Beli Ivt Grahics Pengering Ir 28” Offset bekas (9.212)

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 364080, saluran warna: 2, lebar kertas (maks.): 1.000 mm, tinggi kertas (maks.): 700 mm, pembacaan penghitung (hitam): 345.000.000, pembacaan penghitung (warna): 345.000.000, jenis arus masuk: tiga fasa, Mesin cetak offset KBA Rapida 105, dilengkapi dengan unit pembalik cetak (perfector) dan dikonfigurasi khusus untuk mencetak pada kertas tipis. Harga: 99.500 EUR FCA Tahun pembuatan: 2002 Jumlah cetakan: 345 juta Nwodpjznuyxsfx Af Roi Ukuran: 1000 × 700 mm Warna: 2+0 atau 1+1 Unit pembalik cetak (perfector): Ya Perlengkapan: Cocok untuk pencetakan kertas tipis Ketersediaan: Agustus 2026

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Dijual 6 unit mesin. Kami terbuka untuk penawaran harga tetap per unit. Pemeriksaan diperbolehkan. Nwsdpfozpzqyox Af Rji

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the air flow. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and durability. Key design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the incoming air passes through a heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. The use of countercurrent flow allows for effective heat recovery, enhancing the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is cooled to a dew point of 3°C. This results in the condensation of water vapor and oil particles contained in the air. 3. Condensate separator After cooling, the air/gas and condensate mixture enters a high-efficiency separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of the cooling intensity to actual demand, which reduces energy consumption and extends component life. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3800 l/min Nwsdpfemt Dcqex Af Rji Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 59 kg Type and quantity of refrigerant: R410a, 650 g

Tahun pembuatan: 2026, Kondisi: baru, The refrigerated compressed air dryer is designed to reduce the temperature of compressed air and remove water and oil particles contained in the air stream. Refrigerated air dryers are essential in applications where moist air can cause corrosion, contamination, or damage to tools, machinery, or products. By eliminating moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and longevity. Key construction elements include: 1. Air-to-air heat exchanger In the first stage of the process, inlet air passes through a heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. The use of counterflow heat recovery improves the overall system's energy efficiency. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This results in condensation of water vapors and oil particles contained in the air. 3. Condensate separator After cooling, the air-condensate mixture enters an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system Nwodpfxjmt Dcfs Af Rji Variable-speed fan technology allows intelligent adaptation of cooling power to actual demand, reducing energy consumption and increasing component lifespan. Technical Specifications Inlet/outlet pipe diameter (BSP): 1" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2,800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Refrigerant type and quantity: R134a, 550 g

Tahun pembuatan: 2026, Kondisi: baru, The refrigeration compressed air dryer is designed to reduce the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigeration dryer is engineered for maximum efficiency and durability. The main design components include: 1. Air-to-Air Heat Exchanger In the first stage of the process, the inlet air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Through the use of counterflow, heat recovery increases the system’s overall energy efficiency. 2. Refrigeration System Evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to the dew point temperature of 3°C. This results in the condensation of the water vapor and oil particles present in the air. 3. Condensate Separator After cooling, the gas and condensate mixture enters an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan Operation Control System The variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and extending component service life. Technical Specifications Nwodomt Dbhspfx Af Roi Inlet/Outlet Pipe Diameter (BSP): 1" Maximum Working Pressure: 10 bar Maximum Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply Voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Type and Quantity of Refrigerant: R134a, 400 g The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to explore our offer on our website.

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1000 rotary screw compressor with inverter, vertical compressed air tank with accessories (capacity 270 L), and IZBERG N10S dryer. The LUFT series rotary screw compressor by the Polish brand CORMAK features state-of-the-art solutions in pneumatics, utilizing high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Nwjdpfx Afsxazlrs Roi LUFT 1000 INVERTER Technical Specifications: - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Air delivery 0–6 bar: 990 L/min - Air delivery at 6 bar: 950 L/min - Air delivery at 8 bar: 950 L/min - Air delivery at 10 bar: 930 L/min - Outlet connection diameter (G): 1/2'' - Dimensions: 810 x 610 x 850 mm - Weight: 160 kg IZBERG N10S Air Dryer Technical Specifications: - Inlet/outlet pipe diameter (BSP): 1'' - Max operating pressure: 10 bar - Max inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type and quantity: R134a, 400 g CORMAK vertical air receiver, 270 L, 11 bar working pressure – a reliable solution for compressed air storage in industrial facilities, workshops, and pneumatic installations. The robust steel construction, full compliance with EU directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the receiver can function as both a storage buffer and a stabilizing element for compressor operation. Key advantages of the CORMAK 270 L air receiver: - Professional pressure vessel design – manufactured from premium-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - 11 bar working pressure – suitable for most pneumatic systems, including those with increased demands. - High capacity – 270 liters – ensures stable supply to pneumatic installations and reduces compressor start frequency. - Multi-connection system – five connection points in 1.1/4'', 2'', and 1/2'' diameters enable flexible integration with different setups. - High quality finish – durable anti-corrosive coating inside and outside the tank. - Universal installation position – vertical design allows space-saving installation in your facility.

Kondisi: baru, Tahun pembuatan: 2026, Screw compressor THEOR 20 with integrated refrigeration compressed air dryer. The CORMAK THEOR series screw compressor, manufactured by the Polish brand CORMAK, represents state-of-the-art solutions in pneumatics, combining the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and trouble-free operation in all conditions. Integrated refrigeration dryer: The COMPACT version with an integrated dryer provides space-saving and an all-in-one solution. The built-in refrigeration dryer ensures dry and clean air, protecting your air system from corrosion and damage. Quiet operation & comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Effective sound damping and vibration reduction systems ensure a comfortable working environment, resulting in better focus and well-being for operators. Intelligent control: The intuitive MAM series electronic control panel is the command center of your compressor. It allows precise monitoring of parameters, scheduling maintenance, and quick diagnostics, ensuring stability and protection of key components. Adaptability: We understand every application is unique. CORMAK compressors can be configured with additional air treatment systems for perfect adaptation to the specific requirements of your sector. Dynamic working pressure: Automatic pressure regulation ensures the compressor delivers exactly the required amount of compressed air at any given time, maximizing energy efficiency and minimizing losses. Sustainable development: We focus on eco-friendly solutions. The energy-saving technologies used in our compressors not only lower your utility costs but also reduce environmental impact, and the optional heat recovery enables maximum energy utilization. Technical specifications Motor power: 15 kW Voltage: 400V/50Hz Capacity 0-6 bar: 2100 L/min Capacity at 6 bar: 2000 L/min Capacity at 8 bar: 1700 L/min Capacity at 10 bar: 1600 L/min Outlet port diameter (G): G1" Dimensions: 1550 x 740 x 1180 mm Nodpfx Afjy Rpmnj Rowi Weight: 500 kg

Kondisi: baru, Tahun pembuatan: 2026, LUFT 1000 COMPACT Screw Compressor with integrated refrigerated compressed air dryer. The CORMAK LUFT series rotary screw compressor, manufactured in Poland, features the latest advancements in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, and high device efficiency ensure reliable and trouble-free performance. Innovative design: Our compressors are built on advanced engineering and European precision craftsmanship. The sturdy construction, enhanced with modern components, guarantees long-lasting, trouble-free operation in any working conditions. Integrated refrigerated dryer: The COMPACT version incorporates a space-saving, all-in-one solution. The built-in refrigerated dryer ensures dry, clean air, protecting your system against corrosion and damage. Silent operation & comfort: Designed with attention to detail, our compressors stand out for their exceptionally low noise levels. Effective soundproofing systems and vibration reduction provide a comfortable work environment, enhancing operator concentration and well-being. Intelligent control: The intuitive MAM electronic control panel serves as your compressor’s command center. It enables precise monitoring of parameters, maintenance scheduling, and rapid diagnostics, ensuring stability and protection of key components. Adaptable to your needs: We understand every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect match to the specific requirements of your sector. Dynamic working pressure: Automatic pressure adjustment ensures the compressor supplies exactly the needed amount of compressed air, maximizing energy efficiency and minimizing losses. Sustainability: We prioritize environmentally friendly solutions. The energy-saving technologies in our compressors reduce your costs and environmental impact, and the optional heat recovery system optimizes energy use. Integrated Refrigerated Dryer – Top-tier Air Quality Two-stage drying system: Ensures effective moisture removal and protects the pneumatic installation. Nsdpfxsxmg A As Af Rswi Variable speed fan: Automatically adjusts cooling performance to suit working conditions, saving energy. Dual filtration system: Pre-filter with 3.0 µm precision removes larger solid contaminants; the fine filter with 0.1 µm accuracy traps oil aerosols and fine particulates, guaranteeing the highest level of air purity. Technical specifications: Motor power: 7.5 kW Voltage: 400V/50Hz Free Air Delivery at 0-6 bar: 990 L/min F.A.D. at 6 bar: 950 L/min F.A.D. at 8 bar: 950 L/min F.A.D. at 10 bar: 930 L/min Outlet port diameter (G): 3/4" Dimensions: 1320 x 650 x 945 mm Weight: 320 kg

Kondisi: baru, Tahun pembuatan: 2026, Screw Compressor CORMAK LUFT 700 VSD+PM Compact with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. 500 L horizontal compressed air receiver. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series are equipped with Permanent Magnet (PM) motors. Unlike conventional induction motors: They achieve efficiency levels in accordance with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (where standard motors lose their efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control Nwjdpfxsycg Ryo Af Rsi The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an ‘all-or-nothing’ (load/unload) mode. If your machine only requires 30% output, the compressor reduces its speed, proportionally lowering energy consumption. Elimination of idle running: Conventional compressors often continue to run idle for several minutes after the receiver is filled, consuming approx. 25–30% of their rated power without producing compressed air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the plant’s electrical installation. Enables frequent starts and stops without risk of winding overheating. 4. Real Savings In practice, using the Energy Saver line can reduce electricity costs by 30% to 50% compared to conventional fixed-speed compressors. Additionally, the system keeps network pressure extremely stable (accuracy up to 0.1 bar), which is essential for precision equipment such as laser cutters. Longer lifespan: The absence of sudden pressure and temperature fluctuations extends the screw element’s operating life. Technical specifications Motor power 5.5 kW / 7.5 HP Voltage 400V/50Hz Output at 0–6 bar average 690 L/min Output at 6 bar 690 L/min Output at 8 bar 650 L/min Output at 10 bar 650 L/min Outlet connection diameter (G) 1/2" Dimensions 1840 x 640 x 1470 mm Weight 320 kg

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1500 screw compressor with inverter, vertical 1000 L air receiver with accessories, and IZBERG N20S dryer. The CORMAK LUFT series screw compressor from the Polish brand CORMAK incorporates state-of-the-art solutions in pneumatics, paired with the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Technical specifications LUFT 1500 INVERTER: - Motor power: 11 kW Nsdoxnyhuspfx Af Rjwi - Voltage: 400V/50Hz - Output at 0-6 bar: 1620 L/min - Output at 6 bar: 1580 L/min - Output at 8 bar: 1350 L/min - Output at 10 bar: 1230 L/min - Outlet connection diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg Technical specifications IZBERG N20S: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Flow rate: 2800 l/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Type and quantity of refrigerant: R134a, 550 g Technical specifications 1000L VERTICAL AIR RECEIVER: - Weight (kg): 230 - Connections: 6 - Connection size: 2", 1/2" - Size: 230 x 80.8 cm - Tank capacity (l): 1000 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 808 - Height (mm): 2300

Kondisi: baru, Tahun pembuatan: 2026, Set including THEOR 20 INVERTER screw compressor and N20S refrigerated air dryer. The CORMAK THEOR series screw compressor, manufactured by a Polish brand, offers state-of-the-art solutions applied in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance guarantee efficient and trouble-free operation. Additional dual filtration at the dryer! THE SET INCLUDES: - THEOR 20 compressor with inverter (frequency converter version) - N20S REFRIGERATED AIR DRYER Please note: The set does NOT include an air receiver! Air receiver available as an additional option. Technical specifications THEOR 20 COMPACT Nwsdpomqlqdjfx Af Rsi Compressor Motor power: 15 kW Dryer Motor power: 0.69 kW General parameters Capacity @ 6 bar: 1800 l/min Capacity @ 8 bar: 1700 l/min Capacity @ 10 bar: 1600 l/min Outlet: G3/4" The quoted price is net. Transport costs are not included. For further information, feel free to contact us by phone or email. Please visit our website to view the full offer.

Kondisi: baru, Tahun pembuatan: 2026, Screw Compressor LUFT 1500 COMPACT with Refrigerated Compressed Air Dryer. The CORMAK LUFT series screw compressor, manufactured by the Polish brand CORMAK, represents the latest advancements in pneumatic technology, utilizing high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, and high unit performance ensure efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: - Advanced Technology and Efficiency: The screw modules deliver outstanding performance and exceptional operational efficiency. Their design focuses on maximizing output while minimizing energy consumption. - Precision and Control: Thanks to advanced technical solutions, the screw modules allow for precise control over the compressed air generation process. This results in stable pressure and optimal operation across the entire pneumatic system. - Durability and Reliability: The screw modules used in CORMAK compressors are designed for longevity. Their robust construction and use of high-quality materials provide reliable operation even in demanding industrial environments, minimizing downtime and reducing the need for frequent repairs. Nwsdpjxnk Acofx Af Rei Integrated Refrigerant Dryer – Top Air Quality - Two-Stage Drying System: Effectively removes moisture and protects the pneumatic installation. - Variable-Speed Fan: Automatically adjusts cooling performance to working conditions, optimizing energy consumption. - Dual Filtration System: Pre-filter with 3.0 µm accuracy removes larger solid contaminants, while precision filter with 0.1 µm accuracy retains fine oil particles (aerosols) and other impurities, delivering the highest air purity. Technical Specifications: Motor Power: 11 kW Voltage: 400V/50Hz Free Air Delivery 0-6 bar: 1620 L/min Free Air Delivery at 6 bar: 1580 L/min Free Air Delivery at 8 bar: 1350 L/min Free Air Delivery at 10 bar: 1230 L/min Outlet Connection Diameter (G): 1" Dimensions: 1550 x 740 x 1150 mm Weight: 500 kg Manufacturer: Cormak

Kondisi: baru, Tahun pembuatan: 2026, CORMAK LUFT 700 VSD+PM Compact Rotary Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Rotary Screw Compressor with integrated dryer 270 L horizontal compressed air receiver tank Key features that distinguish these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency in line with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). Are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) At the heart of the Energy Saver range is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate in an "all or nothing" load/unload system. If your machine only requires 30% output, the compressor reduces speed and uses proportionally less energy. Elimination of idle running: Conventional compressors often continue running for a few minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. Nsdeycg I Sspfx Af Rewi 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges at startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Genuine Savings In practice, using the Energy Saver range allows you to reduce electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains highly stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Increased longevity: No sudden spikes in pressure or temperature, resulting in longer rotary screw unit service life. Technical specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0–6 bar: average 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Kondisi: baru, Tahun pembuatan: 2026, A set including the LUFT 700 VSD+PM screw compressor, a vertical 200 L air receiver with fittings, and an IZBERG N10S dryer. The CORMAK LUFT series screw compressor, from a Polish manufacturer, features the latest advancements in pneumatics combined with high-quality materials and components. Low running costs, ease of operation, ergonomic and robust design, and high performance ensure reliable and trouble-free operation. Technical specifications of the compressor: - Motor power: 5.5 kW / 7.5 HP - Voltage: 400V / 50Hz - Output at 0-6 bar (average): 690 L/min - Output at 6 bar: 690 L/min - Output at 8 bar: 650 L/min - Output at 10 bar: 650 L/min - Outlet connection diameter (G): 1/2" - Dimensions: 800 x 520 x 740 mm - Weight: 95 kg Technical specifications of the IZBERG N10S air dryer: Nwedpfoyguq Aex Af Rsi - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type and quantity: R134a, 400 g Technical specifications of the 200 L pressure vessel: - Weight: 80 kg - Connections: 6 - Connection sizes: 1/2", 1", 2" - Size: 166.5 x 45 cm - Vessel capacity: 200 L - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 450 mm - Height: 1665 mm Included accessories: - 1/2" plug – 2 pcs. - 1/2" nipple – 1 pc. - 1/2" tee – 1 pc. - 1/2" to 1/4" reducer – 1 pc. - 1/4" pressure gauge – 1 pc. - 1" to 3/4" reducer – 2 pcs. - 1/2" ball valve – 1 pc. Note: A safety valve is not included in the kit. It must be supplied separately by the user.

Kondisi: baru, Tahun pembuatan: 2026, A set comprising a LUFT 1000 screw compressor with frequency inverter, a vertical 500 L compressed air receiver with accessories, and an IZBERG N10S dryer. The CORMAK LUFT series screw compressor, produced by the Polish brand, incorporates the latest innovations in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly service, ergonomic yet robust design, and high device efficiency ensure reliable and trouble-free operation. Technical specifications – LUFT1000 INVERTER: - Motor power: 7.5 kW - Voltage: 400V/50Hz - Capacity at 0–6 bar: 990 L/min - Capacity at 6 bar: 950 L/min - Capacity at 8 bar: 950 L/min - Capacity at 10 bar: 930 L/min - Outlet port diameter (G): 1/2" - Dimensions: 810 x 610 x 850 mm - Weight: 160 kg Technical specifications – IZBERG N10S air dryer: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type/quantity: R134a, 400 g Technical specifications – 500L air receiver: - Weight: 145 kg - Connections: 6 - Connection size: 1.1/4", 2", 1/2" - Dimensions: 209.8 x 60 cm Njdpfx Aexa Ah Uef Rowi - Tank capacity: 500 L - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 600 mm - Height: 2098 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 4, Kira-kira 86 juta cetakan Versi CX pengumpan tanpa henti pencetakan langsung 4+0 pelat SAPC pembersihan otomatis pendaftaran otomatis Nsdpfx Aeyr N D Usf Rswi KBA RapidDry Pelapisan bubuk Grafix Dalam proses produksi Tersedia pada bulan Juli/Agustus 2026

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Tersedia instalasi pengawetan dan impregnasi kayu berukuran besar dari Wichmann-Metallbau. Volume nominal: 28 m³. Pemeriksaan di lokasi dapat dilakukan. Nsdszpyxpepfx Af Rswi

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Nwsdpjzmdl Iofx Af Rji

Kondisi: diremajakan ulang (bekas), HERBOLD szárító/száraz tisztító/frikciós tisztító T 1003 MA típus Nodpezmdk Djfx Af Rjwi

Kondisi: bekas, kW: 30 Rotor diameter: 500 mm Nodpfjzmdkksx Af Rjwi Rotor width: 1200 mm

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Nwedpfx Aszmdi Tof Rji

Kondisi: bekas, kW: 30 Njdezmdi Hspfx Af Rowi Rotor diameter: 500 mm Rotor width: 1200 mm

Kondisi: diremajakan ulang (bekas), HERBOLD Pengering/Pembersih/Pengering kering Tipe T2015 Nodpfx Afezmdiyo Rowi Daya penggerak 45-132 kW tergantung pada kinerja yang diminta dan tugasnya Penggunaan: Pengeringan dan pembersihan plastik keras, serpihan PET (maks. 4 ton/jam output) dan film (1,2-1,6 ton/jam) Rotor diameter 1200 mm x panjang 2300 mm Lubang saringan standar 2,5 mm lubang bulat Dengan penggerak sabuk V

Kondisi: diremajakan ulang (bekas), HERBOLD szárító/száraz tisztító/frikciós tisztító T 1003 MA típus Nedpfx Afezmdits Rewi

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Nwedpszmdbvofx Af Rsi