Beli Romer Ruang Penyiraman Otomatis Dengan Dryin bekas (15.672)

Kondisi: baru, Tahun pembuatan: 2026, powder_coating_booth_kpp_desc Bdodpfx Aofy T Tbjiyoc

Tahun pembuatan: 2020, Kondisi: baru, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® comprises over 10,000 manufactured units that are in operation in more than 45 countries worldwide. ROMER® produces individual technological machines for powder coatings as well as complete, fully automatic turnkey coating lines. Bedpfx Aisfzq Ryoysdc ROMER® provides heating solutions for the aerospace and automotive industries for some of the world's leading companies. We offer warranty and post-warranty service for the equipment we sell, including a full range of spare parts.

Tahun pembuatan: 2020, Kondisi: baru, The use of a photocell in the part's working area enables measurement of its length, thus allowing the spray guns to be activated when the part enters their range and deactivated immediately after painting is completed. The photocell is included as standard equipment. Bdsdpfx Aofy T Areiyec Part identification with special tags. There are identification plates with holes mounted on the workpiece sling. Based on this, the PLC controller together with the photocell detects the painted part, turning the guns on and off at the right moment, thereby saving energy and powder coating. Vertical shape detection of the part. The use of light curtains with horizontal sensors allows the PLC controller to analyze the part’s vertical shape. The PLC calculates the expected time for the part to arrive within the gun area; this enables selective activation or deactivation of the guns. Utilization of light curtains with multiple sensors, both horizontal and vertical. This solution enables precise measurement of the part’s dimensions, allowing for manipulator control as well. Benefits of using photocells or light curtains include primarily the savings of powder and energy by avoiding paint application in areas with no part present. With light curtains, precise gun control is possible.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box Bodpofz U Rrefx Aiyodc • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Bsdpfjfz Apqsx Aiyedc Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Bodpfx Asfz Aw Hoiysdc Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Bdedpfxofz A Ils Aiyec Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also engaged in the production of overhead conveyor systems. Bdjdpfxofz Difj Aiysc Cross transfers (lateral transport systems) are designed and manufactured for specific installations. Examples of equipment are listed below: Transport systems Depending on customer requirements, the transport systems can either move on the floor or be suspended from rails. - For efficient solutions in manual installations, we recommend overhead cross beams (lateral transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an excellent solution for companies focused on quality and process repeatability. - For businesses that produce different items simultaneously and, for example, operate multiple booths with various colors, flexible solutions utilizing power-free conveyors are used. This is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes Bedpfsfz Dknex Aiyodc • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are distinguished by their quiet operation. They are capable of handling both simple, widely used processes as well as complex, multi-dimensional tasks. Programming is accomplished via a PLC control system. Suitable for operations with both long and short strokes. The toothed belt drive ensures quiet performance. Equipped with a maintenance-free AC motor. Slim column design saves space. The robust construction of the manipulators guarantees extensive capabilities and high stability. The manipulator features a 7" touchscreen panel or can be operated externally via the ModBus protocol using RJ45 cables. Bsdofz Dmmepfx Aiyedc

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The demineralized water station is used for the production of so-called demi water using ion exchange technology. The station consists of 3 columns: Bdodpfx Aefz Dwzoiyec - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 type demineralization stations feature fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, en-GB Bdedpfofz I Rmsx Aiyec

Tahun pembuatan: 2020, Kondisi: baru, en-GB Bdodpfx Asfz I R Reiyec

Tahun pembuatan: 2020, Kondisi: baru, en-GB Bdodpfxjfz I Sge Aiyec

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Bodpofz U Nbefx Aiyodc Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. Bdjdpfx Aiefzktzoyec All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2026, Kondisi: baru, powder-coating-booth-kph-de Bdsdpfx Ajfz Atbeiysc

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes Bedpfxofz Dkge Aiyjdc • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description: • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recovery with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refilling with paint from cardboard • Paint level sensor in refill box • An acoustic alarm warns the operator when the cardboard paint supply is low • The center is connected to the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection Bdodpofz Dqfjfx Aiyec • Number of filters: 8 pcs. • Filter area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L, 6-8 bar per shot • 50 L waste container capacity Description • Dust collector equipped with a high-efficiency radial impeller • Two operating modes – Full Power and ECO • The basic weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter features its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables. Bedpfx Asfz Dtzoiyodc

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology Bodpsfz Dvvofx Aiyedc User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, Automation Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, gives you the ability to activate the spray guns when the object is within range, and to immediately switch off the guns once the workpiece has been completed. The photoelectric sensor is included as standard equipment. Identification of parts using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, and thus reduces energy and powder consumption. Vertical detection of workpiece details By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the moment when the detail should appear in the gun zone, enabling the selective activation or deactivation of the guns. Use of light barriers with multiple sensors both horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling adjustment of the manipulators as well. Advantages of using light barriers and photoelectric sensors The main advantages of using photoelectric sensors or light barriers are energy and powder savings. Eliminate painting in zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Our lines can optionally be equipped with photoelectric sensors or light barriers. The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, to activate the guns when the object is within their range and to immediately switch off the gun once the workpiece has been completed. Identification of details using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, thus saving energy and powder. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the time when the detail appears in the gun chamber, enabling selective activation or deactivation of the guns. Bdjdpfx Aisflq Spjyoc Use of light barriers with multiple sensors horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling the manipulators to be adjusted as well. The advantages of using photoelectric sensors or light barriers are primarily powder and energy savings. Eliminate painting zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Gun array vertical 8 pcs. guns Control - profiControl 10" Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Os X MX-100 x 2 pcs. Horizontal gate - Horizontal gate W400 x 2 units Vertical gate - H2000 vertical gate Maximum painting speed is 1.65714285714286 m/min 0 pcs. tug units Airflow required: 10,188 m³/h Minimum cabin passage required: B900mm H2100mm Duct diameter: 500 mm - minimum 16.9 m/s, 16 m/s Air consumption: 1210 l/min + recommended SC-20 compressor Min. St

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called partial demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle Bedpfxsfz I Nho Aiyodc - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Bjdpfx Aiefz I Rxeyedc Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called semi-deionized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Piping Bdedefz I Syspfx Aiysc The columns are made of AISI316L stainless steel.