Beli Schaudt Mesin Penggiling Silinder - Universal bekas (79.076)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground Gedpfx Aevx Dvuop Debr - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP Paper band filter

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Gbodpsvq R Uzefx Ap Djr The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Gbjdpfjuxftxjx Ap Dsr Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Gjdpfxet Ii Rrj Ap Dsbr Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m Gboded Ih D Eepfx Ap Dsr As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Gbjdpevdk N Ejfx Ap Djr Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Gbjdpfx Asv I Eq Sop Dor Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Gedpjuxfucsfx Ap Debr Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Gsdpjuxfupjfx Ap Debr Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment Gedst Ii Nbjpfx Ap Debr - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Gjdpfjt Ii Nujx Ap Debr Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Gbodpfoxbh Ebjx Ap Dsr

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Gbedpfx Aeynmpgsp Djr Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A Karstens cylindrical grinding machine, originally from 1992 and completely overhauled and modernized in 2014, is available. Centre distance: 1000mm, centre height: 180mm, grinding diameter: 360mm, max. workpiece weight between centers/floating: 250kg/70kg, grinding wheel diameter: 400mm. Spindle taper: MK4, speed: 450rpm, swivel range: 90°, tailstock taper: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, feed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Includes 3 almost new centers and grinding wheels. Documentation available. Inspection on site possible. Gbodpfx Apov Suftj Dor

Kondisi: bekas, de-to-hu-it-lt-2024-06-13-01 Gsdpfxeyqv Uds Ap Dobr

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Gbsdpfx Apjywntye Der

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, tinggi pusat: 100 mm, lebar di tengah: 680 mm, panjang total: 620 mm, diameter penggilingan: 199 mm, en1 Gsdpjv Hqlrsfx Ap Dobr

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: belum diuji, Dudukan spindel benda kerja: MK5 Dudukan penumpu: MK3, hidrolik Tinggi antara ujung: 100 mm Jarak antara ujung: 650 mm Gbedpecwuluefx Ap Djr Panjang penggerindaan: 620 mm Roda gerinda: 500 x 80 x 203,2 Kondisi mesin: Mesin gerinda silindris CNC akan dibongkar sepenuhnya, dicat ulang, rel digerinda (termasuk revisi geometri), semua suku cadang yang aus dan spindel (sumbu X dan Z) diganti, serta semua unit dirakit ulang ke kondisi seperti baru. Sistem kontrol Marposs E-14 akan diganti dengan sistem SIEMENS ONE atau sistem FANUC. Pengujian mesin akan dilakukan sesuai dengan protokol TSCHUDIN. Aksesori mesin: - 1 buah sistem kontrol SIEMENS ONE atau sistem kontrol FANUC dengan fungsi Safety-Integrated - 1 buah perangkat kendali dengan roda tangan untuk pemosisian sumbu manual - 1 buah dudukan spindel benda kerja MK5 - 1 buah dudukan penumpu MK3, hidrolik - 1 buah sistem kontrol jarak - 1 buah flens roda gerinda - 1 buah pelindung penuh dengan pemantauan pintu - 1 set perkakas mesin dan dokumentasi Mesin tidak memiliki jam operasional dan telah direkondisi sepenuhnya dengan sistem SIEMENS ONE atau sistem FANUC yang baru.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle Gbjdpfx Aporz Nflo Dor - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: hampir baru (bekas), Tahun pembuatan: 2002, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Grinding diameter – max. 238 - 620 mm Grinding length 190 mm Workpiece length 380 - 940 mm Spindle speeds – infinitely variable 2 - 12,000 rpm Power requirement 380 kVA Drive power – grinding motor 1.1 kW Total power consumption 2.2 kW Machine weight approx. 0.6 t !!! We stock nearly all spare parts for Deckel S 11 machines !!! !!! Accessories can be configured as desired !!! We will gladly accept your used Deckel S 11 as a trade-in – contact us! DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 2189 400 V, 50 Hz, with CEE plug and cable Colour: Superstructure Pastel Turquoise RAL 6034 Base Blue Grey RAL 7031 Motorised height adjustment, axial grinding spindle adjustment Machine like new!! * Accessories: * Index head SK 40 with 24-position dividing plate * Dividing plate 20-position * Pull stud M16 69871 * Helical and relief grinding attachment with rack housing * Tailstock support with 4 tailstock centres * Centre with driver * Wheel dressing device * Diamond dresser * Radius grinding attachment SK 40 complete with setting gauge * Tool holder for above * Support finger with sliding blades * Support finger holder * Complete dust extraction (without extractor unit) * Halogen lamp * Tooth support complete * Setting gauge * Collet and ejection nut with key * 35 collets from 1.0 - 18.0 mm in 0.5 mm increments * 1 set direct clamping collets SK 40: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm Gjdpfxsw U Eg Rj Ap Dobr * 6-jaw grinding chuck * 3 taper reducing sleeves SK 40 x MK 1, 2, 3, 4 * Clamping nut * 20 grinding wheel arbors * 2 protective hoods * Assorted diamond/CBN grinding wheels * Operating manual, operating keys, spare parts list, circuit diagram * Complete set of grinding instructions The machine is partially overhauled and comes with electrical test protocol !! At extra cost, various measuring optics (new or used) with cross-slide can be supplied !!

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Grinding diameter – max. 238 – 620 mm Grinding length 190 mm Workpiece length 380 – 940 mm Spindle speeds – stepless 2 – 12,000 rpm Power input 380 kVA Drive power – grinding motor 1.1 kW Total power requirement 2.2 kW Machine weight approx. 0.6 t !!! We keep almost all spare parts for Deckel S 11 machines in stock !!! !!! Accessories can be selected as required !!! We are happy to take your used Deckel S 11 in part exchange – contact us! DECKEL S 11 TOOL GRINDING MACHINE – UNIVERSAL 400 V, 50 Hz, with CEE plug & cable Colour: Upper part pastel turquoise RAL 6034 Gedsw U Eh Iepfx Ap Dobr Base blue-grey RAL 7031 Motorised height adjustment, axial grinding spindle adjustment Machine as new!! * Accessories: * 1 pc. dividing head SK 40 with dividing disk 24 R * 1 pc. draw bolt M 16 69871 * 1 pc. dust extraction unit, complete without vacuum * 1 pc. halogen lamp * 1 pc. protective cover * Operating manual, operation keys, spare parts list, wiring diagram * Complete set of grinding instructions Machine is partially overhauled and supplied with electrical test report! !! Almost all accessories available at extra cost !!

Kondisi: bekas, Tahun pembuatan: 1984, 465-84 Gbodpfjw U Eg Dsx Ap Dor

Kondisi: baru, Tahun pembuatan: 2025, en-DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE Grinding diameter – max. 238 - 620 mm Grinding length: 190 mm Workpiece length: 380 - 940 mm Electrical power consumption: 380 kVA Grinding motor drive power: 1.1 kW Grinding spindle speeds: 2 - 10,000 rpm Total power requirement: 2.2 kW !!! We have almost all spare parts for Deckel S 11 machines in stock !!! * Machine and accessories reconditioned in 2025 with CE certification and 12 months warranty (domestic)! DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 400 V, 50 Hz, with CEE plug and cable Colour: 2K new paint finish Base RAL 7005 Mouse Grey Superstructure and accessories RAL 7035 Light Grey Motorized height adjustment, axial grinding spindle adjustment * Complete electrical retrofit includes: > Residual current circuit breaker > New three-phase drive > New brake motor > New frequency controller > New touch-safe installation wiring > EMC cable glands Gbjdpfxjw U Eh Us Ap Djr > EMC cabling > New protective conduits > Emergency stop switch > New control panel * Machine base milled and ground, new support plate Basic configuration: - incl. Waldmann LED lamp - incl. complete dust extraction system without vacuum unit - incl. protective hood for grinding wheels up to Ø 125 mm - incl. set of technical information - incl. 51 mm grinding wheel mount - incl. set of transport suspension devices - incl. 5 leveling screws Accessories: * Video measuring system with CCD camera and image processing software including new measuring cross slide new RSF scales on the measuring cross slide and on the machine axes (vertical and horizontal) (4 axes) incl. complete installation and calibration * Universal dividing head SK 40 with 24-position indexer and mounting points for optics * Operating key, manual, spare parts list, wiring diagram * Technical grinding instructions * Machine and accessories reconditioned and with electrical test report * 12 months warranty (domestic) We are happy to accept your used Deckel S 11 as trade-in – please contact us! !!! Accessories can be configured as required !!! Images show special accessories

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.760 mm, panjang total: 1.100 mm, lebar total: 850 mm, berat benda kerja (maks.): 12 kg, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 500 rpm, jenis arus masuk: tiga fasa, diameter roda gerinda: 125 mm, berat keseluruhan: 520 kg, panjang penggilingan: 190 mm, kecepatan rotasi (min.): 500 rpm, kecepatan rotasi (maks.): 10.000 rpm, tinggi pusat pada poros engkol: 220 mm, tinggi pusat: 330 mm, lubang collet: 25 mm, kecepatan spindle penggilingan: 10.000 rpm, laju pemakanan sumbu Z: 1 m/menit, rentang pivot: 360 °, jarak pergerakan sumbu X: 100 mm, jarak lintasan sumbu Y: 190 mm, jarak gerak sumbu Z: 325 mm, lebar di tengah: 620 mm, daya motor spindle penggiling: 1.100 W, panjang meja: 500 mm, lebar meja: 180 mm, tinggi meja: 1.020 mm, daya: 2 kW (2,72 hp), jenis penyesuaian ketinggian: listrik, diameter benda kerja (maks.): 620 mm, arus masuk: 20 A, diameter penggilingan: 130 mm, frekuensi input: 50 Hz, diameter cakram: 125 mm, tegangan masuk: 360 V, lebar yang dibutuhkan: 2.000 mm, persyaratan ruang panjang: 1.800 mm, kebutuhan tinggi: 1.800 mm, kecepatan roda gerinda: 10.000 rpm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, jarak meja ke pusat spindel: 325 mm, diameter alat: 400 mm, panjang benda kerja di antara senter: 270 mm, jarak antara pusat: 300 mm, tinggi pagar perataan: 190 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Grinding diameter – max. 238 – 620 mm Grinding length: 190 mm Workpiece length: 380 – 940 mm Power supply: 380 kVA Drive power – grinding motor: 1.1 kW Grinding spindle speeds: 2 – 10,000 rpm Total power requirement: 2.2 kW !!! We have almost all spare parts for Deckel S 11 machines in stock !!! !!! Accessories can be configured as desired !!! * Machine and accessories completely overhauled, CE marked and 12-month warranty (domestic)! We are happy to take your used Deckel S 11 in part exchange – contact us! !!! BASE MACHINE !!! DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 400 V, 50 Hz, with CEE plug and cable Overhaul year: 2025 Colour: 2K new paintwork Column RAL 7005 Mouse Grey Attachments and accessories RAL 7035 Light Grey Motorised height adjustment, axial grinding spindle adjustment * Complete electrical retrofit includes: > FI circuit breaker > New three-phase drive > New brake motor > New frequency control > New touch-safe built-in electrical components > EMC cable glands > EMC cables > New protective hoses > Emergency stop switch > New control panel * Machine stand milled + ground, new base plate Gbedpfxew U Ehhs Ap Djr * Column prepared for retrofitting with 4-axis measuring system Standard equipment: - incl. Waldmann LED lamp - incl. complete dust extraction without vacuum unit - incl. protective hood for grinding wheels up to Ø 125 mm - incl. set of technical documentation - incl. grinding wheel arbor 51 mm - incl. set of transport suspension devices - incl. 5 leveling screws * Operator’s key, operating manual, spare parts list, wiring diagram * Technical grinding instructions * CE documentation * Machine and accessories refurbished and supplied with electrical acceptance protocol

Kondisi: bekas, Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, diameter roda gerinda: 125 mm, berat keseluruhan: 520 kg, lubang collet: 25 mm, kecepatan spindle penggilingan: 500 rpm, daya: 1,1 kW (1,50 hp), arus masuk: 20 A, frekuensi input: 50 Hz, tahun perombakan terakhir: 2021, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Max. grinding diameter: 238 - 620 mm Grinding length: 190 mm Workpiece length: 380 - 940 mm Spindle speeds (stepless): 2 - 10,000 rpm Power supply: 380 kVA Grinding motor drive power: 1.1 kW Total power requirement: 2.2 kW Machine weight: approx. 0.6 t !!! We stock almost all spare parts for Deckel S 11 machines !!! !!! Accessories can be customized as required !!! We are happy to accept your used Deckel S 11 as a trade-in – please contact us! IMPORTANT: We are happy to provide you with a free offer. However, please understand that we can only process inquiries with complete address information. DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Frame Traffic Grey RAL 7042 (newly painted) Axial grinding spindle adjustment Accessories: * Machine stand and support plate ground * Complete electrical retrofit includes: > new three-phase drive > new brake motor > new frequency inverter > new touch-proof built-in electrics > FI circuit breaker > EMC cables and fittings > new protective conductors > new control panel > emergency stop switch * Opto-electronic measuring unit with microscope, support arm, storage station, new 2-axis Fagor digital display and complete scales assembled and calibrated * Dividing head SK 40 with alignment prisms and 24-notch indexing plate * Each 1 dividing plate 14 + 22 notches * Helix and relief grinding attachment with rack housing * Setting gauge * Complete tooth support * Swivelling support finger * Waldmann LED lamp * Dust extraction unit without vacuum * Universal setting gauge * 10 direct collets SK 40: 6/8/10/12/14/16/18/20/22/25 mm * Collet sleeve with ejector nut * 1 set = 35 collets S 20x2, from 1.0 - 18.0 mm in 0.5 mm increments * Each 1 taper reduction sleeve SK 40 x MK 1/2/3/4 * 3 grinding wheel holders L 48, 35 mm * Safety hood * Replacement grinding spindle * Tool cabinet with 4 drawers * Shelves for same * Operator keys, operating manual, spare parts list, circuit diagram * Machine and accessories completely overhauled and supplied with electrical test certificate! * 12 months warranty (domestic) Gjdpfsw U Ehzjx Ap Djbr