Beli Mep Avt400 bekas (175)

Kondisi: baru, Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 - 100 m/min Vise opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Gjdpfjyv Nylex Aa Hebt Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic bandsaw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing programming of up to 1000 different cutting programs with varying cut lengths and quantities for identical material dimensions. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button) - Manual or semi-automatic dynamic cycle allows cuts to be made directly, without programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for technical parameters such as: - Saw blade speed - Number of programmed and performed cuts - Blade thickness - Feed length - Cutting time - Ammeter - Blade tension - Indication of approx. 100 diagnostics and warning messages, all in the operator’s language - Display and recording of alarms and error messages, with the ability to review occurred incidents - Automatic parameter adjustment via control system when a new drive or inverter is installed - Electronic inverter for continuous adjustment of the blade speed from 15 to 100 m/min - Next-generation hydraulic control unit—high performance with low energy consumption - New 600 mm material feeding system using stepper motor and ball screw mounted on opposed bearings - Programmable stroke range for the saw arm directly from the control panel to adjust to the cutting material - Electronic blade tension control - Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder - Coolant tray (equipped with 2 electric pumps for lubrication and cooling of the saw blade) integrated into the machine base - Chip drawer (can be replaced by a chip conveyor—see special accessories) - Prepared for installing a minimum-quantity lubrication system for the saw blade (optional), in addition to the standard emulsion oil lubrication system - Chip removal brush - Machine designed for transport by pallet truck - Bi-metal bandsaw blade suitable for solid and profile materials.

Kondisi: bekas, * Saw blade diameter: 350 mm * Cutting capacity at 90° (round): 120 mm * Cutting capacity at 90° (square): 105 mm * Cutting capacity at 90° (flat): 180 x 70 mm * Cutting capacity at 45° (round): 120 mm * Cutting capacity at 45° (square): 100 mm * Cutting capacity at 45° (rectangular): 135 x 60 mm * Saw blade speeds: 1700 / 3400 rpm * Total power requirement: 1.5 / 2.2 kW * Machine weight: approx. 0.210 t * Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminum, capable of mitre cuts from 45° right to 45° left, with the saw head swiveling from 0° up to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when lowering the saw head. • Roller-bearing turntable for rapid and precise mitre adjustment • Screw locking system to fix the saw head in any angular position • Automatic saw blade lubrication • Clamping system consisting of two vices Gsdpfx Aasfc T Ufo Hjbt • Saw head lock in the upper position • Adjustable length stop for consistent cut lengths • Vice opening: 180 mm

Kondisi: baru, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Gbodpfx Aajyv Nmls Hjt Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic-dynamic and manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. The MEP 30 represents the latest generation of controls. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via manual push button - Upper position is saved automatically Main features: - Hydraulic unit with solenoid valve, highly efficient and high-pressure hydraulic pump (200 bar) - Electronic machine control with new-generation microcontroller - Centralized electrical system in the main switch cabinet - Display for alarms, diagnostics, and machine functions (cutting time, number of cut pieces, amp draw of saw blade motor, saw head position, saw blade speed, blade tension) - Manual-semi-automatic/dynamic function as standard Additional features: - Low-voltage control panel: Polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual 24 V cycle switch handle, IP55 - Complete program of all special cutting cycles - New hydraulic control unit with low energy consumption; stand-by operation - Rotary table on roller bearing, 420 mm, with preloaded thrust bearing, equipped with interchangeable steel worktable - Saw bow stroke programmable directly from control panel to adapt to material size - Clamping device laterally adjustable to left and right, with quick-acting vice - Manual blade tension control with display on screen via electronic converter

Kondisi: baru, Model designation Godel Sva Iepfx Aa Hsbt SHARK 331-1 NC 5.0 SPIDER

Kondisi: baru, 1 Godpfx Ajyvvqkoa Hebt

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left Gedsxz Hhzspfx Aa Hebt CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar meja: 850 mm, panjang meja: 570 mm, lebar total: 1.265 mm, berat keseluruhan: 5.500 kg, Excenter Press dengan Rangka C 60 ton. BARU Daya tekan 60 ton. Titik kapasitas nominal 4 mm TINGGI MAKS. CETAKAN TERTUTUP 310 mm PENGATURAN LANGKAH (SEMIAUTOMATIS) 20/100 mm Kecepatan 60 SPM Diameter lubang pengunci cetakan 50 mm Kedalaman tenggorokan (dari tengah lubang ke belakang) 275 mm Godpfoxtpltsx Aa Hobt Pengaturan langkah ram 80 mm Dimensi ram 580 x 350 mm Dimensi meja 850 x 570 mm Diameter lubang meja 150 mm Tinggi meja dari lantai 795 mm Berat sekitar 5.000 kg Tinggi 2430 mm Kedalaman 1370 mm Lebar 1265 mm Motor 5,5 kW

Kondisi: baru, Tahun pembuatan: 2024, Manual cutting cycle Automatic cut: (via selector switch) with stepless adjustment of descent speed and adjustment of cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted rotary table, center-axis-bolted and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Hydraulic unit for saw band tensioning and monitoring with display on the manometer Clearly arranged control panel with all operating elements Base frame, coolant tray, coolant pump, chip brush Cutting diameter: 250 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Max. vice opening: 285 mm Band speed: 36 / 72 m/min Cutting capacity at 90 degrees, round: 250 mm Cutting capacity at 90 degrees, square: 220 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 60 degrees, round: 120 mm Cutting capacity at 60 degrees, flat: 140 x 80 mm Cutting capacity at 60 degrees, square: 80 mm Cutting capacity at 45 degrees, round: 200 mm Cutting capacity at 45 degrees, flat left: 220 x 200 mm / right: — Cutting capacity at 45 degrees, square left: 200 mm / right: 170 mm Machine weight approx. 0.4 t Space requirement approx. 1.8 x 1.3 x 1.8 m Godsftmxvjpfx Aa Hjbt

Kondisi: baru, PH 261-1 HB Gedpfxjl H Dydo Aa Hsbt

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100 x 100 / 95 x 95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Blade speed: 1,700 / 3,400 rpm Control system: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions L x W x H: 1,240 x 1,360 x 1,800 mm Equipment: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control * user-friendly interface with display and mechanical keys * start and end positions of the saw head can be saved - Manually opening safety hood - Mechanical stops at -45°, 0°, +45° * enable quick positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows for adjustable clamping pressure * depending on material hardness * optional pneumatic vertical vice available Gbedpsxaa Hnefx Aa Hot - Heavy cast iron construction ensures vibration-free operation and highest precision - Saw head can be additionally tilted up to 45° - Two saw blade speeds - Base frame with lockable door - Pneumatic coolant/lubrication system - Machine base Scope of delivery: - adjustable length stop, 600 mm - tool kit - adapter for infeed roller conveyor including 1 supporting roller - tool kit - comprehensive operating and maintenance manual, etc. - Machine is supplied without saw blade!

Kondisi: baru, de-hu-1 Godpfxsyv Nl Ie Aa Hjbt

Kondisi: baru, 001 Gedpeyv Narefx Aa Hebt

Kondisi: baru, SHARK282CCS-HU-20240611 Gbjdpfoyv Nptsx Aa Hst

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice with 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H): 1800 x 1900 x 1750 mm Equipment/features: - Heavy-duty electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE”-based MEP 50 control and 7” touch screen display * Simple and rapid adjustment of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 parts and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any desired length * Accuracy of ±0.1/600 mm - Feeder with protective cover and safety limit switch - Precise adjustment of cutting feed with display in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Blade tension with belt tension monitoring and display indication Godpjxaa Ewsfx Aa Hjbt - Carbide blade guides for highest cutting accuracy - Automatic monitoring of cutting load - Quick-adjustable vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for blade cleaning - Operating manual in German Manufacturer's note – please observe: When installing this saw in a power network equipped with residual current device (RCD), it should be a type B all-current sensitive RCD with a rating not below 300 mA.

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame Gbsdpfx Aasxaatbs Hjt * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Diameter pemotongan: 300 mm Area pemotongan pada 90 derajat: bentuk datar 330 x 260 mm Area pemotongan pada 90 derajat: bentuk persegi 260 x 260 mm Area pemotongan pada 45 derajat: bentuk datar 270 x 200 mm Area pemotongan pada 45 derajat: bentuk bulat 260 mm Area pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Area pemotongan pada 60 derajat: bentuk datar 170 x 170 mm Area pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Area pemotongan pada 60 derajat: bentuk bulat 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3650 x 27 x 0,9 mm Pengendali: MEP Daya motor: 1,5 / 1,8 kW Berat: 670 kg Gbedpfoxaav Aex Aa Hot Fitur: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan sudut miring melalui piring putar besar - Pengendali mikroprosesor MEP EVO untuk mengontrol semua fungsi * Dapat diputar, terletak di bagian depan kanan - Penurunan busur gergaji secara manual atau otomatis * Pengaturan tanpa langkah penurunan busur gergaji - Panduan pita gergaji dari pelat karbida - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut - Sikat pembersih serpihan - Rangka mesin dengan kantung untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepit elektro-hidraulik dari penjepit - Penurunan elektro-hidraulik dari busur gergaji - Pengangkatan elektro-hidraulik dari busur gergaji - Pembukaan elektro-hidraulik dari penjepit

Kondisi: bekas, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 120 mm Gjdpfx Aasfc T Ugs Hebt Cutting range at 90 degrees (square): 105 mm Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.

Kondisi: baru, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 350 mm Saw blade dimensions: 4640 x 34 x 1.1 mm Vise opening: 355 mm Saw band speed: 15–115 m/min Machine weight approx. 2,800 kg Space requirement approx. 3050 x 2190 x 2200 mm Shark 350 NC HS 5.0, fully automatic hydraulic band saw with double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Driven chip conveyor, installable on the right or left side of the machine + Adjustable clamping pressure for vises + Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated in semi-automatic mode, featuring the latest MEP 50 control, developed by MEP specifically for automatic machines, based on Windows “CE” operating system - “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring at the cut surface when the saw band lifts at the end of the cut - Fieldbus communication system with dual microprocessors and serial connection - User interface with 7” touchscreen display and mechanical keys for operating functions of the saw, ensuring reliable, simple, and intuitive operation as well as real-time control of all cutting parameters Gjdpfxeyv Nd Ro Aa Hobt - Automatic detection of the cut starting position - CNC machine to store up to 100 cutting programs with different quantities and lengths; also possible to select up to 100 programs as a cutting sequence - Robust cast iron construction for vibration absorption and to guarantee stable cutting precision and long saw blade life - Hydraulic saw bow feed on linear guides with preloaded ball recirculation rails - Hydraulic control for opening/closing of forward and frontal vises - Infinitely variable saw band speed from 15 to 110 m/min via vector inverter - Material feed by stepper motor and ball screw spindle, mounted in opposing ball bearings, with 600 mm stroke (repeatable for cutting any length) - Max. remnant length 120 mm + cutting length (OPTIONAL: feeder jaws to minimize remnants to 25 mm + cutting length) - Cut progression monitoring (OPTIONAL) - Material feeder with self-aligning feeding vise for feeding even slightly bent material - Saw drive wheel clamped via conical clamping set, ensuring optimum fixation with simultaneous axial adjustment capability - Management software to monitor/evaluate/correct in real time: cutting force, cutting torque, saw band tension compared to programmed values - Adjustable saw blade guidance heads made of steel with combined roller and carbide guideways and control valves for conventional circulating lubrication - Preparation for installation of OPTIONAL minimum quantity lubrication system - Saw drive wheel adjustment for blade change directly from the operator console - Automatic adjustment of the front saw blade guide head to material size - Machine...

Kondisi: baru, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Total power requirement: 4 kW Weight: 1190 kg Gbodpfx Asyv Nkksa Hot Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control system for mitre cuts from 0° to 60° left. The MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor stops - Saw head raises – vice opens Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with latest-generation micro-controller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor current draw, saw head position, bandsaw speed, band tension)

Kondisi: baru, Model designation Gedogvkafopfx Aa Hjbt Shark 332-1 SXI evo

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Godpfxsfg E H So Aa Hjbt Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Sägeblattabmessungen_350_x_32_x_3,4_mm Godpfx Aaoyv Nqqj Hobt

Kondisi: baru, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vise width: 235 mm Speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control system: MEP CNC Total power requirement: 3.18 kW Machine weight approx.: 1175 kg Space requirement approx.: 1980 x 1105 mm * Automatic double-column bandsaw with only 2.5 sqm footprint * * Maximum performance in the smallest space * Equipment: - Powerful CNC bandsaw machine with double-column design * for 0° cuts - Windows-CE based touch-screen controller * Swivel control panel, adjustable from 5.0 to 180° * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently repeated jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Powered linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable for all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed adjustment from 15 to 100 m/min - Robust cast iron frame (G25) to compensate for vibrations - Safety enclosure according to the latest safety regulations Gbodexabq Uopfx Aa Hot . In accordance with Machinery Directive EN 13898/2007

Kondisi: baik (bekas), Radial fan, chip extraction blower, fan, extraction system, dust extraction unit, chip blower, extraction unit Gedpfx Aajh Szars Hjbt - Manufacturer: MEP, extraction unit with transport frame - Type: unfortunately no type designation - Motor: Cantoni 0.75 kW / 2840 rpm - Base frame: on castors - Dimensions: 950/480/H1860 mm - Weight: 40 kg

Kondisi: baru, Diameter pemotongan: 300 mm Rentang pemotongan pada 90 derajat: bentuk pipih 380 x 250 mm Rentang pemotongan pada 90 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 45 derajat: bentuk pipih 300 x 200 mm Rentang pemotongan pada 45 derajat: bentuk lingkaran 260 mm Rentang pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 60 derajat: bentuk pipih 200 x 170 mm Rentang pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Rentang pemotongan pada 60 derajat: bentuk lingkaran 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3770 x 27 x 0,9 mm Daya motor: 1,5 / 1,8 kW Berat: 695 kg Kebutuhan ruang: sekitar 1950 x 1300 x 200 mm Perlengkapan: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan miring melalui piring putar besar - Kontrol mikroprosesor MEP EVO untuk mengontrol semua fungsi * Dapat diputar, terletak di depan kanan - Penurunan busur gergaji secara manual atau otomatis, dapat dipilih * Pengaturan bertahap penurunan busur gergaji - Panduan pita gergaji terbuat dari pelat logam keras - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut Gbjdpfx Aajxaax Do Hst - Sikat pembersih serpihan - Rangka mesin dengan tempat untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepitan vise secara elektro-hidraulik - Penurunan busur gergaji secara elektro-hidraulik - Pengangkatan busur gergaji secara elektro-hidraulik - Pembukaan vise secara elektro-hidraulik