2084 gr LANGKAH PEMBUKAAN: 2000 mm DIMENSI PLATEN: 2210 x 1910 mm KETEBALAN CETAKAN MINIMUM: 600/1200 mm TAHUN PEMBUATAN: 2014 Ljdpfxoy Efkrj Anuehg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 111.569 h, gaya penjepit: 10.000 kN, This 6-axis hydraulic injection moulding machine Krauss Maffei 1000-8000 M was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine has an injection pressure limit of 185 bar and a dosing stroke of approximately 465 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1000-8000 M we are offering for sale. Contact us for further details. • Injection unit • Screw rotation speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection stroke: 200 mm forward movement actually used for shot injection • Dosing stroke: approx. 465 mm max. screw stroke during plasticising • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar Lhedsywlvrepfx Anueg • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Clamping pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Sample values for cylinder heater capacities: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance-relevant data • Machine alignment tolerance:

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Lhsdpfx Aox D Hxljnuog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) Lsdpeyv E Nvefx Anuohg 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m