Beli Bomag Rol Drum Tunggal bekas (16.393)

Kondisi: baru, Tahun pembuatan: 2024, 7305 Laedpfjwiry Iox Ac Hsf

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Stroke length (max.): 280 mm Installation height with bolster plate plunger/top: 355 mm Distance table/ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Through-hole in table: Ø 100 mm Ram speed (advance): 0.1 m/s Ram speed (return): 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor: 800 mm Total power requirement: 1.5 kW Machine weight approx.: 370 kg Dimensions approx. (LxWxH): 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded sheet steel). Operation is via foot switch. The press has been retrofitted: - Holder for film with punching device and automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot operation Ledpfxou Nfvbe Ac Hoaf

Kondisi: bekas, Technical details: Pressure: 2.5 t Outreach: 155 mm Maximum ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram approach speed: 0.08 m/s Ram return speed: 0.32 m/s Ram bore: Ø 20 x 45 mm Lodpfsu Nfv Uex Ac Heaf Height above floor: 930 mm Total power requirement: 1.1 kW Machine weight approx.: 500 kg Machine dimensions approx. LxWxH: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening work.

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Lsdpfx Acou Nfvuj Hsaf Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: bekas, Technical details: Laodpfx Aou Nfwljc Hsf Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Tahun pembuatan: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Through-hole in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Laodpfx Aow D Awmsc Hjf Machine weight approx.: 7,200 kg Machine dimensions approx. LxWxH: 2.1 x 1.4 x 3.4 m

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slide H-frame design ensures balanced distribution of the high loads generated during pressing, guaranteeing stable and repeatable operation. Model CHP 500 is engineered for long-lasting and reliable performance in heavy-duty production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty conditions. The frame and load-bearing components are stress-relieved through vibration. Bronze Zr14 slide bearings ensure smooth load distribution and long-term precision throughout the ram’s travel. Lajdpfsx N T H Asx Ac Hof ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - Welding applications approved for WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on-screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-slide H-frame press Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR & WPS certification accredited by TÜRK-AK according to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 5800 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Lodpox N T Rbsfx Ac Heaf Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Way Guided General Description The CRONOSSTECH CHP Series H-Type Hydraulic Deep Drawing Presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-way guided H-frame structure ensures maximum rigidity, stability, and precision under high tonnage loads. The CHP 1200 model delivers reliable and long-lasting performance for demanding industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even load distribution during pressing operations and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-way guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slideways - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Lsdpfx Asx N T Rusc Hsaf Type: Steel construction, 8-way guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based stress relieving Welding Application: WPQR and WPS certified welding, accredited by TÜRK-AK and compliant with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø560 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6100 mm Approximate Press Width: 3550 mm Approximate Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a robust steel construction. The 8-guide H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty use. The frame and supporting components are stress-relieved via vibration methods. The slide bearings use bronze Zr14 material, providing long-lasting and stable operation. Key Advantages - 8-guide H-frame structure - Stress-relieved steel construction via vibration - Welding procedures compliant with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved frame and support parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Dual-hand operator control system - Light curtain safety barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 600 mm Stress Relief: Vibratory stress relief Welding: EN ISO 15614-1/2017 certified by TÜRK-AK accreditation with WPQR and WPS approval (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Laodpfx Acjx N Tx Se Hof Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height Above Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 200 Ljdsx N T D Ujpfx Ac Heaf H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame body, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is engineered for applications requiring medium to high tonnage, with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and carrier components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth ram movement and long-term precision stability. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press body - Stress-relieved body and carrier parts via vibration - Bronze Zr14 slide bushings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically-controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration Welding Application: TÜRK-AK WPQR and WPS certified welding (with EN ISO 15614-1/2017 welding application certificate, supervised by certified welding coordinators according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Lasdjx N T Dzepfx Ac Hef Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 800 t, panjang langkah: 800 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures balanced distribution of high forces during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. Lodpfox N T Nkjx Ac Hoaf CHP Series – Structural Features CHP series presses are engineered with consideration for heavy industrial conditions. The frame and main structural components are stress-relieved using vibratory methods. Bronze Zr14 guide bearings ensure even load distribution and precision operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame via vibration - Bronze Zr14 guide bearings - WPQR & WPS approved welding in accordance with TÜRK-AK certified procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibratory stress relieving Welding Method: EN ISO 15614-1/2017 welding application certificate (approved by TÜRK-AK WPQR and WPS), supervised by certified welding coordination engineers per EN ISO 14731 Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Machine Height: 6000 mm Approx. Machine Width: 3350 mm Approx. Machine Depth: 2700 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.500 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.400 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, metal spinning, and heavy-duty forming applications requiring high tonnage. The 8-guided H-frame structure ensures maximum rigidity and stability during pressing, maintaining parallelism and perpendicularity tolerances consistently. The CHP 1500 model, with its large table dimensions, robust hydraulic system, and substantial stroke capacity, provides a reliable solution for the automotive, defense, heavy metal forming, and industrial manufacturing sectors. The frame structure is stress relieved via vibration to ensure long-term, stable operation. ⚙️ Standard Equipment • Steel construction, H-frame body design with 8 guides • Stress-relieved frame by vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • CE-compliant design and manufacturing • PLC-controlled hydraulic system • Touch panel screen (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter clogging warning system • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 • Type: Steel construction, 8-guided H-frame body • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 1500 Ton • Moving Table Dimensions: 1500 × 2400 mm • Fixed Table Dimensions: 1500 × 2400 mm • Parallelism Tolerance: 120 micron/m • Perpendicularity Tolerance: 60 micron/m • Stroke (Ram): 1000 mm • Min. Die Opening: 200 mm • Max. Die Opening: 1200 mm • Stress Relief: Vibratory stress relief • Welding Certification: TÜRK-AK-accredited WPQR and WPS, EN ISO 15614-1/2017 • Max. Working Pressure: 250 Bar • Total Motor Power: 90 kW – IE3 • Main Pump: 101 cm³ – REXROTH or PARKER • Rapid Approach Speed (Moving Table): 150 mm/s • Drawing Speed (Moving Table): 12 mm/s • Return Speed (Moving Table): 170 mm/s • Main Cylinder Bore: Ø620 mm – Ck45 (2 pcs) • Auxiliary Fast-Return Cylinders: 2 pcs • Approx. Machine Height: 6250 mm • Approx. Machine Width: 3750 mm Lasdpfx Asx N T R Uoc Hsf • Approx. Machine Depth: 2500 mm • Bottom Table Height from Floor: 1500 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touch Panel Screen: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 600 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description Lsdpfex N T Iaex Ac Hsaf The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines developed with high rigidity for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame construction ensures uniform distribution of the high forces generated during pressing, providing long-lasting and stable operation. The CHP 600 model is designed for reliable performance in production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 600 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Die Space: 100 mm Max. Die Space: 900 mm Weld Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 welding application certificate (supervised by welding coordination engineers certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø550 mm – Ck45 Pot Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Ruler: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: bekas, column-type hydraulic press EXNER Type EEX 20 S . 1615 Year of manufacture 1980 Pressing force 20 tons Throat depth 180 mm Table size 380 x 350 mm Table opening Ø 50 mm Ram area 310 x 250 mm Clamping pin Ø 35 mm Ram stroke 100 mm Max. installation height 250 mm Table height above floor 900 mm Downward speed approx. 480 mm/s Upward speed approx. 480 mm/s Working speed 20 mm/s Hydraulic tank capacity 110 liters Hydraulic operating pressure at 20 tons: 200 bar Motor power 4 kW Power supply 400 Volt, 50 Hz - Stroke initiation via two-hand control or light curtain - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU with single- and double-stroke and safety function - Rapid approach stroke and working stroke - Stroke limitation, pressure- or stroke-dependent - Mechanically adjustable fixed stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating instructions and electrical circuit diagram included - Stroke counter Required space (L x W x H) 1250 x 750 x 2000 mm Weight 1.4 tons Good condition Lajdpfx Acoyz Dtdo Hjf

Kondisi: bekas, Pressing force: 50 t Lodpfxswyplce Ac Hoaf Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid traverse down: 32 mm/s Working speed: 6.3 mm/s Rapid traverse up: 42 mm/s Power requirement: 4 kW Dimensions (LxWxH): 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard features Siemens S7-1200 control, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation Robotic automation with HORST robot optionally available on request.

Kondisi: baik (bekas), Tahun pembuatan: 1990, fi Lsdpfxjul Eawo Ac Heaf

Kondisi: baru, Pressure: 100Motor: 11Installation height: 500Stroke length (max.): 400Ram adjustment: 790 x 600Table height: Floor to top edge of table – 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmApproximate weight: 5,500 kgOil filling: 200 lType: Hydraulic C-frame pressCapacity: 100 tons at 230 bar Controls / Key switch modes: - Set-up mode – Manual, without light curtain - Automatic mode – Full speed with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 pcs, Ø 50 x 30 mm - Auxiliary guides: 2 pcs, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 l/min, Helical gear pump Speeds: - Advance: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) Lajdpfx Ajwrkctoc Hof - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components from REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Speed adjustable via PLC - Air cooler - Pre-fill valve - Pressure holding valve Control accessories: - Siemens S7-1200 control system - Main control cabinet - Safety PLC from SICK - Light curtains from SICK (700 mm) - Linear scale for stroke adjustment - 10" touchscreen from BEIJER (German & English) - Movable two-hand control - Ethernet connection for remote maintenance - Fault indicator with visual and audible signal - Dual work area lighting - Side safety doors (outward opening) - Hydraulic proportional valves - Dual-channel safety control - Operating manual & parts list (German) - Complies with current machinery directive EN 693 Oil quantity: 220 litres (tank volume: 250 litres) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 Light Grey & RAL 7016 Anthracite Grey

Kondisi: baru, Pressure: 40 Stroke: 500 Table surface: 700x500 Installation height: 600 Rapid traverse: 26 Working speed: 9 Motor: 4 Features: Two-stage hydraulic pump – compactly integrated into the machine frame Laedpfx Acswwx Are Hof Lever and push-button control – with secure two-hand operation Cylinder stroke: 500 mm – for versatile application possibilities Milled work table (lower) – robust and precisely finished Two working speeds – for fast yet precise operation Adjustable maximum pressure – can be individually adapted to the application Integrated pressure gauge – for precise monitoring of the operating pressure

Kondisi: baru, Pressure: 150Stroke: 500Table surface: 800x600Installation height: 630Rapid traverse: 22Working speed: 3Motor: 4Dimensions (LxWxH): 1800 x 1200 x 2400Approx. weight: 4500Equipment features: Lajdjwwx Afjpfx Ac Hjf Two-stage hydraulic pump – compactly integrated into the machine frame Lever and push-button control – with reliable two-hand operation Cylinder stroke: 500 mm – for versatile applications Milled worktable (lower) – robust and precisely machined Two working speeds – for both fast and precise work Adjustable maximum pressure – individually adaptable depending on the application Integrated pressure gauge – for precise monitoring of working pressure

Kondisi: baru, Pressure: 200 Stroke: 500 Table surface: 1000 x 600 mm Installation height: 640 mm Rapid traverse: 21 mm/s Working speed: 2 mm/s Motor: 5.5 kW Dimensions (LxWxH): 1800 x 1300 x 2500 mm Weight approx.: 6400 kg Ljdpfx Aowwx Aljc Hjaf Features: - Two-stage hydraulic pump – compactly integrated into the machine frame - Lever and push-button control – with secure two-hand operation - Cylinder stroke: 500 mm – for versatile applications - Milled work table (lower) – robust and precisely machined - Two working speeds – for fast yet precise operation - Adjustable maximum pressure – can be individually set depending on the application - Integrated manometer – for precise monitoring of working pressure

Kondisi: baru, Pressure: 70 kN Stroke: 500 mm Table surface: 700 x 500 mm Installation height: 600 mm Rapid traverse: 25 mm/s Working speed: 5 mm/s Motor: 4 kW Dimensions (LxWxH): 1400 x 900 x 2250 mm Approx. weight: 1900 kg Features: - Two-stage hydraulic pump – compactly integrated into the machine frame - Lever and push-button control – with safe two-hand operation - Cylinder stroke: 500 mm – for versatile applications - Milled work table (lower) – robust and precisely machined - Two working speeds – for both fast and precise operation Laodpfewwx Axsx Ac Hjf - Adjustable maximum pressure – can be customized for each application - Integrated manometer – for precise monitoring of working pressure

Kondisi: baru, Pressure: 100Stroke: 500Table surface: 800x600Installation height: 615Rapid traverse: 26Working speed: 4Motor: 4Dimensions (LxWxH): 1600 x 900 x 2300Weight approx.: 3100Features:Two-stage hydraulic pump – compactly integrated into the machine frame Laedewwxz Uspfx Ac Hsf Lever and button control – with safe two-hand operation Cylinder stroke: 500 mm – for versatile applications Milled work table (lower) – robust and precisely manufactured Two working speeds – for fast yet precise operation Adjustable maximum pressure – can be individually set depending on application Integrated pressure gauge – for precise monitoring of working pressure

Kondisi: baru, Pressure: 150 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 900 x 600 Ram surface: 900 x 600 Table height: 850 Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 Weight approx.: 8000 Oil filling: 400 Hydraulic C-Frame Press General information: Construction type: C-frame design, hydraulic Press force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Painting: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control system: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft start Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measurement system: Linear scale (500 mm) Touchscreen: 9“ Siemens, storage for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external integration (e.g. robot, coil line) Work area lighting (dual) Hydraulic system: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Laedpfowzzzfex Ac Hsf Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 ccm, 65 l/min – REXROTH Auxiliary pump: available Tank volume: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram safety lock (top dead center position) Pressure & speed adjustable via PLC Mechanical data: Mounting height: 500 mm (distance ram – table plate) Stroke length: 400 mm Mounting depth: 650 mm Throat: 350 mm Table height: 850 mm (floor to top of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & electronics: Main control cabinet Pressure & speed setting via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Screen: 9“ Siemens touchscreen Remote maintenance via Secomea module Safety & operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding backwards) Operating manual & parts list (German), including maintenance schedule