Beli Südhof Mesin Pengikat Tepi bekas (78.325)

Kondisi: bekas, nomor mesin/kendaraan: 008494, de-001 Itjdpjzbxznjfx Amnok

Kondisi: baik (bekas), Tahun pembuatan: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped workpieces. Year of manufacture: 2002. Suitable for curved elements. Good condition, available for inspection! Optionally, the HFF08 radius milling unit can also be purchased. Itedpfxsvx D Aue Amnok

Tahun pembuatan: 1995, Kondisi: belum diuji (bekas), Connected load 380V 55A Itjdponxkm Eofx Amnjk PMS control system Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush milling unit 1962 Profile milling unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Contour milling unit 1983 Buffing unit 1941 Extraction connections 1x160 mm, 1x125 mm Compressed air connection 6 bar

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed Iedpfovz E Tmex Amnotk - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: bekas, nomor mesin/kendaraan: 008244, de-edge-type-001 Itsdpfx Amox Swgfenek

Kondisi: bekas, nomor mesin/kendaraan: 008350, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem perekat: PUR, udara panas Pemotongan alur sambungan: ya Unit multifungsi: ya Kecepatan umpan maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Itsdpfox A Tgyjx Amnek Unit kerja: 7 unit

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Itjdpfevz E Evox Amnok Weight: 800 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min. / max. edge thickness: 0.4 - 3 mm - Min. / max. edge height: 15 - 48 mm - Min. / max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA (diamond-tipped) jointing cutter heads for pre-joining before gluing, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counterclockwise) - End trimming saw unit for front and rear edge overhang. High precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit to improve edge grip, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tiltable and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Sound enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 3750, Fungsionalitas: berfungsi sepenuhnya, The machine applies glue to solid wood up to 18.0 mm thick as well as coil material up to 3.0 mm. It trims coil material (PVC, ABS) up to 3.0 mm thick and real wood edging up to 2.0 mm. Flush trimming of up to 18 mm. Corner rounding and chamfering milling stations. Total length: 3.20 m Isdpfx Amsigad Esnstk Power consumption: 7.1 kW Glue pot End trimming shears Stepless feed speed Cross-cut saw for front and rear edges Flush trimming unit Corner rounding unit Chassis/mobile base Extraction port: 100 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Edge thickness: 0.2 – 12 mm Workpiece thickness: 8 – 52 mm Itedpfx Ajlc Ewiomnok Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing cutter unit: 2 x 1.5 kW, servo-controlled End trimming unit: 2 x 0.3 kW Flush trimming unit: 2 x 0.7 kW, single-sided tracing Fine trimming unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine radius trimming unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatic feed Surface scraper unit, with fine-adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spray unit (2 x separating agent, 1 x sliding agent, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 – 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Kondisi: bekas, nomor mesin/kendaraan: 006603, Jenis sisi yang terpasang: sisi tipis, sisi tebal, kayu solid Sistem perekat: EVA Penyambungan milling: ya Itedpjyngz Aefx Amnsk Unit multifungsi: ya Kecepatan makan maksimum: 14 m/menit Ketebalan panel maksimum: 60 mm Unit kerja: 8 buah

Kondisi: bekas, nomor mesin/kendaraan: 008125, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: EVA, udara panas Pra-fre milling: ya Agregat multifungsi: ya Kecepatan maju maksimum: 18 m/menit Itedpfx Asw Tivmsmnsk Unit kerja: 7 unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, diameter rol: 830 mm, Pembongkaran direncanakan untuk minggu ke-35. Hingga saat itu, pembeli dapat memeriksa fasilitas tersebut saat beroperasi di Lituania. Lini pelapis tepi otomatis penuh dengan mesin-mesin berikut: HOMAG PROFI KAL330/9/A3/WZ (tahun pembuatan 2013) HOMAG PROFI KAL370/8/A3/WZ (tahun pembuatan 2016) Meja pengumpan HOMAG PROFI TBL100/20/30/F (tahun pembuatan 2013) Sistem transfer – konveyor melintang HOMAG POWER TWL410/25/LQ (tahun pembuatan 2016) RINCIAN TEKNIS Mesin pelapis tepi HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Lebar benda kerja tanpa tepi, dengan ketebalan benda kerja 12–22 mm: minimal 60 mm (tergantung pada panjang benda kerja) Lebar benda kerja tanpa tepi, dengan ketebalan benda kerja 23–60 mm: minimal 100 mm (tergantung pada panjang benda kerja) Tumpang tindih benda kerja: 30 mm Ketebalan benda kerja: 12–60 mm Tinggi tepi: maksimal ketebalan benda kerja + 4 mm Ketebalan bahan tepi pada gulungan: 0,3–3 mm Tinggi bahan tepi PVC: maksimal 135 mm Tinggi bahan tepi veneer: maksimal 100 mm Diameter gulungan: maksimal 830 mm Meja pengumpan HOMAG PROFI TBL100/20/30/F Diameter rol: 54 mm Jarak antar rol: sekitar 60 mm Panjang papan: 240–2.500 mm Lebar papan: 120–3.000 mm Sistem transfer – konveyor melintang HOMAG POWER TWL410/25/LQ Diameter rol: 64 mm Jarak antar rol: 110 mm Panjang papan: 240–2.500 mm Lebar papan: minimal 240 mm Ketebalan papan: 8–60 mm Berat papan: maksimal 80 kg PERALATAN Unit pemotongan dan penyambungan dengan jarak bebas pada kedua mesin pelapis tepi Unit perekat A3 dasar pada kedua mesin pelapis tepi Unit pemrosesan dengan jarak bebas pada kedua mesin pelapis tepi Unit penyelesaian akhir FA11 pada HOMAG PROFI KAL330 Unit penyelesaian akhir FA21 pada HOMAG PROFI KAL370 Sisi penghenti tetap di sisi kiri pada meja pengumpan Rol penggerak pada meja pengumpan Ban konveyor samping pada meja pengumpan Ijdpeztazfefx Amnotk Perangkat pelindung melintang yang dikendalikan secara elektropneumatik pada meja pengumpan Perangkat pelindung masuk yang dapat disesuaikan secara manual melalui penghitung Set untuk komponen kecil Meja bantalan udara terintegrasi Sisi penghenti tetap di sisi kiri pada bagian masuk dan keluar dari sistem transfer – konveyor melintang Jalur rol masuk dengan ban konveyor dan konveyor melintang Ban konveyor melintang yang dikendalikan pada bagian masuk Jalur rol keluar Ban konveyor melintang yang dikendalikan pada bagian keluar Perangkat pelindung penghenti yang dikendalikan secara elektropneumatik Ban konveyor samping Tumpang tindih papan yang dapat disesuaikan secara manual

Kondisi: bekas, 1 Itodpfx Ajwtfvkemnek

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, OTT PACIFIC bekas dan berfungsi dijual! Panjang mesin: 6,30 m! Isdpjxc Hhkefx Amnotk

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming) Itodpfxji Am U Do Amnok

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2650 x 640 x 1400 mm Weight: 700 kg Total power requirement: 5 kW Edge banding machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min Itjdpsvz E T Hjfx Amnjk - Control panel at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Gluepot with Teflon coating for hot-melt adhesive granules - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic guillotine for edge banding - Pneumatic cylinder for workpiece separation - End trimming unit for front and rear edge overhangs. Highly precise linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from above, below and laterally, for rounding pre-milled PVC edges - Buffing unit for finishing edges, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, height adjustable - Total connected load: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound-insulating enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Kondisi: bekas, Tahun pembuatan: 1988, Used, good condition Manufacturer: Brandt Type: F10 + EK 11 - End Capper Year of manufacture: 1988 Machine No.: 0-260-01-2188 / 0-260-01-2746 Required space approx. 1100 mm x 1100 mm x 1700 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without overhaul, without warranty or guarantee Isdpevwf Txofx Amnotk

Kondisi: bekas, Tahun pembuatan: 2008, Daya terpasang: 15 kW Kecepatan pengumpanan: 14 (11) m/menit Ketebalan benda kerja: 8 - 60 mm Ketebalan tepi: 0,4 - 8 mm Pemisahan rol: maks. 3,0 x 45 / 0,8 x 65 mm Diameter ekstraksi: 120 / 160 / 100 mm Tinggi kerja: 950 mm Dimensi: 6260 x 1560 x 2300 mm Berat: sekitar 3000 kg Lokasi penyimpanan: pemasok Isdpfx Asy Ruzqjmnjtk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-261-20-4583, de Itsdpfoh Ak D Usx Amnjk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Mesin Pelapis Tepi Holzher 1417 Iodpfx Amsuaqh Uenetk Ketebalan pelapis: 8 mm Kecepatan pengumpanan: 11 m/menit Pembuatan alur dengan pahat DIA Tipe 1961 Unit pemotong 1918 Unit pembuat alur rata 1823 Unit multifungsi 1942 Unit pahat serut 1929 R2 Unit pembuat alur dengan mengikuti pola 1983 Unit pahat serut untuk permukaan 1964 Unit penghalus 1944 K Kondisi telah diperiksa dan berfungsi dengan baik Tahun pembuatan: 2000 Harga: 12.000

Kondisi: bekas, nomor mesin/kendaraan: 006042, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem lem: EVA Edge join milling: ya Unit multifungsi: ya Unit milling atas: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 40 mm Itedpfswacqlox Amnjk Unit kerja: 9 unit

Kondisi: bekas, nomor mesin/kendaraan: 008660, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: EVA Pembuatan alur sambungan: ya Unit multifungsi: ya Unit pemotong tepi atas: ya Isdpfszmmt Uox Amnjtk Kecepatan penggerak maksimum: 30 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 9 unit

Kondisi: baru, Tahun pembuatan: 2026, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Ijdpshqadcsfx Amnotk Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: bekas, nomor mesin/kendaraan: 007913, typ-der-angebrachten-kante Itedpfxowkf Dve Amnok

Kondisi: baru, Tahun pembuatan: 2026, edgebander-specs Itjdjhymgdepfx Amnjk