Beli Fritz Werner Durchmeser 180 Mm bekas (83.605)

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 40 t Iodpfoyk Utlex Anketn

Kondisi: seperti baru (mesin pameran), panjang pemakanan sumbu X: 800 mm, lebar perataan: 800 mm, Mesin serut dua sisi. Kondisi kerja sangat baik. Ijdpfxjx Rrykj Ankstn

Kondisi: baru,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, tegangan masuk: 400 V, daya: 2,2 kW (2,99 hp), frekuensi input: 50 Hz, Pengaduk 250 liter dengan poros dan bilah pengaduk Iodpfx Anszun A Hjkstn Mesin ini memiliki 2 motor dengan gigi mundur ×1,1 kW atau total daya 2,2 kW. Karakteristik utama: • Dirancang untuk pencampuran homogen produk makanan; • Terbuat seluruhnya dari baja tahan karat; • Proses pencampuran yang benar-benar senyap; • Dua pengaduk dengan bilah; • 2 katup pembuangan depan baru; • Mudah dibersihkan; • Dilengkapi dua motor gigi senyap kelas tertinggi; • Pelindung dengan sakelar batas; • Dilengkapi komponen listrik. Sebagian di antaranya memiliki tombol kontrol tahan lembap. • Sistem pencampuran balik di kedua arah; • Kapasitas: 250 liter; • Daya instalasi 2,2 kW, 400V, 50Hz;

Kondisi: baru, Data teknis mengenai palang rak palet: Sistem rak: Stow Tipe: Rak Palet NS Paket pengiriman mencakup: 01x Palang rak palet, baru Warna material: RAL 2004 oranye Profil rangka: 160 x 50 mm Tipe palang: PNB0436 Pengait: 4 HK (kait) Lebar bersih: sekitar 3.300 mm Beban maks. per pasangan palang 4.500 kg dengan beban yang terdistribusi secara merata Itodpszlhr Asfx Ankon 02x Pin pengaman, bekas Desain: sepenuhnya dilapisi seng Untuk mengamankan rangka longitudinal agar tidak terangkat secara tidak sengaja Kontak kami di perusahaan: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan langsung. Jika ada permintaan pengiriman tambahan, atau pengiriman produk ini, akan dikenakan biaya tambahan, yang akan ditanyakan secara terpisah tergantung pada lokasi pengiriman atau isi paket pengiriman.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 172 mm, kecepatan rotasi (maks.): 49 rpm, In recent years, over €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Maximum torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Itodpfxjztu Dbe Anken Screw barrel bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw barrels, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not part of the scope of delivery.

Kondisi: bekas, 01x placed shelf grating, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (bearing bar direction) for double rack rows: 2x 1,100 mm Internal depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Bearing bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Itjdpevvhglefx Ankon Note: The grating may show damage, scratches, dents, or welded areas. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply, which can be individually requested from us depending on the delivery location and quantity.

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Category: Twin-screw extruder Number: DE27629 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MC Year: 1998 Throughput: 400 – 800 kg/h Screw diameter: 2 x Ø 50.0 mm L/D ratio: 40:1 Drive motor: 215.0 kW (AC) Itedpfx Anoiw Ibhjkon Suitable materials: PE, PP, PS, ABS // Additional details: Co-rotating, equipped with SIHI vacuum pump for degassing, segmented screws and barrel – Control system: Siemens S7 with visualization This offer does not meet your requirements? Please visit our website Plama or send us your detailed inquiry—we have the right solution for almost any budget.

Kondisi: baru, Technical data for pallet racking beam: Racking system: SSI Schäfer Type: PR600 The delivery scope includes: 01x Pallet racking beam, new Color (material): RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Connector: 5 HK (hooks) Clear span: 2,400 mm 02x Safety pins, new Itedeku A Epepfx Ankjn Version: completely galvanized For securing the crossbeams against unintentional lifting

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Racking system: Link 51 Type: Boltless XL Scope of delivery includes: 01x Pallet Rack Beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load capacity per pair of beams: 900 kg, with evenly distributed load 02x Safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting Further information on the pallet rack beam: The 4 BST beam type is used for placing chipboard panels, steel panels, etc., which then finish +/- flush with the top edge of the rack beams. This avoids a loss in height and, in addition, the front edge of the step beam protects the shelves or inserted segments from damage. Itedpfx Anjkvnm Askjn The beams are not intended for pallet storage, but serve as order picking levels; i.e., storage of cartons, small parts, etc.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Itjdpfx Asmhhf Sjnksn - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Itsdpfx Anemhhl Hskjn Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Iedpfemhh Dtsx Ankjtn - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) Itodpemidyfofx Anksn - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: baik (bekas), Included in the scope of delivery: 01x shelf connector, used Material color: blue Manufacturer: Feralco for rack spacing: approx. 200 mm Total length: approx. 200 mm Iedpsk Iuhfefx Ankstn Profile dimensions: approx. 20 x 20 mm End plate: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 per side) Weight: approx. 0.41 kg | each.

Kondisi: baik (bekas), The scope of delivery includes: 198x Depth Supports, used Material finish: Sendzimir galvanized Isdjlhp Tcjpfx Anketn Total length: approx. 1,110 mm Suitable for frame depth: approx. 1,100 mm Clear support span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Beam support: approx. 50 mm Weight per piece: approx. 3.02 kg Note: The unit price applies only for a minimum order quantity of 198 pcs (1x pallet).

Kondisi: seperti baru (mesin pameran), English Translation: Scope of delivery includes: 01x Upright protector, 2nd choice Material color: yellow Total height: approx. 1,000 mm Total width: approx. 128 mm Internal width: approx. 120 mm Material thickness: approx. 4.00 mm Itsdpfxjlikw He Ankjn Weight: approx. 5.23 kg | per piece Each side: 2 drill holes Ø approx. 11 mm Center-to-center hole distance: approx. 900 mm

Kondisi: baik (bekas), Technical data for pallet rack beam: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: 01x Pallet rack beam, used Material color: orange Beam type: SLB 100|15 Box profile: 100 x 50 mm Connector: 5 HK (hooks) Clear span: 3,000 mm Max. load per beam pair: 2,300 kg, with evenly distributed load Compartment load valid only when used in combination with frame profile 90|20 02x Safety pins, used Version: fully galvanized Itedpfx Anslkc Erskjn For securing the cross beams against unintentional lifting

Kondisi: baik (bekas), Technical data for pallet racking beam: Racking system: META (Thyssen) Scope of delivery includes: 01x Pallet racking beam, used Material color: orange Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 4 HK (hooks) Clear span: 3,300 mm 02x Locking pins, used Isdpfx Aslnbp Esnkotn Design: fully galvanized For securing the beams against unintentional lifting

Kondisi: baik (bekas), Dimension: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical specifications for the workbench frame: Manufacturer: Jung Heinrich Type: T Scope of delivery includes: 02x Workbench uprights, used Material colour: blue Upright height: 1,000 mm Upright depth: 1,100 mm Upright profile: 100 x 65 mm Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (welded truss construction) 02x Workbench beams, used Material colour: yellow Box profile: 120 x 50 mm Beam type: HN 120|25 Clear span: 2,700 mm 04x Safety pins, used Design: fully galvanised 01x Chipboard panel, second grade, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Itsdpfx Aolnfi Rsnkon Panels may consist of two parts 08x Self-drilling screws, new Design: galvanised Dimensions: 6.3 x 70 mm Images are for illustrative purposes only. Actual material colour may vary. - The workbenches are picked and shipped unassembled; - The workbench uprights are pre-assembled; - Standard production time is approx. 3 - 5 working days.

Kondisi: baik (bekas), Included in delivery: 01x Depth crossbeam, used Rack system: SSI Schäfer Material color: blue Total length: approx. 1,060 mm For frame depth: approx. 1,050 mm Ijdpfelq Ewwox Anketn Clear support width: approx. 928 mm Profile dimensions: U 50 x 50 mm Beam support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg The depth crossbeam is suitable for the following beam profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm IPE: 100 x 55 mm INP: 120 x 60 mm Box profile widths: - 40 mm - 50 mm - 60 mm General information about the item: This item is offered for pickup only. Transport or shipping beyond pickup is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Kondisi: baru, Technical specifications for pallet rack beam: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x pallet rack beam, new Material colour: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Ijdpfx Aelwkwdenkotn Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x safety pins, new Version: fully galvanised For securing the load beams against unintentional lifting

Kondisi: baik (bekas), Included in the scope of delivery: 01x Pressure Grating, used Material finish: hot-dip galvanized Total depth: 990 mm (bearing bar direction) Total width: 1,195 mm (cross bar direction) Bearing bar dimension: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | pc. Internal reference: L Note: - The frame edges have been bent inward on all sides. - The gratings may show signs of wear, such as damage, scratches, dents, welded spots, etc. Itjdpfx Ajnbfhajnkon General information about the item: This item is only available for collection. Should transportation or shipping of this item be required, it will incur additional costs, which can be individually requested from us depending on the place of delivery or scope of delivery.

Kondisi: baik (bekas), Included in the scope of delivery: 01x Drop-in shelf grid, used Material color: hot-dip galvanized Total depth: 1,175 mm (bearing bar orientation) Clear support width: 1,097 mm Total width: 890 mm (cross bar orientation) Iodenh Rb Nspfx Ankstn Bearing bar dimensions: 50/1.80 mm Frame height: 50 mm Beam support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14.11 kg | unit Internal designation: GR-17 Note: - The grating shelves may show damage, scratches, dents, or weld marks. - Despite the 40 mm beam support, the drop-in shelf grids are suitable for a rack depth of 1,200 mm. General information about the item: This item is only offered for collection. If transport or shipping of this item is required, additional charges will apply depending on the delivery location and scope of delivery. Please contact us for details.

Kondisi: baik (bekas), Technical data for rack connector: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x Rack connector, used for rack spacing: 250 mm Overall length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Borehole diameter: 11 mm Weight: 0.330 kg | each 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the article: This item is only available for collection. Any requested transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on the delivery location and scope. Itjdpfxsmqk Svj Ankon