Beli Mesin Ulir Internal bekas (83.027)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Milling Ulir WMW Jerman GFL-400 x 1000 mm Merek: WMW (Jerman) Model: GFL-400 Tinggi senter: 205 mm Nwedoy Rgm Eopfx Adioi Panjang maksimal benda kerja: 1000 mm Diameter maksimal benda kerja di atas cross-slide: 200 mm Diameter ayun maksimal di atas ranjang: 400 mm Kecepatan cutter: 55 rpm hingga 250 rpm Diameter cutter maksimal: 100 mm Lubang spindle: 80 mm - Dapat digunakan untuk milling ulir, milling worm, dan milling spline. - Juga dapat digunakan untuk gear hobbing & spline hobbing. - Lengkap dengan roda gigi ganti, pelat indeks, arbor, dan aksesoris lainnya. - Mesin dalam kondisi kerja yang sangat baik.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin frais ulir Merek: WANDERER Model: 31L1000 Panjang putar: 1000 mm Tinggi di atas cross slide: 125 mm Lubang spindle: 80 mm Nwjdpfxsy Rgmxo Adiji Sudut putar di atas ranjang: 420 mm Diameter alat: 120 mm Kecepatan putar: 55–250 rpm

Kondisi: siap digunakan (bekas), Mesin bubut L & Z / WEILER CONDOR VS 2 dengan tampilan digital 3-sumbu baru dari bengkel pelatihan - Tampilan digital 3-sumbu "BARU" - Tinggi pusat 165 mm - Diameter putar di atas alas 330 mm - Jarak antara pusat 800 mm - Rentang kecepatan putar 28 - 2800 rpm - Gerak otomatis membujur/ratakan - Lubang spindle - Ekor tetap dengan senter - Collet / sistem penjepit cepat termasuk 25 collet - Chuck 3 rahang - Röhm 200 mm dengan rahang balik - Multifix / baru dengan sisipan - Lampu kerja - Tombol darurat / mati - Penghenti alas - Kaki mesin - Dokumentasi Njdpfey Ral Ijx Adijwi Dimensi: P x L x T 2 x 0,8 x 1,6 meter / Berat 900 Kg Kesalahan dan kekeliruan reservasi hak.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Nwjdpfx Adjt Dwb Dsiei Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: bekas, bohrmaschine-gewindeschneidmaschine-flott-tbz-15-gl Nedpfx Adodzp S Nsiswi

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), d2020_innenrundschleif_vo Nsdpey E S Hmjfx Adiewi

Kondisi: siap digunakan (bekas), WEILER Condor VS 2 dengan tampilan digital 3-sumbu baru dari universitas (laboratorium percobaan) - Tampilan digital 3-sumbu "BARU" - Panduan "Seperti Baru" - Tinggi pusat: 165mm - Diameter putar di atas ranjang: 330mm - Jarak antara senter: 800mm Nsdpfx Adey Efqrsijwi - Rentang kecepatan putar: 28-2800 rpm - Otomatis pemakanan memanjang / melintang - Lubang spindle: 40mm - Ulir / metrik / inci, dll. - Collet / perangkat penjepitan cepat termasuk collet - Chuck empat rahang - Röhm - Piringan datar - Multifix dengan sisipan - Emergency stop - Pelindung chuck - Dokumentasi Dimensi: PxLxT 2x0,8x1,6 meter / Berat 900Kg Kesalahan input dan penulisan dimungkinkan.

Kondisi: bekas, Tahun pembuatan: 1952, de-001 Nwedsyn R Nwspfx Adioi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 880 mm, panjang pemakanan sumbu X: 1.000 mm, panjang umpan sumbu Z: 100 mm, kecepatan pemakanan sumbu X: 1 m/menit, laju pemakanan gandar Y: 5 m/menit, posisi kepala milling: Horizontal, swivelling, tinggi pusat: 1.060 mm, jenis arus masuk: AC (pendingin udara), daya motor pengumpan: 4.000 W, panjang spindle milling: 200 mm, lubang spindel: 90 mm, kecepatan spindel (maks.): 400 rpm, kecepatan spindel (min.): 25 rpm, panjang mandrel: 200 mm, lubang collet: 90 mm, panjang penjepitan: 880 mm, diameter benda kerja (maks.): 500 mm, Gewindefräs- und Wälzfräsmaschine MSZ 5A352ПФ2 Das Modell MSZ 5A352ПФ2 ist eine universelle Gewindefräs- und Wälzfräsmaschine, die für das Bearbeiten von Keilwellen, Schnecken und zylindrischen Zahnrädern mittels Fräs- und Wälzfräsverfahren konzipiert wurde. Baujahr 1984, ist die Maschine für industrielle Anwendungen ausgelegt, die zuverlässige Leistung, Vielseitigkeit und wiederholbare Präzision erfordern. Die Maschine eignet sich für Werkstücke mit einer maximalen Länge von 1.000 mm und einem maximalen Durchmesser von 500 mm. Die maximale Bearbeitungslänge (Verzahnung/Gewinde) beträgt 880 mm. Es können Zahnräder bis Modul 8 gefertigt werden, was ein breites Anwendungsspektrum in der Gewinde- und Verzahnungsbearbeitung abdeckt. Helix- und Steigungswinkel bis 30° sind bearbeitbar, was einen flexiblen Einsatz im Maschinen- und Getriebebau ermöglicht. Die Fräs- und Wälzfrässpindel verfügt über eine Spindelbohrung von 90 mm und nimmt Werkzeuge mit einem maximalen Wälzfräserdurchmesser von 160 mm und einer maximalen Fräserlänge von 200 mm auf. Die Spindel arbeitet in einem Drehzahlbereich von 25 bis 400 U/min und bietet damit passende Schnittparameter für verschiedene Materialien und Werkzeugdurchmesser. Der Hauptantriebsmotor stellt mehrere Leistungs- und Drehzahlstufen zur Verfügung (5 / 6,3 / 10 kW bei 750 / 1.000 / 1.500 U/min). Nwjdpfxex Unpvs Adiji Die Maschine ist mit stufenlos einstellbaren Längs- und Radialvorschüben ausgestattet. Die Längsvorschübe sind von 2 bis 100 mm/min, die Radialvorschübe von 2 bis 50 mm/min regelbar, was eine präzise Steuerung während des Bearbeitungsprozesses ermöglicht. Der Fräskopf ist horizontal und schwenkbar ausgeführt, die Maschine erlaubt eine genaue Synchronisation beim Gewindefräsen und Verzahnen. Mit Gesamtabmessungen von ca. 3.100 × 2.270 × 2.100 mm (bis 3.540 × 2.515 × 2.100 mm mit Zusatzausrüstung) und einem Gesamtgewicht von ca. 7.890–8.500 kg verfügt die 5A352ПФ2 über eine robuste, schwere Konstruktion, die hohe Stabilität und gute Dämpfungseigenschaften gewährleistet. Der Betrieb erfolgt mit Drehstrom (380 V, 50 Hz), die Steuerung erfolgt über ein PU F5007 Steuerungssystem. Zustand: *Gebrauchtmaschine *Einsatzbereit *Voll funktionsfähig *Betriebsstunden: ca. 2.100 h Lieferumfang: *Kompletter Satz Wechselräder *Technischer Pass (russisch) *Betriebsanleitung (russisch) Typische Anwendungen: *Gewindefräsen *Wälzfräsen (Stirnräder, Schnecken) *Bearbeitung von Getriebekomponenten *Allgemeiner Maschinenbau *Reparatur- sowie Klein- und Mittelserienfertigung

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang pembubutan: 3.000 mm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 8.000 kg, diameter chuck tiga rahang: 310 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Setiap penawaran mengikat untuk pengambilan tepat waktu, yaitu antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! SPESIFIKASI TEKNIS Panjang pembubutan: 3.000 mm Tinggi center di atas ranjang: 300 mm Diameter pembubutan di atas ranjang: 600 mm Tinggi center di atas dudukan: 200 mm Diameter pembubutan di atas dudukan: 400 mm Kecepatan spindle: 9 hingga 1.800 rpm Lubang spindle: 110 mm Diameter chuck tiga rahang: 310 mm Diameter steady rest: 200 mm DETAIL MESIN Dimensi & Berat Nsdpsym Dcuofx Adiswi Dimensi (P x L x T): 6.000 x 1.400 x 2.000 mm Berat: 8.000 kg PERLENGKAPAN Ekor tetap Holder pahat Multifix Chuck tiga rahang Display digital dua sumbu (SONY) Steady rest Referensi eksternal: Pieper - Lot 57

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox Njdpfxeuz If Ne Adiewi - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Nsdpjh A S Htefx Adiewi Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: SIEMENS SINUMERIK 810, panjang benda kerja (maks.): 830 mm, kecepatan minimum spindel milling: 100 rpm, kecepatan spindle milling (maks.): 4.500 rpm, diameter pemasangan: 78 mm, technical-details-milling-lathe Njdoyl U Tuspfx Adiewi

Kondisi: sangat baik (bekas), de-001 Nwjdpfx Adeylbhxsisi

Kondisi: baru, Mesin penggulung benang Nwsdsyz Th Rspfx Adiji

Tahun pembuatan: 1981, Kondisi: baik (bekas), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Nwedpfx Aohad Avjdiei Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Nwsdpfx Ascdtplediei Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Nwjdpsui Sbjfx Adiei Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Schnittgeschwindigkeit: 5.6 m/min Nsdpfxj Rwa Uj Adiowi Rücklaufgeschwindigkeit: 30 m/min

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 Nwededbmgmspfx Adiei General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Nwodjdcdrpjpfx Adioi Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Nwjdpfodffzfsx Adioi Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Nodpfx Asda Ugiodiowi

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Njdpfjt Dv I Ajx Adiewi Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Nsdpshu E Egsfx Adiowi Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray