Beli Cronosstech Chp 600 bekas (12.363)

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, lebar meja: 600 mm, panjang meja: 800 mm, tinggi meja: 850 mm, lubang tembus di meja: 190 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 100 mm, Perlengkapan: penghadang cahaya keselamatan, D TYPE ECCENTRIC PRESSES – GENERAL FEATURES • Steel construction body • Stress relieving by vibration for the body and welded parts • Table parallelism and perpendicularity tolerances comply with ISO and DIN standards • Pneumatic clutch and brake combination – OMPI, Italy • Ram supported by 8 guides • Ram with cushion cylinder • Parts such as ram, connecting rod, and slide block made of GS52 steel casting • High strength monoblock crankshaft – 4140 • Bronze bushing in connecting rod (Zr14) • Rear flywheel • Supplied with spare table • Hydraulic overload protection • Motorized table-to-ram adjustment • Automatic central lubrication • Pneumatic pedal with latch and dual-hand control with timer • Electric counter • PLC application and touchscreen – DELTA • Electrical switchgear by SIEMENS and SCHNEIDER • CE conformity – OPTIONAL • Finger protection light barriers – SICK, LEUZE • Safety PLC (monitors all electric systems, valves, two-hand and pedal) – PILZ • Dual-coil safety valve – GPA, TOPAIR • Position-locked limit switch and control panel • Safety block • Protective safety guards in compliance with CE directives MODEL D TYPE MONOBLOCK FRAME Capacity 80 Ton Distance Between Table and Ram 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Bore Diameter 190 mm Fedpsvxhb Uefx Anlopl Table Size 600 / 800 mm Die Clamping Bore Diameter 40 mm Ram Dimensions 245 / 410 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 RPM Approx. Weight 6,500 kg

Kondisi: baru, Tahun pembuatan: 2025, MAXIMUM CAPACITY: Ø51x3 mm MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190 DEGREES WORKING LENGTH: 3000 mm MOTOR POWER: 13.5 kW BENDING SPEED: VARIABLE STANDARD FEATURES One set of bending dies in customer-specified dimensions Servo Motor Driven Feeding Axis Servo Motor Driven Rotation Axis Automatic Emailing of Detailed Operation Reports Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) Mobile 21” Color Screen CNC Control Unit 3D Bending Simulation Display of Daily, Weekly and Monthly Total Production Quantities Calculation of Total Material Length to be Used Estimation of Bending Operation Time Conversion of X-Y-Z Data to Y-B-C Remote Assistance Portable Foot Pedal with Emergency Stop Manual – Automatic Bending Mandrel – Non-Mandrel Bending Safety Switch Guard Plate Behind Bending Head Automatic Mandrel Lubrication System (SFB 38 CNC/R1) Hydraulic Clamping Hydraulic Mandrel Hydraulic Stopper Fsdsvyzwrjpfx Anlopl Hydraulic Oil Cooler Hydraulic Linear Slider System Hydraulic Chuck Electrical Panel Safety Lock and Keyed Enclosure Lock Electrical Panel Cooler Overload Protection

Kondisi: baru, Tahun pembuatan: 2025, Diameter pipa (maks.): 60 mm, radius pembengkokan (maks.): 200 mm, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 60 x 3 mm Fpodovn Euqopfx Anlel Easy one-touch control allows any operator to program and automatically save the bending angle Single bending speed Start the bending cycle from the control panel or the integrated foot pedal Designed on a portable, wheeled cabinet with handles for easy transport.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penarikan balik: 70 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guide Rail General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to provide controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guide-rail H-frame structure ensures maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are consistently maintained during the stroke. The CHSP 200/70 model, with a 200-ton main ram and 70-ton cushion (pot) capacity, is designed for medium to high-tonnage deep drawing and forming operations. The frame construction is stress relieved through vibration to ensure long-lasting and reliable performance. ⚙️ Standard Equipment Fjdpfx Ajx N T U Tenlopl - Steel construction, H-frame press body with 8 guide rails - Stress-relieved frame structure (by vibration) - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 - Type: Steel construction, H-frame with 8 guide rails - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 200 Ton - Capacity (Cushion/Pot): 70 Ton - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 800 mm - Cushion Stroke: 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Frame Stress Relief: By vibration - Welding Application: WPQR and WPS certified by TÜRK-AK, accredited to EN ISO 15614-1/2017; Welding processes are supervised by certified “welding coordination engineers” in accordance with EN ISO 14731 - Max. Operating Pressure: 250 Bar - Total Motor Power: 22 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø320 mm – Ck45 - Cushion Cylinder Bore: Ø190 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 3800 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 13.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 80 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operation principle to ensure precise material flow control during sheet metal forming, deep drawing, and spinning applications. Its 8-guide H-frame construction provides maximum rigidity during the pressing process, maintaining stable parallelism and perpendicularity tolerances throughout the stroke. The CHSP 250/80 model, with a 250-ton main ram and an 80-ton cushion ram (blankholder) capacity, is designed for medium-to-high tonnage deep drawing and spinning operations. The frame is stress-relieved by vibration to ensure durable and reliable performance. ⚙️ Standard Equipment - Steel construction H-frame body with 8 guides - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Real-time oil temperature and system status monitoring from display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 250/80 - Type: Steel construction, H-frame with 8 guides - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 250 Ton - Capacity (Cushion): 80 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/m - Perpendicularity Tolerance: 60 microns/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Die Opening: 100 mm - Max. Die Opening: 900 mm - Stress Relief: Vibration stress-relieving Fedpfjx N Uaqsx Anlspl - Welding Application: WPQR and WPS certified, accredited by TÜRK-AK EN ISO 15614-1:2017 (Welding applications are supervised by certified “welding coordination engineers” per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Rapid Descent Speed (Moving Table): 150 mm/sec - Spinning Speed (Moving Table): 12 mm/sec - Return Speed (Moving Table): 170 mm/sec - Cushion Advance Speed: 30 mm/sec - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 100 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operational principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the entire stroke. The CHSP 300/100 model, with a 300-ton main ram and a 100-ton blankholder (pot) capacity, is designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved via vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 guideway bearings - Welding applications approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” touch panel display (DELTA) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Tons - Capacity (Pot): 100 Tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm Fsdpfx Asx N Uhbjnlopl - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Pot): 300 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 900 mm - Weld Stress Relief: Vibratory stress relieving - Welding Application: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017; applications audited by certified "welding coordination engineers" in accordance with EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Pot Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Pot Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4400 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 175 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-gib H-frame structure, maximum rigidity is achieved during the pressing operation, and the parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton blankholder ram (cushion) capacity, is designed to provide full control over the die and workpiece in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration, ensuring long life and dependable operation. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press design - Stress-relieved frame structure by vibration - Bronze Zr14 gib guides - Welding applications approved with WPQR and WPS certificates accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning Fjdpfx Aox N Uhusnlopl - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-gib H-frame press design Frame Material: St52 – ERDEMİR Gib Guides: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Die Space: 100 mm Max. Die Space: 1100 mm Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS certified, TÜRK-AK accredited, EN ISO 15614-1/2017 (Welding applications supervised by "welding coordination engineers" certified under EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Cushion Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 800 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, gaya penarikan balik: 270 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, en Fodpfx Anox N Uh Uslopl

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.500 t, panjang langkah: 1.000 mm, lebar meja: 1.800 mm, panjang meja: 2.600 mm, gaya penarikan balik: 800 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guide Slides General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are designed for heavy-duty deep drawing applications that require extremely high tonnage, large table dimensions, and precise blank holder force. The 8-guide slide H press body ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over the entire long stroke length during ram and table movements. The CHSP 2500/800 model provides maximum stability, controlled material flow, and repeatable production performance in large and deep drawing dies, thanks to its 2500-ton main ram and 800-ton blank holder capacity. The steel frame, stress-relieved by vibration, is engineered for long-lasting and reliable operation in heavy industrial environments. ⚙️ Standard Equipment • Steel frame, H-type press body with 8 guide slides • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • Welding applications with TÜRK-AK accredited WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel frame, H-type press body with 8 guide slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Ton Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min/Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Fedpfxex N Uk As Anlspl Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approx. Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, panjang langkah: 500 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 30 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 80/30 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 80/30 ton column type hydraulic deep drawing press is an industrial press solution with a four-column rigid frame, specifically engineered for high-precision metal deep drawing, forming, and die testing applications. Its St52 grade steel construction is stress-relieved by vibration technique, ensuring high parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and cushion systems operate independently, with precise stroke and pressure adjustments available via the operator panel. Featuring hydraulic components from REXROTH or PARKER, an IE3 class motor, and PLC control, this model ensures long service life, safety, and energy-efficient operation. Automatic lubrication and contamination alerts for filters minimize maintenance requirements. This machine is ideal for small to medium series production, die testing, and precision forming tasks. Key Advantages - Four-column rigid press frame design - Independent stroke and tonnage adjustments for ram and cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance costs, long service life Areas of Application - Metal deep drawing applications - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/m Fjdpfxex N Ultj Anlopl PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s CUSHION FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 200 mm – Ck45 CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm BED HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (adjustable via touch panel) RAM / CUSHION STROKE & TONNAGE SETTING: Adjustable via touch panel SYSTEM & PRESS STATUS INFORMATION: Viewable via touch screen DIE MEMORY: Adjustable via touch panel LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: listrik, jumlah rol: 3, diameter roller (bawah): 190 mm, diameter rol atas: 190 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, daya: 4 kW (5,44 hp), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty jobs. It is particularly suitable for rolling materials up to 10 mm in thickness. Common applications include working with aluminum materials, manufacturing ventilation ducts, advertising panels, machine bodywork and sheet metal components, among many other similar tasks. All models are driven by planetary gearbox High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable upper roll Movable control panel Cone bending roll Fedpsx D Dfvofx Anljpl Centralized lubrication system Precise bending capability with braked motor and planetary gearbox Motorized rear roll with vertical up/down movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) Operating manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for fitting profile and pipe bending rolls Profile and pipe bending roll set Motorized bottom roll with vertical movement Delrin-sleeved upper roll for Alucobond bending Adjustable speed in steps NC Control TECHNICAL SPECIFICATIONS Bending Length : 2550MM Pre-bending : 4/5MM Bending Capacity : 5/6MM Upper & Lower Roll Diameter : 190MM Min. Bending Diameter : 285MM Main Motor Power : 4 KW Rear Motor Power : 1.5 KW Length : 4700MM Width : 950MM Height : 1300MM Weight : 3400KG

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, tinggi meja: 955 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 320 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) Fodpfox Nn Eaox Anlepl • LED lighting Optional Features • Rear gauge expansion from X+R to 4-6-8 axis options • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel die • Rear gauge X-axis up to 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge supports TECHNICAL SPECIFICATION VALUE Bending Force (Tons) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Lower-Upper Jaw Gap) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (L) 290 Machine Weight (kg) 14700 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, lebar kerja: 3.100 mm, sudut pemotongan (min.): 0,5 °, sudut pemotongan (maks.): 3 °, laju langkah (min.): 13 rpm, ketebalan lembaran (maks.): 10 mm, ketebalan pelat baja (maks.): 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade gap, stroke, and blade angle adjustment • 1,000 mm NC controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retraction movement • Backgauge lift-up function for parts longer than 1,000 mm • Adjustable cutting length from the control panel for increased cycle rates during short cuts • Ball transfer sheet support table • 2 cutting edges on upper blade / 4 cutting edges on lower blade • Special joint system reducing maintenance requirements • 1,000 mm front support arms with ruler, T-slot, and stopper • Front and side safety guards • Cutting line illumination and shadow wire Fpodpfxjx Npdde Anlel • 1,000 mm openable front finger safety guard • Foot pedal • Movable control arm and safety cabinet • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front feeding (Type 2) • Adjustable angle gauge 0-180º • Front support arms in custom lengths • Special 500 mm throat depth • Full-length openable front finger safety cover • Front finger safety light curtain • Special blades • Laser cutting line • Oil heater or cooler • Automatic or manual central lubrication • Electrical cabinet with climate control • CNC front support sheet feed arms • CE-compliant rear light barrier • Lightweight safety guards TECHNICAL SPECIFICATION VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / High Speed Mode 7 / 13 cpm (cycles per minute) Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Ton

Kondisi: baru, Tahun pembuatan: 2025, daya: 18,5 kW (25,15 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 140 mm/dtk, tinggi meja: 965 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 220 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, STANDARD FEATURES CNC-controlled hydraulic press brake. CNC-controlled Y1 – Y2 – X – R axes (4 axes). CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display). Offline PC programming capability. Stress-relieved, heavy-duty steel frame. CNC-controlled synchronized cylinder system. 310 mm stroke. 410 mm throat depth. ±0.03 mm precision, servo-motor rear gauge. Rear gauge travel distances: X axis: 750 mm R axis: 250 mm Ball screw and linear guide rear gauge system. Sliding-type front support arms. Manual crowning system (wedge type). European style narrow lower table. European style quick-release upper tool clamping system (Promecam type). High-precision linear scales. Standard upper punch (H: 67 mm – 85° – R: 0.8). Standard lower die (60×60 mm – 4 V-channels: 16 / 22 / 35 / 50 mm). Front laser safety system. LED lighting. Foot pedal. Emergency stop buttons. CE-compliant safety equipment. OPTIONAL FEATURES 4 / 6 / 8-axis rear gauge systems starting from X + R. Extension of rear gauge X-axis stroke up to 1000 mm. Additional rear gauge fingers. Hydraulic upper and lower tool clamping systems. Motorized crowning system. Wider lower table for multi-channel dies. Front safety laser system (AKAS or DSP). Rear safety light barrier. CNC-controlled sheet front support systems. Automatic angle measuring system. Oil cooler or heater. Air-conditioned cooling system for electrical cabinet. Deep throat option. TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons. Bending length: 4100 mm. Distance between side frames: 3600 mm. Stroke: 310 mm. Daylight opening: 515 mm. Throat depth: 410 mm. Table height: 965 mm. Rear gauge axes: X = 750 mm / R = 250 mm. Fpjdpfxsx Nqqro Anlel Approach speed: 180 mm/s. Working speed: 140 mm/s. Return speed: 10 mm/s. Main motor power: 18.5 kW. Oil tank capacity: 290 liters. Machine weight: approx. 13,650 kg. Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 200 mm, lebar meja: 1.100 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety even with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production environments. Key Advantages - Stable operation with large dies due to 2000×1100 mm table size - Die/equipment protection with hydraulic overload safety device - 8-point guided ram + counterbalance piston for precise guidance - Controlled, user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application Areas - Punching/cutting/forming operations requiring large table sizes - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel body construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided slide Fedox N Rwrspfx Anlepl • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Reverse motion motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press powered by force transmitted through an eccentric mechanism, used in cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, owing to their rigid frame construction. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it offers dependable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety Fsdpjx N R Ahofx Anljpl - Precise guidance provided by 8-point guided ram + balancer piston - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety through light curtain protection Applications - Punching/cutting/forming processes requiring large tables - Mass production with automated feeding lines - Heavy die and high tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with a single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover at the front of the table • Dies manufactured to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 800 mm, jarak antara tiang: 800 mm, gaya penarikan balik: 40 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 100/40 TON COLUMN-TYPE HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 100/40 ton column-type hydraulic drawing press is an industrial press solution with a rigid four-column body, specifically engineered for metal forming, deep drawing, and precision pressing applications. The frame is constructed from St52 grade steel and undergoes stress-relief treatment via vibration. This structural design ensures high parallelism and perpendicularity tolerances are maintained over time. The ram and blank holder systems operate independently; stroke and pressure adjustments can be controlled precisely via a touch screen panel. REXROTH or PARKER hydraulic components, IE3-class motors, and PLC-controlled system architecture provide high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements to the lowest possible level. This model offers an ideal solution for medium-scale serial production, die testing, and precision forming applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touch screen panel - High precision and repeatability - Low maintenance cost, long lifespan Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELD STRESS RELIEF: Vibration stress-relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/s MOVING TABLE PRESSING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / BLANK HOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Ton Fpodpfex N Ulyex Anlel Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: mekanis, lebar kerja: 3.060 mm, sudut pemotongan (min.): 1,3 °, laju langkah (min.): 41 rpm, ketebalan lembaran (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, penyesuaian pengukur belakang: digerakkan oleh motor, penahan belakang: 750 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, Standard Features ELGO P40T CNC control unit Fjdpfxjyg Ic Ej Anlspl Robust, welded, and monolithic frame structure ensuring maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade with 2 cutting edges, lower blade with 4 cutting edges, manufactured from high alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance adjustment mechanism Ball transfer front table Front support arms with scale ruler Cutting line illumination system Finger guard system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system to facilitate moving and positioning sheets to the rear System to allow the cut piece to drop to the front Adjustable angle square at the front, 0–180° Front support arms in desired lengths Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: mekanis, lebar kerja: 2.060 mm, sudut pemotongan (min.): 1,3 °, laju langkah (min.): 41 rpm, ketebalan lembaran (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, penyesuaian pengukur belakang: digerakkan oleh motor, penahan belakang: 750 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perlindungan jari, Standard Features ELGO P40T CNC control unit Robust, welded monolithic frame construction for maximum cutting precision NC-controlled, motorized 750 mm backgauge system Top blade with 2 cutting edges, bottom blade with 4 cutting edges, manufactured from high alloy steel Mechanical hold-down device to prevent sheet slippage during cutting Easily adjustable blade gap setting mechanism Ball transfer front table Front support arms with scale and stops Cutting line illumination system Finger guard safety system Foot pedal Rear safety cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sliding system for convenient sheet handling and transfer to the rear System to allow cut pieces to drop to the front Front angle gauge adjustable 0–180° Fpedoyg Id Aspfx Anlol Front support arms available in custom lengths Manual 750 mm backgauge, frontrally adjustable with handwheel Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2600 × 2250 × 1400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.500 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.400 mm, gaya penarikan balik: 500 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long service life in deep drawing applications requiring ultra-high tonnage and large bolster areas. Thanks to its 8-guided H-frame body design, both slide and bolster movements are highly controlled and stable throughout the pressing process. The CHSP 1500/500 model, with a main ram capacity of 1500 tons and cushion capacity of 500 tons, is specifically developed for large-dimension dies, deep drawing, and controlled forming operations. The frame is fabricated from vibration stress-relieved steel construction to ensure high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • 8-guided slideway H-frame steel construction • Vibration stress-relieved body structure • Bronze Zr14 slideway bearings • WPQR and WPS certified welding processes with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • Hydraulic oil temperature and system status monitoring on-screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection Fedpfx Aox N Ukijnljpl 📐 Technical Specifications – CHSP 1500/500 Type: 8-slided H-frame steel construction Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/m. Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 pcs) Cushion Cylinder: Ø360 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 60 t, panjang langkah: 400 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 20 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS General Description The CRONOSSTECH 60/20 ton column-type hydraulic spinning press is a rigid and compact press solution designed for precision metal forming, deep drawing, and spinning applications. Its four-column construction ensures stable maintenance of parallelism and perpendicularity tolerances throughout the pressing operation. The frame, manufactured from St52 grade steel, undergoes stress relief by vibration. Ram and pot systems can be controlled independently; stroke and pressure settings are precisely configured via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and an automatic lubrication system, this press ensures long service life, safety, and efficient operation. PLC-controlled architecture minimizes operator errors. This model provides an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid, four-column press frame construction - Independent stroke and tonnage control for ram and pot - Settings adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, long service life Fpsdpfxjx N Ulgj Anlol Fields of Application - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened, hard chrome-plated shafts SLIDE BEARING: Bronze Zr14 RAM CAPACITY: 60 ton POT CAPACITY: 20 ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 400 mm POT STROKE: 100 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 500 mm WELD STRESS RELIEF: Vibratory stress relief WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 POT CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN CHARGING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via panel) RAM / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via panel SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 ton Note on Production This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 280 mm, diameter rol atas: 280 mm, diameter roll samping: 220 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT Fpsdpfx Aew Smfcjnljl * The bottom and side rolls perform linear up-and-down movements via pistons hydraulically connected to the frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gear reducers (all 3 rolls driven by motors) * The positions of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow for easy removal of the bent workpiece * Easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for the parallel movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system Fpjdpfx Anoxbzptelol * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, Diameter pipa (maks.): 65 mm, Panjang pipa (maks.): 3.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 250 mm, jumlah sumbu: 5, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, STANDARD EQUIPMENT Fpsdpfxoxircgj Anljl • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motor-Driven Feeding Axis • Servo Motor-Driven Rotational Axis • Servo Motor-Driven Bending Axis • Servo Motor-Driven H, V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of workpiece length • Calculation of estimated bending time • Conversion of X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop Function • Remote assistance • Bending with and without mandrel • Safety plate behind the bending head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slide System • Hydraulic Clamping Chuck • Electrical Cabinet Safety Lock and Lockable Cabinet Key • Electrical System Cooler • Overload protection • Automatic detailed work report submission OPTIONAL EQUIPMENT (Not included in the price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Extra mandrel length (up to 6 m) – per meter • Ball mandrel and wiping die • Automatic mandrel lubrication system (for suitable pipe diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum Capacity mm Ø65x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotational Tolerances Switchable Bending Power kw 22.5 LxWxH mm 6350x1400x1600 Weight kg 3950

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 200 t, panjang langkah: 60 mm, lebar meja: 400 mm, panjang meja: 4.200 mm, penyesuaian langkah: 60 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, 650e024b Fpodsxrbmyopfx Anlol