Beli Chroma Batteriepack-Tester Tabel Uji bekas (3.275)

Kondisi: sangat baik (bekas), RMS Tipe: SW 3509 + Amplifier TGD 6000-000.00 dan Kipas Sistem Pengujian Getaran Elektrodinamik RMS Data Teknis: Sinus: 7,5 kN Nwodpfx Amohylymo Aof Kebisingan: 6,7 kN Kejut: 13 kN Perpindahan pk-pk: 25,4 mm Kecepatan: Sinus 1,5 m/s Kebisingan 2,5 m/s Kejut 2,5 m/s Percepatan: 100 g Pendinginan: Pendingin udara Berat total sekitar 4000 kg Kondisi: bekas / used Cakupan pengiriman: (lihat gambar) (Perubahan dan kesalahan pada data teknis dapat terjadi!) Pertanyaan lebih lanjut dapat kami jawab melalui telepon.

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang pelat: 630 mm, lebar pelat: 630 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mewajibkan pengambilan tepat waktu, baik antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! RINCIAN TEKNIS Dimensi pelat: 630 mm x 630 mm RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 630 x 630 x 950 mm Berat: 150 kg Referensi eksternal: Pieper - Lot 75 Njdjyn H Hljpfx Am Ajwf

Kondisi: bekas, en-de-001 Nwsdpeyfhdmsfx Am Asf

Kondisi: bekas, Tahun pembuatan: 2018, Rated power: 7.7 MW Maximum power: 8.47 MW Rated speed: 1,150 rpm Maximum speed: 2,200 rpm Nwjdpsrr Ammofx Am Aof Rated torque: 63,940 Nm Maximum torque: 70,330 Nm 8 MW gearbox test bench, closed circuit

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, II. ALAT UNTUK UJI TEGANGAN PADA KACA TEMPERED TIPE JF-1 (GLASS SURFACE STRESS METER TIPE JF-1). Nsdpfx Amsw T Rq Se Aswf Alat JF-1 digunakan untuk menguji kualitas tempering kaca melalui pengukuran tegangan permukaan kaca tempered secara non-invasif. Paket lengkap meliputi: layar PDA, kepala optik, adaptor daya, sensor UV, cairan refraksi, kabel USB, standar acuan, perangkat lunak, dan buku petunjuk penggunaan. Tambahan: cairan refraksi 50 ml. Kondisi: bekas, berfungsi baik.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Cost-effective single-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN User-friendly Windows software for universal test procedures; simple tests can also be performed without a PC. Made in Germany Standard configuration: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optionally available: • Comprehensive grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special versions according to customer specification • Extensometer / displacement transducers: Clip-on and long-travel extensometers • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable Nedpfxed H S Hij Am Ajwf • Commissioning and training

Tahun pembuatan: 2025, Kondisi: baru, Cost-effective single-column microprocessor-controlled universal testing machine for tensile, compression, and flexure tests up to 5 kN User-friendly Windows software for universal testing procedures; simple tests can also be performed without a PC. Made in Germany Standard equipment: • Machine with sensor (selectable between 50 N and 5 kN) • Accuracy class 0.5 • Windows basic software • 2-year warranty Options available: • Extensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Custom designs per customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber • Windows software PM-Soft-Smart Nedpfxed H S Rrj Am Ajwf for universal application, freely programmable • Commissioning and training

Tahun pembuatan: 2025, Kondisi: baru, Cost-effective two-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 10kN Convenient Windows software for versatile testing procedures; simple tests can also be performed without a PC. Made in Germany Standard equipment: • Machine with sensor (selectable from 50N to 10kN) • Accuracy class 0.5 • Windows basic software • 2-year warranty Optional accessories: Nwedsd H S R Uspfx Am Ajf • Comprehensive grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special versions according to customer specifications • Extensometers: Clip-on and long-travel units • Temperature and climate chamber • PM-Soft-Smart software for universal use, freely programmable • Commissioning and training

Kondisi: bekas, Espec Model: TSD-100 100-liter usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: Nodjxugq Aepfx Am Ajwf 1. Functional test and replacement of necessary components 2. Re-filling with legally compliant refrigerant as required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications may be subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0325, gaya penekanan: 40 t, Tryout Press – Manufacturer Calende – 40 t For sale is a tool tryout press from Calende with a maximum pressing force of 40 t. The machine is equipped with a bolster and ram plate, each measuring 1,320 × 600 mm, a maximum working height of 700 mm, and is particularly suitable for tool tuning, assembly, and tryout work in tool and mold making. ==== Technical Specifications + Information: Tryout Press Calende – Tryout Press ==== General Information - Manufacturer: Calende - Model: Tryout Press - Design: Tool Tryout Press - Press force: 40 t - Machine weight: approx. 3.5 t - Dimensions (L × W × H): 2,065 × 700 × 2,905 mm ==== Working Area - Pass-through width: 1,000 mm - Max. working height: 700 mm - Stroke: 400 mm - Table height above floor: approx. 750 mm ==== Table and Ram - Table plate: 1,320 × 600 mm - Ram plate: 1,320 × 600 mm - Column diameter: 100 mm ==== Forces - Return force: 4 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Fast return speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 8 kW Nwjdpfofxykwox Am Aef - Oil tank: 200 l - Electric oil cooling: 1.5 kW ==== Options - Hydraulic unit and tank mounted on top of the press: €2,400 - Surrounding maintenance platform: €3,600 - Siemens S7-1200 control: €4,600 - Floor tray made of painted steel: €850 ===== Tool tuning, tryout, tool assembly, mold making, toolmaking, press tool inspection, tryout operations. Tryout press, Tryout Press, Tool Tuning Press, Tool Try Out Press, Tryout Press, Tryout Press, Tool Testing Press, Hydraulic Press Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in compliance with German machinery guidelines, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with all points of the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength lies in special purpose machine construction and press automation. We offer custom-tailored hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SN 552000000, GH Mesin Pengerasan Mesin Pengerasan 9 Nomor Seri: 55200000 Tahun Pembuatan: 1999 Daya: 65 kW Daya generator: 50 kW Nwjdpfx Amsx Eyqme Aof Tegangan generator: 400 V Frekuensi: 100–200 kHz Diameter rol: 12–29 mm Kontrol: Sinumerik 840D Pengumpanan komponen Sabuk konveyor untuk pengeluaran komponen

Kondisi: bekas, Tahun pembuatan: 1991, prueba1 Nwjdpfovut D Tjx Am Ajf

Kondisi: bekas, Table length 1000 mm Nwsdpfx Amsgrndio Ajf Table width 1000 mm Table load capacity / t Weight 1100 kg Table height 100 mm 1000mm x 1000mm x 100mm The clamping plate with T-slots comes from a Scharmann Solon 4 CNC machining center. The price is valid for one plate.

Kondisi: sangat baik (bekas), en: CTS type CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7m³ Temperature & Humidity Testing -60–120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. A professional walk-in climate and temperature testing chamber for industry, research, and quality assurance. This system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from –60 °C to +120 °C - Climate testing with 10–95 % relative humidity - Programmable temperature and humidity cycles - Endurance tests - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Especially suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance tests The air circulation system ensures highly uniform temperature distribution throughout the entire 7 m³ test space. Technical Data: Temperature –60 °C to +120 °C Rate of change approx. 2 K/min Humidity 10–95 % rH Dew point range +5 °C to +89 °C Refrigerant R404A/R23 Max. permissible pressure: 25 bar III.6 Short User Guide Size Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: Nwodpfxeylxaxj Am Asf approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power Supply / Connection 400 V, 3/N, 50 Hz Nominal power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see photos) (Subject to technical modifications and errors. All data provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Professional, mechanical analog hardness tester for measuring metal hardness according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power supply – ideal for quick on-site measurements, production, or quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Hardness Tester • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power • Clear analog measuring scale — Set includes: • Hardness tester • Carrying case • Operating manual in German • Complete set of adapters and sleeves (as shown in the set) Nwedpfxovbwzij Am Ajf Condition: like new / old stock Equipment unused or only tested a few times – no signs of wear.

Kondisi: sangat baik (bekas), CTS Model: CTS CW+40/7/7 Walk-in Climate Test Chamber CTS Walk-in Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate temperature test cell CTS CW+40/7/7 in industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles can be run. The high air circulation ensures an even distribution of climate conditions inside the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions (entire system): Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Nwsdpfsylmamjx Am Ajf Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heater Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 110 t, Hidrobrasil Die Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm For sale is a hydraulic die spotting press from Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a rotatable and tiltable table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it ideal for spotting, adjustment, and tryout operations in tooling and mold making. ==== Technical Data & Information: Hidrobrasil Die Spotting Press – Tryout Press – 110 t ==== General Information - Manufacturer: Hidrobrasil - Model: Die Spotting Press - Design: Tryout Press / Die Spotting Press - Pressing force: 110 t - Machine weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm ==== Working Area - Maximum open height: 1,300 mm - Stroke: 800 mm ==== Table System - Table size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Holder - Ram rotatable: up to 180° ==== Speeds - Downward speed: 1–10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Hydraulic system: Bosch Rexroth ==== Controls and Electrical Nwedpfxjv N D Nce Am Aof - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ==== Spotting operations, tool adjustment, tool tryout, mold making, tool making, tryout work, adjustment processes, flexible tool machining Hydraulic press, die spotting press, tool tryout press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength is in special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, gaya penekanan: 110 t, Die Übersetzung ins Englische für eine professionelle, technische Plattform wie Machineseeker könnte wie folgt lauten: --- Spotting Press – Manufacturer: Hidralmac – 110 t Try-Out Press – Table 1,200 × 1,000 mm For sale is a high-performance spotting press from Hidralmac with a pressing force of 110 t. The machine features a swiveling and traversable table, a large stroke of 1,150 mm, as well as high rapid traverse speeds, making it especially suitable for spotting, adjustment, and try-out work in tool and mold making. ==== Technical Data & Information: Spotting Press Hidralmac – 110 t Try-Out Press == General Specifications - Manufacturer: Hidralmac - Model: Spotting Press - Design: Try-Out / Spotting Press - Pressing force: 110 t - Machine weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm == Working Area - Stroke: max. 1,150 mm - Table stroke: 1,200 mm == Table System - Table size: 1,200 × 1,000 mm - Swivel table: up to 45° - Max. table load: 12 t - Table traverse speed: 25 mm/s - Table swivel speed: 10 mm/s == Forces - Return force: 11 t == Speeds - Working speed: 0 – 10 mm/s (adjustable) - Return speed: 130 mm/s - Rapid traverse: 195 mm/s Nwodpfx Amed Ap Ugo Ajf == Hydraulics - Drive power: 23 kW - Oil tank: 400 l - Recommended oil: DIN HLP / ISO VG 46 == Electrical - Voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz == Equipment - Colour scheme: - Machine body: RAL 7035 (Grey) - Moving parts: RAL 2009 (Orange) - Other components: RAL 7021 (Dark grey) ===== Spotting work, tool adjustment, tool try-out, mould making, toolmaking, try-out work, adjustment processes, large tooling Spotting Press, Tool Try-Out Press, Tryout Press, Tool Adjustment Press, Tool Try-Out Press, Tryout Press, Hydraulic Press Are you looking for a hydraulic press custom-tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which is based on these standards. Our core strength lies in custom machinery engineering and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers. ---

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, For sale: Jenoptik T8000 Wavemove inspection table for casings This device was used, as indicated by the model, for surface inspections of casings and is in good to very good condition. Year of manufacture: 2017 Weight: 2,500 kg The offer includes the components visible in the photos as well as the computer and software. Loading and/or shipping available at an additional cost. All prices plus VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Njdpfxemfty Hs Am Aowf Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 680 mm, lebar meja: 380 mm, tinggi meja: 345 mm,

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Device for scratch testing to characterize the adhesion and scratch resistance of thin coatings and solid materials. The scratch testing procedure involves scoring the surface with a diamond tip under either a constant or progressive load. During the scratch process, the sample is moved under a video system to examine various types of damages caused by the tip and correlate these with the applied load. The images can be digitized and precisely aligned with emission, acoustic, and loading diagrams. This standardized process allows for the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-scratch function (multiple scratches on the same track), friction force measurement, and a 2018 upgrade: new illumination system with analyzer, polarizer, two apertures and filters, as well as high-resolution INFINITY lenses (5X and 20X), plus a lens holder with adjusting screws for easy tip/microscope calibration. Nwedpfx Amsytrufo Aef Including a calibration kit for table speed and applied load sensor.

Kondisi: siap digunakan (bekas), 1 Nedpfx Asytn Hkom Aowf

Kondisi: bekas, de Njdpjyt Idvjfx Am Aswf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 40 t, Tryout press – Manufacturer HIDRALMAC – 40 t – Table 1,000 × 700 mm For sale is a ready-to-use hydraulic tryout press from HIDRALMAC with a pressing force of 40 t. The machine features an extendable, tiltable, and rotatable table, an installation height of 1,200 mm, and a modern monitor-based control system. It is ideally suited for spotting, adjustment, and tryout operations in tool and mould making. ==== Technical Data & Details: Tryout Press HIDRALMAC – 40 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Tryout Press - Type: Tryout press / Spotting press - Pressing force: 40 t - Machine weight: approx. 9 t - Space requirement: approx. 4,000 × 4,400 × 1,800 mm ==== Working Area - Installation height: 1,200 mm - Stroke: 1,050 mm ==== Table System - Table size: 1,000 × 700 mm - Table extendable: 1,050 mm - Table tilt: up to 50° - Table rotation: 180° - Table travel speed: 25 mm/s - Max. table load: 5 t ==== Tool Mounting - Upper tool foldable: up to 180° - Ram plate hydraulically foldable: up to approx. 175° ==== Hydraulics & Drive - Main cylinder: 1 unit - Hydraulics: Bosch Rexroth - Motors: WEG Nwodehtm E Nepfx Am Asf ==== Speeds - Approach speed: 100 mm/s - Return speed: 100 mm/s - Working speed: 0 – 10 mm/s (adjustable) ==== Control - Siemens control with monitor (9") - 200 memory slots - USB interface - Remote function for remote maintenance - Adjustable: pressure, travel, speed - Linear measurement system for position monitoring - Programming of stop and switching points ==== Safety - Light sensors SICK (1,250 mm) - Complete monitoring of the working area ==== Equipment - Operator panel on swing arm - Two-hand operation on a movable stand - Interior lighting - Control cabinet left of the machine - Maintenance balcony with marine ladder - Robust welded construction acc. DIN 8651 - Columns and cylinder made from SAE 1045 (C45), induction-hardened and chrome-plated ==== Scope of Delivery - CE certificate - Operating manual and technical documentation (German) ==== Spotting operations, tool adjustment, tool tryouts, mould making, tool making, tryout processes, adjustment procedures, tool handling Spotting press, tool trial press, tryout press, tool adjustment press, tool try-out press, hydraulic press Looking for a hydraulic press tailored to your specific application? Contact us for an individual offer! Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed both Canadian and European safety requirements, as they also fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our great strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly attractive prices. The hydraulics of our presses predominantly use components from leading European manufacturers.

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 052302303, Bobst Easypress 142, suitable for formats up to 102x142 cm, designed for model making, sample die-cutting, and preparation work for the production machine. Excellent condition, year of manufacture 1997. Nwsdpfx Ajuk I Nxem Asf