Beli Karl Klink Kerucut Mesin Broaching bekas (77.698)

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly Iaedjw H Dgnopfx Aa Djw - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 480 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, kecepatan mundur: 100 mm/dtk, diameter benda kerja (maks.): 800 mm, tinggi total: 1.680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of Manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine, make Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working area: 430 mm x 320 mm / 340 mm x 220 mm Table bore: Ø 90 mm for standard broaching mandrels “System Rausch” Workpiece diameter: unlimited (with removable coolant swing system) Broaching capacity / slot width: up to 20 mm in steel (for broaching tools from 16 mm slot width only with stepped tool shafts) Dimensions (h x w x d): 1370 mm x 680 mm x 750 mm (h = table height to floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with interlock, safety query and safety monitoring - Easily removable swarf chute with tool extraction protection and parking bracket - Externally adjustable tool length setting system (reproducible machine-wide) - Protective covers for stroke adjustment and electrical switchgear - Oil-tight shelf on control cabinet - Electrical sensing of clamping jaws (tool removal control to prevent unintended return of pull bridge, providing additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing system - Extra reinforced swarf basket and swarf screen with magnetic insert - Stainless steel operating panel with permanent markings - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-wiring for external control unit (16-pin connector) - Provision for automatic jaw opening when broaching profiles via roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic jaw openers for easier tool removal during profile broaching - Three-sided splash guard enclosure (w x d x h): 700 x 350 x 600 mm - External electrical operating unit for broaching and return stroke as well as emergency stop operation Notes: The machine is 100% compatible with Rausch broaching machines of the same performance classes in the RS 3, RS 4, and RS 6 series. All fixtures, tools, and mandrels can be used without restriction. General Information Iajdjw D E Twepfx Aa Dsw The dual spindle drive ensures a smooth and central pulling action with a consistent broaching speed. The machine is primarily designed for cutting keyways up to 20 mm (for broaching tools from 16 mm width only with stepped tool shafts). The machine’s design enables fast and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table allow broaching with both profile and flat broaching tools. Profile broaching is possible without additional pull heads, simply using centering bushes. Broaching tools and mandrels compatible with the machine are available upon request.

Kondisi: bekas, Tahun pembuatan: 1986, berat keseluruhan: 6.500 kg, daya: 42 kW (57,10 hp), tegangan masuk: 380 V, panjang broaching: 1.600 mm, jumlah posisi broaching: 1, diameter benda kerja (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine number: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 piece Clear width between cylinders: max. 540 mm Cutting speed: hydraulically variable from 1 m/min up to max. 8 m/min Return speed: hydraulically variable up to max. 18 m/min Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-actuated locking mechanism (DIN 1417) in the drawbridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant unit with an integrated chip conveyor for installation in a pit. Isdpfewqmaxjx Aa Deaw Remarks: The machine still has its original paintwork. It is designed for use in series production for medium and large batch sizes. For optimal utilization, installation in a pit is ideally recommended. Draw heads and ejector pins are available on request. The machine is available for inspection at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg up to 63,000 kg, both in horizontal and vertical execution, in stock. Many of our broaching machines in stock are available for demonstration. If required, we can offer you used equipment such as draw heads, ejector pins, broaching tools, and other specific accessories. As a contract broaching service provider, we can also assist you with technical enquiries based on our 50 years of experience in broaching technology.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) Ijdjw Huh Njpfx Aa Doaw - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 370 kW (503,06 hp), jenis bahan bakar: hibrida, warna: lain, Perlengkapan: ABS, hidrolik, kabin, DE: Die mobile Brechanlage CONSTMACH JCV-1 ist ein dreiachsiges mobiles System, das speziell für professionelle Brech- und Siebanlagen mit höchsten Kapazitätsanforderungen und erstklassiger Leistung konzipiert wurde. Die CV-1 gewährleistet maximale Effizienz beim Zerkleinern von Gesteinsarten mit hoher Härte wie Granit, Basalt, Dolomit und vergleichbaren Materialien. Sie stellt außerdem eine ideale Lösung für die Produktion großer Mengen an Feinmaterial sowie für die Herstellung von hochwertigem, kubisch geformtem Zuschlagstoff dar. Die Anlage basiert auf ausgefeilter Ingenieurtechnik, langlebigen Komponenten und der Zuverlässigkeit, die die CONSTMACH-Qualität auszeichnet. Das JCV-1-System besteht aus einer Kombination von mobiler Backenbrecher-, Kegelbrecher- und Vertikalprallbrecher-Einheit (VSI). Diese Konfiguration ermöglicht die gleichzeitige Gewinnung von Material in fünf unterschiedlichen Fraktionen. Das PLC-gesteuerte Automatisierungssystem arbeitet mit hochwertigen elektronischen Komponenten der Marken SIEMENS und SCHNEIDER und die Steuerung der Anlage erfolgt bequem über ein einziges Tablet. Iedpfx Aexqcmrja Deaw Das modulare und mobile Design gewährleistet Konformität mit internationalen Straßenverkehrsstandards. Das hydraulische Fußsystem ermöglicht eine schnelle, einfache Installation und Inbetriebnahme. Optional kann die Stromversorgung durch einen Dieselgenerator direkt vor Ort abgedeckt werden. Technische Daten der JCV-1 Mobilen Brech- und Siebanlage: Produktionskapazität: 60-80 t/h Maximale Aufgabegröße: 610 x 380 mm Hauptkonfiguration: Backenbrecher + Kegelbrecher + VSI + Vibrationssieb Gesamtantriebsleistung: 370 kW Erforderliche Generatorleistung: 750 kVA Gesamtgewicht der Anlage: 90 Tonnen Abmessungen: 1. Fahrgestell – 10 (L) x 3,1 (B) x 4,4 (H) m 2. Fahrgestell – 17 (L) x 3,8 (B) x 4,4 (H) m 3. Fahrgestell – 17 (L) x 3,8 (B) x 4,4 (H) m Fahrgestelltyp: Hydraulisch klappbare Stützfüße, dreiachsiges Fahrwerk Warum den CV-1 Mobilen Backenbrecher wählen? Der CONSTMACH CV-1 ist die ideale Lösung für Anwender, die maximale Effizienz und Flexibilität bei mobilen Brechanlagen suchen. Die einfache Transportfähigkeit, die kurze Aufbauzeit sowie die fortschrittliche Automatisierung sparen wertvolle Zeit und Arbeitskraft. Neben der dauerhaft zuverlässigen Leistung sorgt die anwenderfreundliche Gestaltung für minimale Wartungs- und Betriebskosten. Wenn Sie Wert auf höchste Materialqualität, Langlebigkeit und wegweisende Technik legen, erleben Sie mit dem CV-1 Mobilen Backenbrecher den Unterschied von CONSTMACH direkt auf der Baustelle. Was macht Constmach? Constmach ist ein führender Maschinenhersteller mit einem breiten Portfolio an Lösungen für die Bau- und Bergbauindustrie. Unser Produktspektrum umfasst Betonsteinfertigungsmaschinen, stationäre und mobile Betonmischanlagen, Steinbrecher, Brech- und Siebanlagen, Sandwaschmaschinen, Sandherstellungsanlagen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher sowie mobile Brechanlagen. Dank hoher Qualitätsstandards, innovativer Fertigung und konsequenter Kundenorientierung ist Constmach als verlässliche Marke national wie international etabliert. Unsere Produkte überzeugen Fachanwender durch Langlebigkeit, Effizienz und dauerhafte Leistungsfähigkeit und sind aus guten Gründen bevorzugte Wahl der Branche.

Kondisi: bekas, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom-Built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Frame opening: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Iajdjwki Apspfx Aa Dow Pressing speed, ram downwards: approx. 11.5 mm/sec = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec = 220 mm in 9 sec. Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for downstroke, 1 button for upstroke) - Hydraulic pump: HAWE, Type K5/3 (can also deliver 400 bar, but the pump is extremely loud at this pressure) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, lengths 110 mm and 130 mm - 2 support plates - Very robust steel construction made from 140 double T-beams - Estimated load capacity of the steel frame: likely 40 tons or more - Can be moved with a pallet truck Space requirements (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Iaedpfx Aajcdtple Djw Broaching stations: 3 units Weight: 4.8 t automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Ijdpfx Ae Rwa Usa Dsaw Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: Iaodpfx Aodbmgmsa Dew The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Iasdpfx Asdffzfsa Dow Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 3120, Manufacturer: Varinelli Milano Italy Model: BV 25 x 2000 x 630 Year of manufacture: 1982 Machine no.: 3120 Weight: 13,000 kg General / Technical Data: Vertical hydraulic internal broaching machine with 3 broaching stations and a movable workpiece table, in good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 200 mm Clear width between cylinders: max. 630 mm Cutting speed: hydraulic, steplessly adjustable from 1 m/min up to max. 9 m/min Return speed: hydraulic, steplessly adjustable up to max. 18 m/min Iedpfjd I R Ngsx Aa Deaw Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt 50 Hz / 43 kW Accessories / Special equipment: The machine is equipped with a workpiece shuttle table for 3 broaching stations. The tool clamping system features a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The automatic tool feeder is hydraulically and mechanically locked. The machine is fitted with a coolant system and an integrated chip conveyor for installation in a pit. Remarks: The machine is in good condition and still has its original paintwork. It is designed for series production of medium and large batch sizes; for optimal use, installation in a pit (foundation) is required. Pulling heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1971, Kondisi: bekas, General / Technical Data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6,000 kg Pulling force: 20 t Stripping speeds: 5 m/min Return speed: 16 m/min Maximum stroke: 1320 Stripping stations: 3 Iaodpfx Aaolwu Spe Dow Clamping area: 370 x 620 x 105 mm Note: The machine is connected to power at our warehouse and can be inspected.

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Iajdegyd T Espfx Aa Dsw Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Tahun pembuatan: 1971, Kondisi: bekas, General / Technical Data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 tons Tensile force: 25 tons Maximum stroke: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Power supply: 380 Volts / 50 Hz Iaedpelwvm Aefx Aa Dow Accessories / Special equipment: - Tilting table Note: The machine is connected to power at our warehouse and can be inspected.

Tahun pembuatan: 1993, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 3694/895,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Iajdpfxsr A Hdgo Aa Dew Type: Horizontal Broaching Machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.

Tahun pembuatan: 1977, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 3273, Manufacturer: Neff Model: 16 SRKA Year of manufacture: 1977 Weight: approx. 4000 kg Machine no.: 3273 General / Technical Data: Used vertical hydraulic broaching press in good, ready-to-use condition Pressing force: 16,000 kg Stroke: 1,300 mm Throat depth: 250 mm Iaodpfx Aed N Rl Nea Dew Installation height: 1,500 mm Table size: 680 x 450 mm Table opening: 160 x 380 mm Table height from machine base: 1,600 mm Ram speed: hydraulically infinitely variable Machine dimensions (W x D x H): approx. 1,000 x 1,800 x 5,100 mm Power supply / Rated power: 380 V, 50 Hz / 22 kW Accessories / Special Features: • Integrated coolant system • Press force indicator • Press force limitation • Speed regulation Remarks: The machine is in operational condition and retains its original paintwork. The work stroke is manually initiated via hand or foot control. The machine is powered and available for demonstration at our warehouse.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Ijdpfx Aaeixntws Doaw Power supply: 380 Volt / 50 Hz / 5 kW

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Ijdpfshu E Egjx Aa Deaw Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Kondisi: belum diuji (bekas), Forst RF 16 Internal Broaching Machine -WKG 1371- Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Iaedpehu E N Dofx Aa Djw Maximum Tool Diameter: Ø 120 mm Workpiece Fixture Seat: Ø 70 mm Note: Control valve missing

Tahun pembuatan: 1973, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 5116/447,

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Iedpelpadyofx Aa Dsaw Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Tahun pembuatan: 1972, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Iasdpocdtnhsfx Aa Dew Maximum return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 34, Grosszugkraft: 10 t Max. Hubhöhe: 1000 mm Schnittgeschwindigkeit: 7,5 m/min Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Die Maschine ist zum Ausschälen von Rohren geeignet. Iaodpfend Dmjx Aa Dew

Kondisi: bekas, Tahun pembuatan: 2000, de-techdetails-01 Iasdpfsw Dugajx Aa Dsw