Beli Toshiba Btd13F-R22 bekas (186)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled Rodpeuxfu Nefx Aa Isw MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, lebar total: 2.400 mm, Lamina Gluer to ręczna, liniowa składarko-sklejarka oraz maszyna do aplikacji taśmy, z ręcznym podawaniem arkusza. Dzięki innowacyjnej konstrukcji obsługuje różne formaty oraz materiały. Bez narzędziowe przezbrojenie umożliwia szybką zmianę konfiguracji nawet dla krótkich serii. Opcje maszyny obejmują aplikator kleju na zimno, jednostkę podparcia tylnego, stanowisko robocze, aplikator taśmy itp. Lamina Gluer to prostoliniowa składarko-sklejarka zbudowana na solidnej ramie z profili aluminiowych anodowanych. Maszyna standardowo umożliwia ręczne podawanie, opcjonalnie wyposażona może być w automatyczny podajnik dla materiałów sztancowanych, bigowanych i nacinanych. Operator pozycjonuje wykroje, a podczas przejścia przez maszynę jednostka kleju na gorąco aplikuje spoiwo. Długość i precyzyjna pozycja linii kleju są łatwo ustawiane za pomocą sterownika PLC z ekranem dotykowym. System rolek dociskowych zapewnia idealne przyleganie i prowadzi sklejone detale na łatwo regulowaną szufladę odbiorczą. Maszynę wyposażono w regulowane i wymienne prowadnice boczne, które umożliwiają również klejenie opakowań z dwóch elementów. Lamina Gluer dostarczana jest gotowa do podłączenia elektrycznego i pneumatycznego. Stanowisko robocze Lamina Working Station to opcja dla maszyny Lamina Gluer. Produkt przechodzi przez sklejarkę, która nakłada zaprogramowane linie kleju, i trafia do stanowiska roboczego, gdzie jest pozycjonowany na taśmach podciśnieniowych. Drugi element jest montowany i pozycjonowany przy użyciu przykładnic bocznych i pneumatycznych ograniczników gwarantujących wysoką jakość wykończenia. Jednostkę można dostosować do różnych produktów – od ekspozytorów jedno- i wieloelementowych, przez opakowania, po duże podparcia tylne, półki itp. Transport Rodpjxwcwwjfx Aa Iow ‍Materiał transportowany jest na czterech taśmach podciśnieniowych, które przesuwają arkusze do listwy zatrzymującej na dalsze operacje. Podciśnienie wytwarzane jest przez wentylator, który kontroluje ułożenie arkuszy, zapewniając łatwą obsługę i idealną rejestrację. W trakcie produkcji operator ma pełny dostęp nad arkuszami do dalszego montażu dzięki systemowi taśm podciśnieniowych. Rolki dociskowe ‍Materiał przechodzi przez dwie rolki dociskowe na końcu maszyny, co zapewnia idealne przyklejenie. Rejestracja ‍Rejestracja wynosi +/- 1 mm i realizowana jest przez układ fotokomórki oraz prowadnic wypychających. Operator korzysta z przykładnicy bocznej, aby ułatwić dokładny montaż na stanowisku.

Kondisi: Pembawa suku cadang rusak (bekas), Fungsionalitas: tidak berfungsi, daya: 20 kW (27,19 hp), jenis bahan bakar: diesel, warna: putih, konfigurasi gandar: 4x4, bahan bakar: diesel, kabin pengemudi: kabin harian, tipe perpindahan gigi: hidrostatik, Tahun pembuatan: 2011, Perlengkapan: penggerak semua roda,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 10, masa garansi: 12 bulan, The item for sale is a new glass storage rack from our own production. The rack features 10 sliding drawers, designed to accommodate glass boxes of up to 2,500 kg (dimensions 160 x 255). The drawers are manually extendable; we also manufacture electronically extendable racks. The number and size of drawers can be customized according to customer specifications. The drawers glide on a flat rail (loading side) to prevent unintentional release. Our technicians are able to install the rack on-site for customers throughout Europe. Rodpfx Aaegd Ilyo Isw

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.800 kg, daya: 22 kW (29,91 hp), Data teknis: Daya: 22 kW Redpfx Aaoxnznvj Isw Pisau: 29 buah Dimensi: 1800 × 1840 × 1000 mm Bobot: sekitar 1.800 kg Kondisi: Baru dan belum pernah digunakan Di palet, segera tersedia untuk pengiriman atau pengambilan Lokasi: 86554 Pöttmes

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,39 kW (25,00 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, warna: merah, berat kosong: 2.150 kg, daya angkat: 980 kg/m, tinggi angkat: 2.500 mm, ukuran ban: 31X15,5-15, kondisi ban: 100 persen, kondisi penggerak: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, kelas emisi: Euro 5, lebar bucket penggalian: 1.500 mm, Tahun pembuatan: 2025, bahan bakar: diesel, kapasitas angkut: 980 kg, Perlengkapan: garpu palet, hidrolik, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, penggerak semua roda, sekop standar, en-GB_H&R 2210-B35 Wheel Loader (Wide Track) – Compact Loader with Wide Track for Enhanced Stability Rodpfjrhh Sqox Aa Iow The new 3-cylinder Perkins turbo engine, 18.5 kW (manufactured in Mannheim, Germany), meets Euro 5 standards even without a particulate filter and is particularly efficient. With the 2-stage hydrostatic drive, the compact loader 2210 B35 achieves approximately 16 km/h and provides excellent drivability. Thanks to its large steering angle of 42° and tight turning radius, it is ideally suited for work in confined spaces. The yard loader is supplied as standard with a manually adjustable pallet fork and a standard bucket, enabling immediate operation. The third and fourth hydraulic control circuits allow operation of diverse attachments. The hydraulic quick coupler enables fast and convenient tool changes at the front. With a high lifting capacity, the HR 2210 loader handles heavy loads up to 980 kg and lifts them to a height of 2.53 m. Equipped with wide tyres (31x15.5-15) as standard, the loader offers excellent stability. The E-gear function on the joystick ensures particularly comfortable operation of the HR 2210-B35. At our facility, all H&R loaders are technically and visually optimized and undergo rigorous testing. Each machine also receives comprehensive rust protection treatment. Our loaders are CE-compliant according to EU Machinery Directive. Each machine comes with a TÜV Süd certificate for obtaining an individual operating permit in accordance with §21 StVZO (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for enhanced stability • Extensively optimized in Germany • Includes manually adjustable pallet fork • Includes 150 cm standard bucket • Comfort cabin with heating, ventilation, and radio • Reversing camera with display • Joystick with float position and E-gear • Auxiliary hydraulics for front attachments, 3rd and 4th control circuit • Hydraulic oil cooler • Brake-inch pedal • Trailer hitch for use with trailers • Rotating beacon • LED work lighting front and rear • Wide tyres 31 x 15.5 -15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE-compliant to EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 Gross: €27,304.55 Financing available! Optional 2-year warranty: €590 TÜV road approval/operating permit for work machines: €595 Transport within Germany and Austria available at additional cost Technical Data Engine: 3-cylinder Perkins turbo (25 HP) Lifting capacity: 980 kg Lifting height: 2,530 mm (lower edge of standard pallet fork) Dump height: 1,956 mm (standard bucket tipped) Lifting/lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3,380 x 1,496 x 2,340 mm Weight: 2,160 kg Bucket width: 150 cm Tyres: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,39 kW (25,00 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, warna: merah, berat keseluruhan: 1.980 kg, daya angkat: 900 kg/m, tinggi angkat: 2.530 mm, ukuran ban: 31 X 15,5 -15, konfigurasi gandar: 2 gandar, kelas emisi: Euro 5, lebar bucket penggalian: 1.500 mm, Tahun pembuatan: 2025, bahan bakar: diesel, kapasitas angkut: 950 kg, Perlengkapan: Pemeriksaan keselamatan UVV, garpu palet, hidrolik, kabin, kopling trailer, lampu depan tambahan, penggerak semua roda, sekop standar, en-GB Rsdpfx Aajrgqz Ej Ijw

Kondisi: baru, Tahun pembuatan: 2024, masa garansi: 12 bulan, 6-ACHSEN-SCHWEISSROBOTER MIT ZWEI 2-ACHSEN-SERVOGESTEUERTEN POSITIONIERERN Der KIBOT R2200 ist ein mehrachsiges Schweißrobotersystem mit Armen, die sich in der Horizontalebene bewegen, sowie einer robusten Konstruktion mit Präzisionsführungen. Durch digital servogesteuerte Motoren erreicht er hohe Geschwindigkeit und Genauigkeit. Der gelenkige Zwei-Glied-Arm deckt ohne Totzonen einen 360°-Arbeitsbereich rund um den Roboterfuß ab. Die lineare Vertikalachse gewährleistet eine gleichmäßige Zugänglichkeit an jedem Punkt des Arbeitsbereichs. Der Werkzeugarbeitspunkt (TCP) optimiert die Roboterbewegung auf ein Minimum, um die gewünschte Position effizient zu erreichen. Die einzigartige Kinematik bietet unübertroffene Reichweite und Vielseitigkeit für jegliche Schweißanwendung. Der Schaltschrank (Robotersteuerung) ist platzsparend in die Roboterbasis integriert. Anwendungsbereich Der KIBOT R2200 verfügt über einen zylindrischen Arbeitsbereich mit einem Radius von 2.200 mm durch die zwei Rotationsachsen und einer Vertikalverfahrweg von 1.200 mm durch die Linearachse. Der maximale Arbeitsbereich des TCP beträgt 3.000 mm. Die spezielle Bauweise ermöglicht eine 360°-Reichweite rund um die Basis des Roboters und schafft dadurch mehrere Arbeitszonen. Drei Rotationsachsen zur Rotation und Schwenkung des Schweißbrenners erlauben unbegrenzte Schweißmöglichkeiten aller Nahtarten und Positionen. BEWEGUNGSBEREICHE Maximale Reichweite Achse A1 + A2: 2.200 mm Schwenkbereich A1: ± 180° Rodpfsvxi Hlex Aa Ijw Schwenkbereich A2: ± 160° Vertikaler Hub A3: 1.200 mm Drehbereich um A3: ± 360° Neigewinkel Schweißbrenner: ± 135° Drehbereich um A3: ± 360° MAX. GESCHWINDIGKEIT Drehachsen A1 + A2: 90°/s Lineare Achse A3: 1 m/s Drehachsen A4, A5, A6: 120°/s Max. Bahn-Geschwindigkeit: 2 m/s GENAUIGKEIT Wiederholgenauigkeit: ± 0,20 mm ZWEI 2-ACHSEN-SERVOPOSITIONIERER - Hohe Präzision und minimales Spiel - Präzise Synchronisation zwischen Roboter und Positionierer - Hohe Positioniergenauigkeit und Wiederholbarkeit von Details Anzahl Achsen: 2 Motortyp: AC, Servo Traglast: 500 kg Max. Geschwindigkeit Achse 1 & 2: 60°/s Nominales Drehmoment Achse 1: 1040 Nm Nominales Drehmoment Achse 2: 1040 Nm Wiederholgenauigkeit Achse 1&2: ± 0,01° SCHWEISSTECHNIK Kemppi A7 450A MIG/MAG PULSE Stromquelle ROBOTERSCHWEISSBRENNER UND KOLLISIONSSENSOR Roboterbrenner TRM612W, flüssiggekühlt, 1,6 m Brennerpaket, Kollisionssensor, hohler Handgelenkausgang

Kondisi: diremajakan ulang (bekas), Tumbler vakum dengan pendingin 220 Liter Tipe: MKR 220 Kapasitas wadah: 220 l Jumlah pengisian maksimum: 145 l Pengosongan otomatis Rodex Rzqfepfx Aa Iew Vakum: 0–95 % Sistem pendingin terintegrasi Kontrol proses kerja dengan komputer Daya terpasang: 3,0 kW Tegangan: 400 V, 50 Hz

Kondisi: bekas, Handwheel -Mounting: Ø 22 mm -Pitch: 35 mm -1 graduation: 0.5 mm -Dimensions: Ø 225 x 160 mm Redpfjffypzjx Aa Ijw -Weight: 4.6 kg

Kondisi: bekas, drive dog faceplate, rotating centre turning device Redpfxec Ih Suj Aa Isw - Outer diameter: Ø 220 mm - Taper: Ø 106 mm - Short taper: size 6 - Bolt circle: Ø 133 mm - Weight: 6.4 kg

Kondisi: bekas, Leveling components, leveling units, leveling elements, machine foot, machine feet, leveling pads, machine foundation, leveling pad, wedge pad, machine support, leveling foot, spring elements Redpjfzlv Aofx Aa Isw -Leveling elements: 4 pieces, suitable for machine tools and equipment -Price: for the complete set -Dimensions: Ø 220 x 105 mm -Weight: 5.5 kg each

Kondisi: bekas, Brake disc -Brake discs: Conversion kit -Toothed ring: Ø approx. 34 mm Rjdpfef D H Hiex Aa Ijw -Bolt circle: Ø 80/M10 -Price: complete -Dimensions: Ø 221 x 50 mm -Weight: 3.7 kg/piece

Kondisi: bekas, Variable pulley, Vario adjustable V-belt pulley, Variator pulley, PIV gearbox, variable speed gearbox, variable speed pulley, variable belt pulley, expanding belt pulley, adjustable V-belt pulley -Manufacturer: VEB, variator pulley with compression spring Rsdpfxshmqmrj Aa Isw -Outer pulley diameter: 220 mm -Inner mounting diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.8 kg

Kondisi: bekas, Beam clamp, sheet clamp, plate clamp, girder clamp, sheet metal gripper, material gripper, slab gripper, lifting clamp, lifting clip, lifting clamp, crane clamp, roller clamp Rodeir E Thjpfx Aa Iew -Manufacturer: VEB TAKRAF, Roller Clamp Type WSI -Clamping range: 35-70 mm -Lifting capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Rsdefzlutopfx Aa Iow

Kondisi: bekas, Milling cutter head, milling arbor, solid carbide milling cutter, indexable insert milling cutter, face milling head, milling head, shell-end milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Mounting: Ø 50 mm / bolt circle Ø 67 x 14 mm Rodpfx Aaou Ridle Ijw -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Kondisi: bekas, Cutter head, milling arbor, carbide milling cutter, indexable insert milling cutter, face milling cutter, milling head, screw-on milling cutter, face cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8250-C -Mounting: Ø 60 mm / bolt circle Ø 100 x 18 mm -Quantity: 2x milling heads available -Price: per piece -Dimensions: Ø 260 x 60 mm Rodpfx Aaou Ricue Iow -Weight: 14.1 kg/pc.

Kondisi: bekas, Cutter head, milling arbor, carbide milling cutter, indexable insert milling cutter, face milling cutter, milling head, shell milling cutter, face mill Rodpfju Ridrsx Aa Iow -Manufacturer: Seco, Secodex face mill cutter head -Type: Secodex R220.13/23-8200-C -Mounting: Ø 60 mm / Bolt circle Ø 100 x 18 mm -Indexable inserts: 12 pieces -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

Kondisi: bekas, Cutter head, milling arbor, carbide milling cutter, indexable insert milling cutter, face milling cutter, milling head, arbor-type cutter head, face cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C Rsdpfxsu Ridxe Aa Isw -Taper: SK50 -Dimensions: Ø 330 x 260 mm -Weight: 36 kg

Kondisi: baik (bekas), Metal bellows coupling, jaw coupling, connecting coupling, torsionally flexible coupling - Jaw coupling: Torsionally flexible jaw coupling - Bore: Ø 29 mm - Quantity: 3 couplings available Rodpfx Aajg A I Ebo Ijw - Price: per piece - Dimensions: Ø 225 x 180 mm - Weight: 26.4 kg each

Kondisi: baik (bekas), Tahun pembuatan: 1991, Three-phase electric motor, electric motor -Manufacturer: VEM, Electric Motor Type KPER 225 M2 -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 x 110 mm -Protection class: IP54 -Design: B3 Redjvw Sctjpfx Aa Iew -Dimensions: 770/420/H510 mm -Weight: 286 kg.

Kondisi: bekas, Contactor, semiconductor contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, auxiliary contactor relay, unused, original packaging -Type: DIL ER-22-G -Voltage: 60 VDC Redpsr Im R Hofx Aa Ijw -Quantity: 19 units available -Price: per piece -Carton dimensions: 60/50/H60 mm -Weight: 0.2 kg/unit

Kondisi: sangat baik (bekas), rollenlager_datenblatt_001 Rjdjb A Ip Djpfx Aa Iow

Kondisi: baik (bekas), Contactor, semiconductor contactor, power contactor, capacitor contactor Rodeb A Nqcopfx Aa Isw -Type: DIL ER-22-G -Price: per piece -Quantity: 3 units available -Weight: 0.2 kg per unit