Beli Wmw Heckert Mesin Hobbing Gigi - Vertikal bekas (77.677)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Bedpfot Hw D Rjx Aquewn Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Bsdpfst Hwxbsx Aquswn Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Tahun pembuatan: 1984, Kondisi: siap digunakan (bekas), A vertical CNC gear hobbing machine from Pfauter is available. Module min./max.: 1/3, max. workpiece diameter: 150mm, max. face width: 150mm, milling head swivel: +/-45°, distance cutter axis to table axes: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, spindle speed: 600 rpm, feed rate: 1500mm/min, tangential travel: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. Inspection on site is possible. Bwsdpfx Aswkih Ejqusn

Tahun pembuatan: 1970, Kondisi: siap digunakan (bekas), Diameter roda: 160 mm, lebar roda maksimum: 355 mm, rentang modul: 0,5–4,5, diameter cutter maksimum: 115 mm, panjang cutter maksimum: 105 mm, rentang putar kepala frais: 120°, kecepatan putar: 400 rpm, jarak antara pusat: 410 mm. Dimensi mesin X/Y/Z: sekitar 2000 mm / 1500 mm / 2000 mm, berat: sekitar 3500 kg. Pemeriksaan di lokasi dimungkinkan. Bedjxph Skepfx Aquswn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, GP300 CNC Mesin Hobbing Gigi, PEMROSESAN BASAH & KERING sesuai pilihan. Kedua opsi tersedia. Siemens 840D Solution Line, sistem 5-sumbu, untuk benda kerja poros dan cakram. Maks. Ø300 mm, modul maks. 6, rentang putar ±45°, perjalanan aksial 440 mm, daya hobbing 15 kW, HSK-B80, meja Ø300 mm, penggerak langsung, kecepatan 90–900 rpm. Presisi tinggi, teknologi penggerak digital (Sinamics S120), posisi kepala otomatis 0,001°, pemandu linear, penarikan pengaman, kompensasi suhu, penutup penuh. Bwedpsxqn Tqsfx Aquon

Kondisi: sangat baik (bekas), mikron_a33_description_en Bjdpfox A D Izex Aquswn

Kondisi: siap digunakan (bekas), panjang ulir: 3.000 mm, Diameter spindle maksimum Ø 80 mm. Diameter maksimum dan minimum yang dapat dikerjakan sesuai jarak gerak adalah Ø 250 mm dan Ø 20 mm. Panjang pemesinan 3000 mm. Dengan aksesori: roda gigi pengganti, lunette. Data teknis lainnya dapat dilihat pada file PDF. Bsdpfx Aev Huihoqujwn

Kondisi: sangat baik (bekas), Max. wheel diameter: 1600 mm Min. wheel diameter: 800 mm Gear width: 560 mm Max. module: 16 Min. module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine equipped with change gears, arbors, and fixture set Bwjdov Igc Nepfx Aqujn Machine is in very good condition

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 12.000 kg, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 1.080 mm, diameter meja: 1.200 mm, kecepatan pemakanan sumbu X: 3 m/menit, laju pemakanan gandar Y: 500 m/menit, laju pemakanan sumbu Z: 3 m/menit, arus masuk: 195 A, diameter benda kerja (maks.): 1.600 mm, panjang spindle milling: 450 mm, mesin bor meja: 400 mm, kecepatan spindel (min.): 250 rpm, berat keseluruhan: 51.000 kg, daya: 115 kW (156,36 hp), Perlengkapan: dokumentasi / manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Liebherr LH90 V4 control, Bosch Rexroth drives Comprehensive accessories such as BHG, cooling unit for lubrication and coolant, extraction system, arbor mandrels, various software packages/limit value extensions, and complete documentation. Bwsdpfx Aewqm A Tjquen We can also provide support with installation and commissioning up to production on a time and material basis!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter meja: 430 mm, Harga untuk kedua mesin – hanya dijual sebagai satu paket. Merek: STAEHELY SH 500 Bjdpfxexfub De Aqujwn Aksesori: roda gigi pengganti, arbor, dan satu mesin dengan kepala frais tangensial (lihat foto)!!!!! Diameter meja = 430 mm Diameter roda gigi maks. = 500 mm Lebar roda gigi = 240 mm Modul = 6

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Profile Thread and Gear Hobbing Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over saddle: 250mm Maximum workpiece diameter over bed slideway: 500mm Spindle bore: 102mm Tailstock quill adjustment: 100mm Main motor: 4.0 kW Cross axis (x) feed motor: 4.3 kW Longitudinal axis (z) feed motor: 3.8 kW Electrical Equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for predefined machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard Accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle internal taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest tooth count for gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW For hobbing axis-parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4 Bwedpfx Aqjw Hquxouen • Heavy-duty thread milling attachment ApGS For hobbing axis-parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4

Kondisi: baik (bekas), Tahun pembuatan: 1987, jam operasional: 2.685 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 240 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, panjang total: 5.235 mm, tinggi total: 3.045 mm, lebar total: 3.990 mm, kecepatan spindel (maks.): 640 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 11.000 kg, Perlengkapan: dokumentasi / manual, Gear hobbing machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which underwent a general overhaul just a few years ago. Bwsdpfx Aqjw Dcx Rsusn Investments made: - Overhaul including milling head (2021): approx. €70,000 - All hydraulic hoses replaced (2021): approx. €3,500 - New oil mist separator (2021): approx. €5,000 Many tools and clamping devices available, see pictures and attachments.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3 kg, panjang pemakanan sumbu X: 100 mm, panjang umpan sumbu Y: 100 mm, panjang umpan sumbu Z: 200 mm, diameter benda kerja (maks.): 180 mm, panjang penggilingan: 200 mm, berat keseluruhan: 5.000 kg, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 400 rpm, diameter alat: 80 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-en Bwodpfxsx Af A Hj Aquen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, VEB Fritz Heckert ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Bsdpfx Aow Dvansqujwn Maximum workpiece diameter: 250 mm Accessories: Second milling head, various module hobbing cutters, steadies, clamping devices, etc.

Kondisi: bekas, Gear Hobbing Machine – Horizontal WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: Conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16; min.: 2 Bwsdpfjwxxxcsx Aqujn Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feed: 0.28 – 8 mm/min Radial feed: 0.1 – 2 mm/min Tangential feed: 0.16 – 4 mm/min Swiveling range of milling spindle slide (L/R): +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5 / 19.5 kW

Kondisi: baru, Eifco gear hobbing machines product range Bodsu Egdlspfx Aquswn

Kondisi: bekas, Tahun pembuatan: 1980, en-001 Bsdpfx Aou Ndf Isquown

Kondisi: bekas, translation_001 Bodpfew Th Nlox Aquown

Kondisi: bekas, en-001 Bedeu N Dz Aopfx Aquswn

Kondisi: bekas, Detail Teknis: Ketebalan material: 1,0 mm Lebar material: 17,0 mm Diameter dalam: 30,0 mm Diameter luar: 78,0 mm Bsdpeu N E Evefx Aquown Suku cadang untuk mesin bor meja BT 2 Pegas plat - pegas pengembali - pegas spiral Pernyataan konformitas sesuai ISO/IEC 17050-1 Sertifikat uji penerimaan 3.1 menurut DIN EN 10204 tersedia

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Longitudinal table travel: 1250 mm Table rotation: 360° Table positioning: 4x90° Longitudinal feeds: 0.63 – 2,000 mm/rev Total power requirement: 6 kW Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.82 x 2.25 x 0.92 m Conventional boring mill table * Bsdpsu N D Szjfx Aqujwn

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Table longitudinal travel: 1250/1400 mm Table rotation: 360° motorized Table positioning: 4x90° Feed rate – longitudinal: 0.63 - 2,000 mm/min Height above floor: 920 mm Voltage: 380 V Total power requirement: 6 kW Bwedpfxju N Ebdo Aqujn Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.8 x 2.25 x 0.95 m Conventional boring mill table, operated via control panel T-slots according to DIN 650: a = 28 mm; h = 49 mm; b = 52 mm; c = 21 mm

Kondisi: bekas, Technical details: Table diameter: 450 mm Table rotation - manual/mechanical: 360° Clamping table tilt: 90° mechanical degrees Approx. machine weight: 100 kg Dimensions: L: 800 x W: 700 x H: 400 mm Bwjdpfeu N D Aysx Aquen The surface of the rotary table is scraped. Very good condition! Micrometer-precise locking Positioning within the 0.01 mm range T-slots radial, according to DIN 650 Base mounting: 16 mm (6 holes)

Kondisi: baik (bekas), Tahun pembuatan: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Travel (x-y-z): 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping surface: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Bwedpofli Afofx Aquen Spindle taper: SK 50 Quill stroke: 80 mm Feeds, x and y-axis: 16 to 800 mm/min Feed, z-axis: 5 to 250 mm/min Connected load: 8 kW Accessories/Equipment: Tilting head; Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14023, jarak pergerakan sumbu X: 1.140 mm, jarak lintasan sumbu Y: 910 mm, jarak gerak sumbu Z: 875 mm, gerak cepat sumbu X: 60 m/menit, torsi: 1.000 Nm, produsen pengendali: Siemens, model controller: 840 D, kecepatan spindel (min.): 6.000 rpm, pasokan pendingin: 60 batang, jarak dari tengah meja ke hidung spindel: 240 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Siemens 840 D dengan koneksi jaringan SK50 DIN69871 – baut penarik DIN69872 6000 rpm, 2 tingkat transmisi, torsi maksimum 1000 Nm Perpindahan alat dengan rantai, 80 posisi Bwjdpfx Aqev Npm Hsuen 2 palet 800x800 mm, pola lubang M16 Tekanan tinggi pendingin melalui spindle 50 bar Filter pita kertas Knoll dan konveyor pengikis serbuk Tahun produksi: Des. 99 (maksimal operasi 1 shift)