Beli Rak Kantilever & Rak Palet Tugas Berat bekas (17.583)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: WG002553, Merek/model: MCWEL M630 (Miller) Output DC terukur: 26,4 kW Arus terukur: 550A Tegangan: 20 – 45V Rentang arus: 55 – 550A Duty cycle terukur: 60% Elektroda yang digunakan: 1,6 – 8,0 mm Model mesin: F3L912 Output mesin: 28 kW / 1800 rpm, 60 Hz Ljdpfxsvznbys Aa Ujrl Sistem pendingin: pendingin udara, kondisi lingkungan Dimensi: P – 1.525 mm x L – 760 mm x T – 1.050 mm Bobot: 900 kg

Kondisi: sangat baik (bekas), Approx. 700 pieces of wire mesh decking for pallet racking, 1.05m deep, resting type - used -: Price per piece ex-works: €55 (net)! Lrjdpfxjrvhu Sj Aa Uel Price for complete lot: €49 (net) per piece! Manufacturer: unknown Model: unknown Year of manufacture: unknown Dimensions: L=1061 mm, W=894 mm Mesh size: 34.2 x 38.1 mm Frame: 40x2 mm Finish: hot-dip galvanized Load capacity: 1500 kg Condition: good – very good Available: immediately Location: Poland

Kondisi: bekas, jarak tempuh: 385.300 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 08/2015, jenis bahan bakar: diesel, berat kosong: 7.550 kg, berat muatan maksimum: 10.450 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/70R22,5 156/- L, konfigurasi gandar: 2 gandar, bahan bakar: diesel, warna: lain, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, suspensi: baja-udara, ukuran ban depan: 315/70R22,5 156/- L, ukuran ban belakang: 315/70R22,5 -/150L, Perlengkapan: ABS, kendali jelajah, pendingin udara, penggerak semua roda, sistem navigasi,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A20300086, Tahun pembuatan: 2010, jam operasional: 17.850 h, kapasitas angkut: 33.000 kg, tinggi angkat: 4.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 4.000 mm, daya: 181 kW (246,09 hp), panjang garpu: 2.500 mm, berat kosong: 45.680 kg, jenis penggerak: Diesel, Heavy Duty Forklift - Diesel Lodpoy T S Tiefx Aa Usrl Chassis Number: A20300086 Load Center: 1200 mm Mast Type: Standard Condition: Refurbished, sold without warranty Technical Condition: Good Front Tire Type: Pneumatic Front Tire Size: 16.00-25 Front Tire Condition: 80 - 100% Rear Tire Type: Pneumatic Rear Tire Size: 16.00-25 Rear Tire Condition: 80 - 100% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing under fair conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Call me, Marco Levermann; I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our specialized forklift workshop is focused on the repair and reconditioning of large machines from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our showroom. Side shifter, 360° rotator = 360° turnable forks Fork quick-change system = quick change system Camera Central lubrication system 3rd valve, 4th valve,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: B20700136, Tahun pembuatan: 2019, jam operasional: 17.060 h, kapasitas angkut: 33.000 kg, tinggi angkat: 4.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 4.000 mm, daya: 185 kW (251,53 hp), panjang garpu: 2.500 mm, berat kosong: 45.680 kg, jenis penggerak: Diesel, Heavy-duty forklift truck – Diesel Chassis Number: B20700136 Load Center: 1200 mm Mast Type: Standard Transmission: Dana TE17000 Condition: Refurbished, without warranty Technical Condition: Good Lrsdpsy T S Tcofx Aa Uel Front Tyre Type: Pneumatic Front Tyre Size: 16.00-25 Front Tyre Condition: 40 - 60% Rear Tyre Type: Pneumatic Rear Tyre Size: 16.00-25 Rear Tyre Condition: 40 - 60% Description: In addition to this MAKE – MODEL, we have approx. 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website – hinrichs-Forklifts. Attractive leasing, hire purchase, and financing options are always available. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Please call me, Marco Levermann, for detailed advice about this MAKE – MODEL. By the way: Our specialist forklift workshop is equipped for the repair and servicing of large machines from 8 tons upwards. We also offer to sell your machine on consignment at our site if required. Side shifter 360° Rotator = 360° turnable forks Fork quick-change system = Quick change system Camera Central greasing system 3rd & 4th hydraulic valve

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), sr001 Ledjy T Ndxspfx Aa Usrl

Kondisi: baik (bekas), Flatbed trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, twin steering axle with turntable, heavy-duty trailer - Heavy-duty transport trolley: Industrial trailer with 2-axle turntable steering - Platform size: 2500 x 1240 x H450 mm - Load capacity: 8 t Ledot U Ttdspfx Aa Usrl - Tyres: 265/160-160, non-marking - Drawbar: detachable, trailer coupling on both sides - Quantity: 1x transport trolley available - Overall dimensions: 4080 x 1240 x H450 mm - Weight: 450 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, kapasitas angkut: 3.000 kg, Trailer tugas berat Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Deskripsi: Trailer tandem - Trailer 2 sumbu HUMBAUR HS 35 37 18 HV - kapasitas muatan 3000 kg - tahun pembuatan 2014 - dengan ramp kuat (mekanis) - sistem lampu 12V - panjang area muatan bagian dalam 3,70 m - lebar bagian dalam 1,80 m - kondisi bagus Lsdpjy Tgb Iefx Aa Ujrl

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jam operasional: 9 h, kapasitas angkut: 16.000 kg, tinggi angkat: 4.000 mm, pengangkatan bebas: 1.480 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 3.030 mm, daya: 128 kW (174,03 hp), lebar kerangka garpu: 2.450 mm, panjang garpu: 2.400 mm, berat kosong: 1.930 kg, panjang total: 4.830 mm, jenis penggerak: Diesel, lebar konstruksi: 2.450 mm, schwerlaststapler-diesel Ledpfx Aaey Tzqwo Uerl

Kondisi: baik (bekas), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, lightweight alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders Lrjdpjhmc A Ajfx Aa Uol -Hydraulic cylinder: lifting cylinder BVS 277 -Stroke: 200 mm -Piston: Ø 110 mm -Quantity: 3 cylinders available -Price: per unit -Dimensions: Ø 160 x 380 mm -Weight: 26.3 kg/unit.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – New item - : Lredpfx Aajf Tv T Nj Uel Price ex works including loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional uprights (or by varying the axle spacing). This example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Uprights: IPE 180 Single-sided uprights approx. 3,700 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Including longitudinal and diagonal bracing, c/c spacing = 1,300 mm, standard is 1.30 m – unless otherwise specified, we will supply the rack with a 1.30 m axle spacing. Other spacings available, e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or custom sizes! Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Supplied complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 2016, 134 unit, pelindung samping / pelindung rangka / pelindung tabrakan / pembatas untuk rak palet, baris tunggal dan ganda, Nedcon – bekas –: Harga ex lokasi: 95,- € / unit (netto), dibongkar, dikemas, dan dimuat! Pabrikan: Nedcon Tipe: Set pelindung samping sigma 135° Tahun produksi: 2016 / 2019 Tipe 1 (untuk baris tunggal): 6 unit tersedia Pelindung samping sigma 135°, L=1100mm Set pelindung samping sigma 135°, L=1100 Lrjdpfsy Aixusx Aa Usl Panjang: 120cm Tinggi: 40cm Kedalaman: sekitar 22cm Berat: sekitar 31kg Harga baru sekitar 205,- € (netto) / unit Tipe 2 (untuk baris ganda): 124 unit tersedia Pelindung samping sigma 135°, L=2400mm Set pelindung samping sigma 135°, L=2400 Panjang: 243cm Tinggi: 40cm Kedalaman: sekitar 22cm Berat: sekitar 41kg Harga baru sekitar 227,- € (netto) / unit Kondisi: baik – sangat baik Tersedia: segera Lokasi: Augsburg

Kondisi: baik (bekas), sekitar 1.000 unit rak penyimpanan untuk palet industri, galvanis, kapasitas 1 ton, dapat ditumpuk hingga 4 tingkat – bekas: Lsdpfoyzc Awsx Aa Usrl Harga per unit ex lokasi: hanya €75 (netto)! Harga per unit untuk pembelian minimal 100 unit: hanya €65 (netto), ex lokasi: Produsen: Reimuth GmbH Tipe: Abu-abu Tahun pembuatan: 1992 Tinggi: sekitar 1,90 m Satu rak terdiri dari dua bagian rangka (masing-masing berbentuk "L") yang dirakit menjadi satu rak untuk palet industri. Tanpa baut, hanya menggunakan engsel. Beban kerja yang diizinkan: 1 ton Beban tumpukan yang diizinkan: 4 ton Dapat ditumpuk hingga maksimal 4 tingkat Galvanis panas Dijual tanpa palet industri Kondisi: bagus Tersedia: segera Lokasi: 73079 Süßen

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized – New – : Price: €1,485 (net, ex works) Transport within Germany (excluding islands) €430 (net) Ljdpfx Asd Epfvja Uorl Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (as well as setting different pitch distances); this sample configuration with 4 frames is simply the most common solution! A hot-dip galvanized cantilever racking system, comprising: German brand manufacturer, new equipment Description: - Single-sided upright 2,600 mm high, hot-dip galvanized - Base and arm depth 1000 mm - Each with 3 height-adjustable racking arms - Load capacity at 500 mm load center - 600 kg per arm / 1,800 kg per upright With 4 uprights per level: 4 x 600 kg = 2,400 kg Profiles: Uprights: IPE 140, Arms: IPE 80 With longitudinal and diagonal bracing, pitch = 1300 mm, standard is 1.30m – unless otherwise specified, we will supply the racking with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, for a small additional charge also 1.50m or custom dimensions! Standard delivery length for a row with 4 uprights is approx. 4,000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations available (frame heights, arm lengths, arm types, etc.)! Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 2013, Rak palet, Hofe, tinggi rangka sekitar 3,50 m hingga 4 m, panjang travers: 2,70 m, - bekas - : Harga (netto) ex lokasi: hanya 950 sudah dibongkar, dikemas, dan dimuat: Produsen: Hofe Tipe: SL 25 / RTS 110 Tahun pembuatan: 2013 Tinggi rangka: sekitar 3,50 m hingga 4 m Lebar rangka: sekitar 10 cm Tinggi travers: sekitar 10 cm Penstabil rangka: dibaut Kedalaman rangka: sekitar 1,10 m Jumlah rangka: sekitar 9 unit Beban lapangan: max. 1.600 kg Beban rak: max. 1.440 kg Lebar lapangan: 2,70 m Travers: sekitar 40 unit Termasuk pengaman dorong Kondisi: baik Tersedia: mulai pertengahan November Lokasi: Egelsbach, area FFM Lsdpfx Aaextbfrj Uerl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, paletten-durchlaufregal-feralco-verkauf Lredpfoxdx Dyox Aa Ujl

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection Lredpfxsnwmwvs Aa Usl - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: bekas, ä19526 Lrsdpsyrq Nlsfx Aa Ujl

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Lodpsfivg Sjfx Aa Uorl Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Ljdpfx Aaefivg Rj Uerl

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Ledsxbz Ddjpfx Aa Uerl Set components: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. Ledpfx Aaofivhfj Uorl - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! Lrodpfx Aasfivhgj Uel You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 2019, Warehouse building consisting of cantilever and pallet racks, manufacturer OHRA, footprint approx. 867 m² – used - : Ljdpfoyk H Risx Aa Ujrl Price ex location: €99,500 (net), for self-disassembly! Disassembly service available for an additional charge upon request. Material to close one gable end is also available at extra cost! Manufacturer: OHRA Year of construction: 2019, sheet metal 2021 Building dimensions: Width: approx. 17.35 m Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one of the long sides of the building will be open (currently where it adjoins the existing hall) Cantilever rack: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Upright load per side: 4,200 kg Axis spacing: 2 m Arms are bolted on Arms with anti-roll-off device, system for securing loads Including pallet beams Ground level plus 3 arm levels per side Total depth: 2.70 m (2x 1.20 m + 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet rack: Manufacturer: OHRA P3 pallet racking system Year: 2019 Bay width: 2,900 mm, four bays at 2.40 m length Load per level: 2,000 kg Load per bay: 6,000 kg Top edge 1st level (buckling length): 800 mm 1 row with 17 frames, 1 row with 19 frames (at two locations with pipes) Total number of frames: 36 Rack length: approx. 48.10 m Frame depth: 1.10 m Frame width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (bearing surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pieces at 2.90 m, approx. 24 pieces at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Wind zone: 1 / terrain category 0.48 kN/m² Available: immediately Condition: good, slight rust on some outer frames and faded paint Location: Hockenheim area Drawings available as PDF, itemized list, structural analysis. The sideloader shown in the pictures is also for sale for an additional charge (recently fitted with a nearly new battery, cost approx. €9,600 (net)).

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! Lrjdpfxeddmpvj Aa Uol A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!