Beli Myford Mesin Penggiling Silinder Universal bekas (78.480)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Hodpfsvq R Uzox Ad Rer The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings Hjdpfxevx Dvuj Ad Rer - New X-axis spindle - Upper table re-ground - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP Paper band filter

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: Hsdpfxod Ih D Eo Ad Rer - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives. Hedpjuxftxefx Ad Ror

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Hsdjv I Eq Sspfx Ad Rsr Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Hsdpfxsvdk N Ee Ad Ror Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Hsdpfx Asuxfucod Rer Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system Hsdst Ii Nbspfx Ad Rsr - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Hodpfx Aet Ii Nusd Rjr Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Hjdpfxeuxfupe Ad Rsr Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Hedexbh Ebjpfx Ad Ror

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Hsdpfx Aeynmpgjd Rsr Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: siap digunakan (bekas), Weight: 2.2 t, including documentation. Hedpfx Ademqly Uo Rer

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Hjdpoywntyjfx Ad Rer

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A Karstens cylindrical grinding machine, originally from 1992 and completely overhauled and modernized in 2014, is available. Centre distance: 1000mm, centre height: 180mm, grinding diameter: 360mm, max. workpiece weight between centers/floating: 250kg/70kg, grinding wheel diameter: 400mm. Spindle taper: MK4, speed: 450rpm, swivel range: 90°, tailstock taper: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, feed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Includes 3 almost new centers and grinding wheels. Documentation available. Inspection on site possible. Hjdpfx Adev Sufts Ror

Kondisi: bekas, de-to-hu-it-lt-2024-06-13-01 Hjdpfx Ajyqv Udsd Rsr

Kondisi: baru, Kondisi baru Waktu pengiriman sekitar 4 bulan setelah pemesanan Negara asal Taiwan Harga 48.800 € Cicilan 932,08 € Kecepatan putaran 40 - 3200 RPM Pemasangan ISO 40 Area kerja 600 x 500 x 400 mm Meja 1000 x 500 mm Motor 3,75 kW Berat 1814 kg Kecepatan cepat/umpan pada semua 3 sumbu 1000 mm/menit Jumlah alur 8 Lebar x jarak 14 x 63 mm Beban meja maks. 300 kg Jarak perjalanan longitudinal 600 mm Jarak perjalanan transversal 500 mm Jarak perjalanan vertikal 400 mm Umpan variabel, area X,Y 0 - 600 mm/menit Umpan variabel, area Z 0 - 600 mm/menit Spindel horizontal, tingkat gigi 40 - 3200 Spindel vertikal, tingkat gigi 40 - 3200 Putaran spindel +/- 90° Langkah pin 100 mm Pemasangan alat secara manual Motor spindel 3,75 kW Meja vertikal 1200 x 250 mm Hodpfx Ajyrhrqod Rjr Jarak antara spindel frais vertikal - meja frais 160 - 660 mm Jarak antara spindel frais horizontal - meja frais 95 - 495 (alur-T ke-2), 180 mm Panel kontrol yang dapat diputar Tampilan digital 3 sumbu Fagor 400ib Innova Motor untuk spindel horizontal dan vertikal: 3,75 kW Motor umpan dengan inverter untuk X/Y/Z: 0,75 / 0,75 / 0,75 kW Sekrup bola untuk sumbu X/Y/Z Kotak gigi untuk kecepatan putaran spindel 1 buah mandrel frais panjang 27 mm 3 buah selongsong reduksi (MK1, MK2, MK3) 1 buah batang penjepit ISO40 untuk spindel horizontal atau vertikal Pelindung spindel dengan sakelar pengaman Pelindung di area kerja dengan pintu yang dilengkapi pengaman elektrik Penyangga untuk frais horizontal Lampu kerja LED Pelumasan otomatis untuk panduan X/Y/Z Roda tangan pengaman untuk sumbu X/Y/Z Sistem pendingin dengan wadah serpihan Penutup untuk sumbu X/Y/Z Pelat dasar dan baut Kotak peralatan dengan alat operasi Instruksi pengoperasian dalam bahasa Jerman atau Inggris Peralatan sesuai dengan CE

Kondisi: bekas, Tahun pembuatan: 2023, Kondisi: Bekas Tahun Pembuatan: 2023 Nomor Inventaris: 4546 Waktu Pengiriman: Segera, dengan catatan dapat terjual terlebih dahulu Negara Asal: Taiwan Harga: 32.800 € Tersedia: 1 unit Kecepatan Spindle: 65 - 2600 RPM Collet: ISO 40 Area Kerja: 420 x 220 x 380 mm Meja: 840 x 390 mm Motor: 2.2 kW Panjang: 1600 mm Lebar: 1700 mm Tinggi: 2000 mm Berat: 1145 kg Area Penjepitan Meja: 840 x 390 mm Kecepatan Cepat/Umpan di semua 3 sumbu: 1000 mm/menit Jumlah Slot Penjepit: 5 Lebar x Jarak: 14 x 63 mm Beban Maksimum Meja: 200 kg Rentang Pergerakan (sumbu X): 420 mm Rentang Pergerakan (sumbu Y): 220 mm Rentang Pergerakan (sumbu Z): 380 mm Umpan: Variabel, Rentang X, Y: 0 - 600 mm/menit Umpan: Variabel, Rentang Z: 0 - 600 mm/menit Spindle Horizontal, Tingkat Gigi: 65 - 2600 Jarak Sumbu Spindle dari Panduan Rangka: 90 - 310 mm Spindle Vertikal, Tingkat Gigi: 65 - 2600 Sudut Putar Spindle: +/- 90° Langkah Arbor: 100 mm Penjepitan Alat: Manual Motor Spindle: 2,2 kW Meja Vertikal: 950 x 250 mm Hedswirdgopfx Ad Rjr Jarak Spindle Pemotong Vertikal - Meja Pemotong: 90 - 310 mm Jarak Spindle Pemotong Horizontal - Meja Pemotong: 100 - 480 mm Mesin Demo / Kondisi Hampir Baru Harga Bersih (Harga Baru € 41.800,00) Panel Kontrol yang Dapat Diputar Tampilan Digital 3 Sumbu: Fagor 40i Innova Motor untuk Spindle Horizontal dan Vertikal: 2,2 kW Motor Umpan dengan Inverter untuk X/Y/Z: 0,35 / 0,35 / 0,75 kW Sekrup Bola untuk Sumbu X/Y/Z Kotak Gigi untuk Kecepatan Spindle 1 buah Arbor Pemotong Panjang 27 mm 3 buah Selongsong Reduksi (MK1, MK2, MK3) 1 buah Batang Penjepit ISO40 untuk Spindle Horizontal atau Vertikal Pelindung Spindle dengan Sakelar Pengaman Pelindung di Area Kerja dengan Pintu yang Dilengkapi Pengaman Listrik Penahan untuk Pemotongan Horizontal Lampu Kerja LED Pelumasan Otomatis untuk Panduan X/Y/Z Roda Tangan Pengaman untuk Sumbu X/Y/Z Sistem Pendingin dengan Wadah Serpihan Penutup untuk Sumbu X/Z Pelat dan Baut Pendukung Kotak Alat dengan Alat Operasi Instruksi Operasi dalam Bahasa Jerman atau Inggris Peralatan Sesuai dengan CE MEMBELI MESIN BEKAS ADALAH URUSAN KEPERCAYAAN - JANJI TRANSPARANSI KAMI Kami menawarkan keamanan dan transparansi penuh. • INFORMASI YANG JUJUR: Foto detail & video fungsi dari kondisi saat ini • PEMERIKSAAN LANGSUNG DI TEMPAT: Uji coba langsung di tempat kami • DEMO DIGITAL: Demo langsung individual melalui panggilan video • PEMBELIAN TANPA RISIKO: Hak pengembalian selama 14 hari Detail:

Kondisi: bekas, Tahun pembuatan: 1999, Detail teknis: Gerakan x: 2000 mm Gerakan y: 1500 mm Gerakan z: 1460 mm Motor spindle milling: 35/30 kW Taper spindle ISO: 50 Kecepatan spindle: 24 - 3000 rpm Luas meja: 1350 x 1550 mm Kapasitas beban meja: 6 t Kecepatan feeding: 10 - 3000 mm/menit Kecepatan pemindahan cepat: 10 m/menit Kebutuhan daya total: 48 kW Hedpfx Adev Rdzbe Rsr Berat mesin sekitar: 24 t dengan kontrol CNC HEIDENHAIN TNC 426 Sumbu B meja putar 360° Kepala milling putar otomatis horizontal - vertikal Berbagai aksesori

Kondisi: bekas, Tahun pembuatan: 1991, Detail Teknis: Jarak sumbu X: 500 mm Jarak sumbu Y: 380 mm Jarak sumbu Z: 350 mm Total kebutuhan daya: 8 kW Daya penggerak – penggerak utama: 2,2 kW Ukuran meja: 800 x 360 mm Dudukan perkakas: SK 40 Berat mesin sekitar: 1,8 t Dijual sebuah mesin frais perkakas universal MAHO MH 500 M. Mesin ini dilengkapi dengan layar digital 3 sumbu Heidenhain, kabin pelindung tertutup, sistem pendingin, serta pengumpan otomatis pada sumbu X, Y, dan Z. Mesin ini sangat cocok untuk pembuatan perkakas dan cetakan, produksi suku cadang tunggal, serta pekerjaan perbaikan dan presisi. Hjdpfszp Rzhex Ad Rer

Kondisi: sangat baik (bekas), x-Weg 450 mm y-Weg 175 mm z-Weg 400 mm Spindeldrehzahlen 60 - 2800 U/min Werkzeugaufnahme ISO SK-30 Maschinengewicht ca. 1 t Raumbedarf ca. 1,1 x 1 x 1,5 m Hodpfsvwgn Dex Ad Ror Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Kondisi: baik (bekas), Tahun pembuatan: 2000, 325299a3 Hsdpfx Adeykvayo Rsr

Kondisi: baik (bekas), Grindable, maximum diameter: 200 mm Centre distance: 450 mm Hsdpolz Nxwefx Ad Rsr Approximate machine weight: 2.2 t Machine dimensions:

Kondisi: bekas, Maximum grinding length: 1000 mm Maximum wheel diameter: 320 mm Hjdev Taafjpfx Ad Rsr Bore: 30 mm Manufacturer: TOS

Kondisi: hampir baru (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 225 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 1.600 mm, Mesin gerinda silinder CNC STUDER S40, tahun pembuatan 1995. Mesin dalam kondisi bekas yang baik. Data teknis: Hodpfx Ast N Ivcod Ror • Kontrol: Fanuc Series 16-GC • Kebutuhan ruang +/- (Tinggi/Panjang/Lebar): 250 cm / 650 cm / 320 cm Sumbu: • Jarak antara senter: 1.600 mm • Tinggi senter: 225 mm • 4 sumbu (X, Z, B, C) • Berat benda kerja maks. +/-: 100 kg Perlengkapan: • 2 batu gerinda + 1 batu gerinda dalam (dapat dipilih via kontrol) • Penggerindaan muka, plong, dalam, silinder • Chuck magnetik, chuck tiga rahang, collet, gerinda antara senter • Unit dress otomatis • Penopang stead • Resolusi: 0,0001 mm • Gerinda poligon • Unit penyeimbang statis • Batu gerinda tersedia dalam bahan korundum, berlian, dan CBN • Pengendalian siklus • Dapat diimpor melalui DXF