Beli Rittal Sz 2500.300 bekas (564)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WFDFLT22702018968, berat kosong: 4.000 kg, berat muatan maksimum: 23.000 kg, berat keseluruhan: 27.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 02/2016, panjang ruang muatan: 13.650 mm, lebar ruang muat: 2.480 mm, panjang total: 13.850 mm, lebar total: 2.550 mm, suspensi: udara, ukuran ban: 385/55 R19,5", warna: merah,

Kondisi: bekas, jarak tempuh: 830.000 km, daya: 350 kW (475,87 hp), pendaftaran pertama: 06/2015, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2015, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi, * Mercedes 1848 Arocs Tractor Unit * First registration: 2015 * 830,000 km Bodpfoy N H Uajx Afpodg * Euro 6 * Automatic transmission * Steel leaf spring / Air suspension * 4 x 4 HAD * Engine brake * Automatic climate control * Alloy wheels * Navigation system * Lane departure warning system * Wheelbase: 3.60 m * Unladen weight: 8,078 kg * Schwarzmüller Tipper Semi-Trailer * First registration: 2014 * Air suspension * Lift axle * Alloy wheels * SAF axles * Sliding tarpaulin * Unladen weight: 5,700 kg Special Equipment: Audio-Navigation System Bluetooth Comfort, 220 Ah Battery, CB radio, Aluminium air reservoir, 2 air horns on cab roof, Electrical pre-installation in cab 24V / 100 A, Cab with air suspension, 12-speed gearbox - Type: G 230-12, Electric lifting roof, Rear axle ring gear 300, Information display 10.4 cm with additional readout, Integral rear panel, Automatic climate control, Cooling box / fridge, Alloy wheels 11.75x22.5 (ALCOA Dura-Bright, front axle), Alloy wheels 9.00x22.5 (ALCOA Dura-Bright), Air intake behind cab, Illuminated Mercedes star, Mounting plate / fifth-wheel plate 40 mm for fifth wheel coupling, Reinforced engine brake, PTO MB 131-2c, Frame lowering without residual air pressure regulation, Low-maintenance fifth wheel coupling, Drawers under side skirt, Circuit breaker, Cab seats: passenger seat with armrest, Cab seats: comfort driver's air suspension seat, Exterior sun visor, Side window roller blind, Driver's door, Voltage converter 24V / 12V 10 A, 12V socket in front passenger footwell, Additional 12V socket, 24V / 25A socket in passenger footwell, Carpet on engine tunnel, Cab door extension, Preparation / switch for lift axle on trailer, Additional heater (water-based), Transmission oil cooler Further Equipment: Emission standard: EURO 6, Switchable ABS, Axle configuration: 4x2, Front axle load: 7.5 t, Trailer socket 24V / 15-pin, Working lights, Arocs, Exhaust pipe to vehicle center, Electrically adjustable and heated exterior mirrors, Rear axle differential lock, Compressed air connection in cab, Medium compressed air unit, Cab width: 2.30 m, Movable cab entry, Hydraulic tilting cab, Cab: L ClassicSpace, Cab floor with 170 mm engine tunnel, Suspension: leaf / air, Suspension: front springs 7.5 t, 3-leaf, Electric windows, Tinted windscreen, 100 A alternator, 12-speed gearbox - Type: G 281-12, AdBlue (urea) tank: 60 L, Hydraulic Auxiliary Drive (HAD), Body: tractor unit, Body variant: Standard, Lower comfort bunk, Comfort central locking system, 3-piece mudguards, Fuel tank: 290 L steel, left side, Non-regulated steering pump, Air intake from front, 2-stage air compressor, Heated air dryer, Engine 12.8 L - 350 kW inline 6-cylinder diesel (OM 471), Engine compartment encapsulation, Wheelbase 3,600 mm, Ramp mirror, Residual heat utilisation, Partly shielded disc brakes, Disc brakes front and rear axles, Seat cover/upholstery: fabric, Cab seats: functional co-driver seat, Front axle stabilizer, 24V cab socket, Tachograph / EC control device, Toll collection pre-installation, Straight front axle, Perm. gross weight 18,000 kg

Kondisi: bekas, jarak tempuh: 352.000 km, daya: 380 kW (516,66 hp), pendaftaran pertama: 02/2021, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 02/2027, rem: retarder, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2021, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baik (bekas), Tahun pembuatan: 2021, nomor mesin/kendaraan: 22112P114, Offer 24107 Technical Specifications: - Unused pump station in like-new condition - Pump manufacturer: DELIMON, model FZ-B, 3.75 ccm/m - Flow rate: 7.6 cm³/min Bdsdpfx Astyli Njfpjg - Pressure capacity up to 200 bar - Lubrication unit level indicator - Thermostat - Fan - Electrical connection: 400 V - Installed in RITTAL control cabinet with hinged lid and two wing doors - Required space: approx. W 1100 x H 1100 x D 500 mm - Weight: approx. 100 kg

Kondisi: bekas, Tahun pembuatan: 2009, CNC control, operator panel, computer monitor, display, TFT industrial monitor Bdjdpfxjtp Rf Es Afpsg - Operator panel: operating terminal control panel incl. PC command panel - Monitor: Flatman type FK170SBRGD001 - Control cabinet cooling unit: Rittal type SK 3302100 - Individual components: see photos - Overall dimensions: 550/600/H870 mm - Weight: 52 kg

Tahun pembuatan: 2026, Kondisi: baru, Condensation drying of air and, indirectly, of food products (such as fruit, tea, mushrooms, and similar items) is the most energy-efficient method for removing water from various materials. It operates on the heat pump principle – by cooling down to vapor temperature, the temperature drops below the dew point, causing the surface of the condenser to collect moisture from the air. The heat extracted from the air is immediately returned to the same air, and with the aid of the electrical energy required to run the compressor, an additional 20-30% heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) Bdedod Atipspfx Afpjg - Digital control - Automatic ventilation - Fitted with stainless steel mesh trays Technical specifications: - Rated capacity: 25–50 kg per batch - Power consumption: 0.6 kW, 230 V - Temperature range: 40–60°C - Material: stainless steel, Wnr. 1.4301, AISI 304 - Dimensions: 710 x 800 x 2000 mm - Weight: 100 kg - Trays: 11 pieces (570 x 570 mm) - Drying surface: approx. 3.6 m² - Continuous airflow - Insulation: 70 mm polyurethane - Closed condensate system, condensate drainage - Minimal maintenance Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Kondisi: bekas, jarak tempuh: 899.000 km, daya: 315 kW (428,28 hp), pendaftaran pertama: 11/2014, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 10/2024, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2014, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), Special equipment: Driver's side airbag, audio system: CD radio (Bluetooth), compressed air connection in cab, aluminium air tank, air horn, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Brake Assist (Active Brake Assist 3), driver assistance system: Lane Keeping Assist, cab with air suspension, suspension: front leaf springs 7.5 t, 2-leaf, Fleetboard vehicle computer, tinted windscreen, info display 12.7 cm with additional display, interior filter for construction vehicles, alloy wheels 11.75x22.5 (ALCOA matt, on front axle), alloy wheels 9.00x22.5 (ALCOA matt), mounting plate / 40 mm fifth wheel plate for fifth wheel coupling, reinforced engine brake, PTO MB 131-2c, frame lowering without bag residual pressure control, tyre pressure monitoring system, retarder, circuit-breaker, cab seats: driver's comfort suspension seat, external sun visor, side window sun blind driver's door, 12V socket in passenger footwell, 24V / 25A socket in passenger footwell, lift axle prep/switch for semitrailer/trailer, Fleetboard preparation, preparation for cool box / refrigerator, gearbox oil cooler Bedpfxevhzffj Afpsdg Further equipment: EURO 6 emission standard, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust to right outside, exterior mirrors electrically adjustable and heated, rear axle differential lock, medium air compressor unit, cab width 2.30 m, cab: L StreamSpace, cab floor with 320 mm engine tunnel, suspension: leaf/air, front spring bracket aluminium, electric window lifters, 100A alternator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, rear axle crown wheel 440, body/type: tractor unit, comfort bunk below, central locking system, communication interface, 3-piece fender, radiator grille, regulated steering assistance pump, 2-stage air compressor, engine 10.7 ltr - 315 kW R6 diesel (OM 470), engine compartment encapsulation, kerb mirror, residual heat utilisation, disc brakes front and rear axle, seat upholstery: fabric, cab seats: functional co-driver's seat, cab seats: driver's seatback foldable, voltage converter 24V/12V 10A, front splash guard, front stabilizer, left external storage compartment, 24V cab socket, tachograph / EC control device, cab door extension, aerodynamically shaped underbody panelling, front underrun protection, preparation for CB radio, preparation for toll recording, dropped front axle, regulated water pump, permissible gross weight 18.00 t, auxiliary heater (water)

Kondisi: baru, berat kosong: 875 kg, berat muatan maksimum: 1.525 kg, berat keseluruhan: 2.400 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 3.440 mm, lebar ruang muat: 1.710 mm, tinggi ruang muatan: 2.360 mm, volume ruang muat: 13,9 m³, warna: hitam, tinggi konstruksi: 2.880 mm, lebar kerja: 2.240 mm,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 54710003, Adast Domináns 547 No.: 54710003 4 warna Bodpfx Afounrq Uepsdg alkohol meja bar penyemprot B/3

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Bjdpfx Ajcdtpljfpsdg Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Bjdpfx Afjfz Dt Nopsdg This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Bjdpfx Afjfz Dubepsdg Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Bsdpfxefz Nb Ts Afpodg The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well. Bdsdpfx Ajfz U S Eefpjg

Tahun pembuatan: 1995, Kondisi: sangat baik (bekas), Blum Metapress ZMM 3320 Boxpress - Metabox Year: 1995 S/N: AA77 Bdedpfxefgrgro Afpsg Runner length: min. 270 mm, max. 650 mm Body width: min. 300 mm, max. 1200 mm Bottom panel thickness: min. 13 mm, max. 16 mm Pneumatic press, horizontal and vertical For BLUM Metabox systems Machine dimensions (LxWxH): approx. 2000 x 1200 x 2000 mm In very good condition Weight: 700 kg

Kondisi: baru, Tahun pembuatan: 2026, panjang kontainer: 12 kaki, berat keseluruhan: 5 kg, Perlengkapan: air panas, kamar mandi, pencahayaan, pendingin udara, shower, EN-Commercial pavilion container – insulated office/living unit – NEW Description: For sale: a commercial container pavilion, insulated office/lounge kiosk, status: “New”. All photos and design are original and may not be copied. Construction: - Made of high-quality sandwich panels - External dimensions: 12 x 4 m - Internal height: 2.40 m (slope height: 2.30 m) Specifications: • Walls: sandwich panels • Floor: 100 mm PIR sandwich panel (thermal transmittance 0.22 W/m²K), plus OSB board and PVC wood effect flooring Bdsdpfefu Sw Hox Afpsg • Gabled roof: 100 mm EPS sandwich panel (thermal exchange 0.22 W/m²K) • Sheet metal exterior and decorative finish in anthracite Windows & Doors: • Windows: Fixed (non-opening), dimensions 900 x 2000 mm, qty: 2 • Door: Aluminum with glass, size 980 x 2100 mm, qty: 1 Electrical installation: • 2 single sockets • 2 double sockets • 1 double light switch • Fuse box Ventilation: dimensions on request For EU VAT-registered companies: VAT not applicable Optional equipment: • Toilet with WC and washbasin • Air conditioning with heating function and remote control • Other options available on request WE CAN PRODUCE THE PAVILION IN VARIOUS COLOR CONFIGURATIONS. WE CAN MANUFACTURE PAVILIONS OF ANY SIZE. Examples: - 5 x 2.5 m - 5 x 3 m - 6 x 2.5 m - 6 x 3 m - 7 x 2.5 m - 7 x 3 m Custom interior layouts are available. For further information or a tailored offer, please contact us.

Kondisi: baru, Bernardo HV 80 OSZI Edge Belt Sander Worktable: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Bjdpfx Afod Tb U Sspjdg Abrasive belt back panel: 950 x 200 mm Sanding unit lockable: 90° / 0° Belt speed: 16 m/sec Additional table: 300 x 250 mm Extraction port: Ø100 mm Roller diameter: 110 mm Motor output (continuous duty S1 100%): 1.5 kW (2.0 HP) Motor input (intermittent duty S6 40%): 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight approx.: 148 kg

Kondisi: baru, Tahun pembuatan: 2026, Weima single-shaft shredder type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connected load: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Bdedpfx Aoh Eiw Ijfpeg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V-rotor (patented) with profile-milled knife pockets - Gear end switch - Pressure strip - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Kondisi: baru, Tahun pembuatan: 2026, en-001 Bdsdpfx Aoh Hnp Defpsg

Kondisi: baru, Tahun pembuatan: 2026, Machine for processing sinks made from materials such as sintered quartz, granite, granite composites, ceramics, etc. Technical specifications: CNC ROUTER 1325 PRO+ WORKING AREA 1300X2500MM Z-AXIS RANGE 700MM - PRO OMRON HIGH-SPEED AC SERVO DRIVES (COMPLETE WITH PLANETARY GEARS), 1.5KW, ETHERCAT Bsdpjualqqsfx Afpjdg INTELLIGENT ENERGY RECOVERY INDUSTRIAL REAL-TIME CONTROL SYSTEM OSAI OPENSMART, CYCLE TIME UNDER 2MS, SUPPORTS UP TO 16 AXES, ETHERCAT COMMUNICATION WITH CONTROL CABINET AUTOMATIC GANTRY ANGLE CALIBRATION EUCHNER HBA-103037 HANDHELD MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRALIZED SKF GREASE LUBRICATION PNEUMATIC BEAM PRESSURE SYSTEM SINK CLAMPING SYSTEM EXTRACTION CHANNELS BALL SCREW COVER ON Z-AXIS BLOWING SYSTEM FOR MOVING COMPONENTS VACUUM SENSOR SYSTEM SET OF DOUBLE SCRAPERS #router #CNC #millingmachine #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: sangat baik (bekas), jarak tempuh: 421.830 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 04/2018, jenis bahan bakar: diesel, konfigurasi gandar: 6x4, jarak roda: 3.350 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 500 l, rem: retarder, warna: hitam, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2018, Perlengkapan: ABS, filter jelaga, kendali jelajah, kulkas, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, retarder, sistem navigasi, spion elektrik, spoiler,

Kondisi: sangat baik (bekas), jarak tempuh: 337.227 km, pendaftaran pertama: 06/2020, jenis bahan bakar: diesel, konfigurasi gandar: 6x4, jarak roda: 3.350 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 600 l, rem: pengereman mesin, warna: beige, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, Tahun pembuatan: 2020, Perlengkapan: ABS, AdBlue, filter jelaga, kendali jelajah, kulkas, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: baru, berat keseluruhan: 49.500 kg, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026,

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: PO3503522, Overband magnet with very high performance Total length = 3610 +0/-100 mm | Magnets = 1600+800 mm Total width = 2240 mm | Belt = 1600 mm | Scraper = 1500 mm Height = 1120 mm Weight = approx. 8000 kg Bdedpfx Ajivdg Dofpjg Electro lifting magnet 10 kW, enclosed, oil-cooled Belt drive SEW, 5.5 kW Belt speed 1.35 m/s

Kondisi: bekas, jarak tempuh: 1.001 km, pendaftaran pertama: 01/2010, warna: hijau, kabin pengemudi: lain, tipe perpindahan gigi: lain, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 900 mm, Tahun pembuatan: 2010,