Beli Oven Pengering Oven Pemanas Oven Inkubator bekas (4.902)

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Tahun 2001 Furnace temper Dimensi kerja: 900x2000 mm Ketebalan: 4-19 mm Dimensi keseluruhan: Panjang: 10,50 m Lrjdpfxezmtdms Al Nep Lebar: 2,40 m Tinggi: 2,40 m + Kipas (2,40x2,30x2,40 m) Daya: 107 kW

Kondisi: bekas, cocok untuk pemanasan minyak termo (180 kW) Lredpozkty Nefx Al Nop Suhu pemanggangan maksimal 220-250 °C suhu dapat diatur kecepatan variabel tak terhingga lebar jalur 600 mm Tutup dengan perangkat pengangkat elektrik cocok untuk injeksi uap (pemanasan, hasil produk) 400V-50 Hz-42A Dimensi (P x L x T): ± 10.000 x 2.000 x 2.700 mm waktu pemanggangan min.: 4 menit waktu pemanggangan maks.: 60 menit

Kondisi: bekas, FlowCook sepenuhnya terbuat dari baja tahan karat cocok untuk pemanasan dengan oli termo (300 kW) panjang sabuk ±13.000 mm Lrsdpezht Hqjfx Al Nsp lebar sabuk ±600 mm sabuk keluaran sistem pencucian sabuk alat pengangkat elektrik untuk penutup tekanan uap: 4–8 bar dimensi keseluruhan (P x L x T): ±15.000 x 2.200 x 3.000 mm

Kondisi: bekas, de-listing-GrantQBD1-Digital-Dry-Block-Heater Ljdexv Dawspfx Al Nerp

Kondisi: bekas, de Ledpfx Aexv Dvlel Njrp

Kondisi: sangat baik (bekas), Binder Model: Binder CB 210 CO₂ / 9140-0013 Technical Data Temperature range: 7 °C above ambient temperature up to 60 °C MB1 controller for temperature and CO₂ concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications excepted!) Lsdpfx Alezgbtcj Norp If you have any further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Oven udara panas spiral dua drum langsung dari pabrik McD yang sudah tutup, sebelumnya digunakan untuk pra-memasak burger dan nugget. Mesin ini dirancang untuk memasak, memanggang, dan mengukus berbagai produk dalam kapasitas besar; tingkat kematangan, pemanggangan, atau pengukusan ditentukan oleh suhu udara, kecepatan udara, kelembapan udara, dan durasi produk berada di dalam sistem. Pemanas elektrik. Sabuk 96 m x 600 mm. Digunakan dari tahun 2007 hingga 2016 saat kontrak berpindah ke pabrik lain. Mesin dalam kondisi sangat baik, kami juga memiliki semua peralatan lain yang digunakan di pabrik – mesin pembentuk, penggorengan, mesin pelapis, filter, spiral freezer, lini pengemasan, dll. Harap diperhatikan, foto kemungkinan menunjukkan dua oven berbeda, keduanya sangat mirip. Ledpfx Alox Altfs Nsrp

Kondisi: sangat baik (bekas), GEA FlowCook 8000/600. Panjang pemasakan 8 meter, lebar 600 mm. Kondisi sangat baik, sangat jarang digunakan. Pemanas listrik, daya 283 kW. Lsdpfxjx Ili He Al Norp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Doppel-Trommel-Spiral-Heißluftofen direkt aus geschlossenem Werk, wurde zuvor zum Vor-Garen von Burgern und Nuggets eingesetzt. Diese Maschinen sind für das Hochleistungsgaren, -grillen und -dämpfen einer Vielzahl von Produkten konzipiert. Der Gar-, Grill- oder Dämpfungsgrad wird durch Lufttemperatur, Luftgeschwindigkeit, Luftfeuchtigkeit sowie die Verweilzeit des Produkts im System bestimmt. Lsdpfx Ajmrrwfsl Nsrp Elektrisch beheizt. Bandmaß: 96 m x 600 mm. Im Einsatz von 2007 bis 2016, anschließend aufgrund eines ausgelaufenen Vertrags abgebaut. Die Maschine befindet sich in sehr gutem Zustand. Zusätzlich bieten wir sämtliches weiteres Equipment aus der Produktion wie Former, Fritteusen, Überzugsmaschinen, Filter, Spiralfroster, Abfüll- und Verpackungslinien usw. an. Bitte beachten Sie, dass die Fotos wahrscheinlich zwei verschiedene Öfen zeigen; beide sind jedoch nahezu identisch.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang total: 1.100 mm, lebar total: 865 mm, tinggi total: 1.800 mm, Tersertifikasi DGUV hingga: 07/2027, Ladenbackofen_Unox_Bakertop_6 Lsdpfx Aeygc Ucel Nsrp

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, jenis arus masuk: AC (pendingin udara), Tersertifikasi DGUV hingga: 07/2027, Ladenbackofen_Unox_Bakerlux_Stefania_001 Lredpfx Ajyaf D Hol Nop

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, unox-bakertop-x10-hu Lsdpfxoyaf Dmj Al Nsrp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, Used high-temperature chamber furnace Lrsdpfx Alohwwltj Nop - Tmax 1280°C - Capacity: 5,000 liters - Internal dimensions (W x D x H): 1,250 x 1,250 x 3,200 mm - External dimensions (W x D x H): 1,600 x 2,200 x 4,000 mm - Net weight: 7,000 kg - Rated power: 198 kW - Documentation available Inspection by appointment possible at any time. Furnace, furnaces, hardening furnace, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, chamber furnace, chamber dryer

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, jenis arus masuk: AC (pendingin udara), Tersertifikasi DGUV hingga: 07/2027, unox-bakerlux-3-shop-pro-touch Lredpfsxmrkxex Al Nsp

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, Tersertifikasi DGUV hingga: 06/2027, neubackofen-unox-bakerlux-4master-2024 Lodpfx Asxduwcel Norp

Kondisi: baru, XPLAN adalah hasil dari hampir 50 tahun pengalaman Incoplan dalam menyediakan metode pengeringan kayu yang sangat efisien dan hemat energi, di seluruh dunia, dalam segala kondisi iklim. Dibandingkan dengan sistem pertukaran udara konvensional, pengeringan kondensasi menggunakan XPLAN membutuhkan sekitar - 60% energi listrik. Ini adalah metode pengeringan yang lembut, sangat cocok untuk kayu keras maupun lunak, sehingga karakteristik aslinya tetap terjaga. XPLAN tersedia dalam 3 versi: LITE hingga 10 m3 STANDARD dengan kipas tambahan untuk struktur terowongan PRO hingga 20 m3 kayu. Buat atau beli struktur sendiri, tempatkan dan pasang XPLAN, dan mulai proses pengeringan Anda. Kami menyediakan desain lengkap untuk ruang pengeringan yang ideal, saran material, dan segala informasi yang Anda perlukan. Pada gambar Anda dapat menemukan ketiga versi, beserta saran struktur ruang pengeringan buatan sendiri dan dindingnya. Panel listrik selalu termasuk dan terhubung ke mesin. Perangkat lunak otomatis, touchscreen, dan berisi beberapa program pengeringan yang sudah dimuat. SPESIFIKASI DATA TEKNIS KOMPRESOR DAYA NOMINAL 1,5 kW BERAT PENGIRIMAN 154 kg PEMANAS TAMBAHAN 4 kW MOTOR BLOWER INTERNAL Motor 0,25 kW; aliran udara 3.060 m³/jam KEMAMPUAN HEAT TREATMENT Ya, hingga 71° C (hanya dengan Heat booster) FAN SIRKULASI 2 unit: kipas 400 mm, 0,25 kW, 3.060 m³/jam masing-masing KEBUTUHAN DAYA 5,8 kW (28A) - 400 V 50 Hz (1-fase) DIMENSI (T X P X L) 94 × 83 × 52 cm (satuan utama saja) Lsdpfx Aew Ug Atjl Nsrp 1 sistem power vent termasuk (termasuk saluran buang dan masuk) WAKTU PENGERINGAN Pinus hijau 25mm - dari 80% ke 8% dalam ± 12 hari. Oak hijau 25mm - dari 65% ke 8% dalam ± 35 hari. KAPASITAS MUAT Untuk kayu lunak dan kayu keras cepat kering (Pinus atau Poplar) 3-5 m3 Untuk kayu keras lambat kering (Oak) 10 m3 TINGKAT PENGURANGAN AIR NOMINAL 114 kg per 24 jam - 5 l/jam

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2009, jam operasional: 2.000 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 870420, Oven sirkulasi dengan pemanas listrik. Kontrol rusak. Tawaran perbaikan disertakan. Panel kontrol harus diperbaiki dan seal diganti. Dimensi: Lebar 2700 x Panjang 2500 x Tinggi 1200 mm Ruang kerja 7,4 m3 Ruang uap 10 m3 Ledpfxoxnx E Se Al Norp Daya pemanas 180 kW Temperatur maksimum 600°C – Aliran volume maksimum 5000 m3/jam Oven ini juga dilengkapi trolley lantai tarik dan pintu lebar yang dapat dibagi dua. Oven jarang dipakai. Sekarang oven sudah dibongkar dan disimpan.

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang total: 860 mm, lebar total: 800 mm, tinggi total: 500 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, BARU +++ BARU Oven Toko Unox Bakerlux 4 BARU +++ BARU Oven konveksi untuk 4 loyang 600 x 400 mm Konstruksi baja tahan karat dengan kaca depan Pintu buka manual, kontrol program Lrodpfx Aexci U Tsl Nop Rentang suhu dapat diatur dari 50 - 260°C Koneksi 400V, steker CEE 16A Dimensi: 800 x 811/860 x 500 mm, P x L x T Oven BARU dengan garansi + layanan suku cadang Kualitas dari spesialis! Manfaatkan lebih dari 35 tahun pengalaman! Opsi: Loyang oven 600x400 Loyang aluminium berlubang 600x400 Filter air Kontrak pemeliharaan Layanan pengiriman Box suku cadang Paket layanan Pelatihan & commissioning Kunjungi pameran oven terbesar kami!

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, BARU ++ BARU Oven Konveksi Unox Speed Compact BARU ++ BARU Unox Oven Cepat & Memasak & Memanggang Kontrol/Tampilan Sentuh Dengan ADAPTIVE Cooking & SPEED Plus 384 program memanggang & 10 program favorit dapat disimpan Kapasitas loyang 300 x 300 mm Suhu dari +30°C hingga 280°C Aliran oven-microwave-convection Ukuran: 424 x 669 x 616 mm (LxPxT) Koneksi 220-240V, steker Schuko Unit baru Dengan garansi dan layanan suku cadang Kualitas dari perusahaan spesialis! Manfaatkan pengalaman lebih dari 35 tahun! Opsi: Loyang khusus Loyang Spees.Bake Semprotan tangan Quick.Rinse Lrjdpfx Ajxckakjl Nsp Speed Marks Koneksi Ethernet DDC.App Pembersih Spray & Rinse Kontrak perawatan Layanan pengiriman Pelatihan & commissioning Kunjungi ruang pamer oven besar kami!

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 Ljdpfx Alovz Hhxs Norp The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm Lodpfxsvz Hq Tj Al Njrp - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. Lrjdpevz Hqgefx Al Nop These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Lrjdpfxovz Hqmj Al Nsp The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm Lrsdpfx Asvz Hqtol Nep - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² Lrodpovz Hqysfx Al Njp - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.