Beli Krauss Maffei Km 350-1900 C2 bekas (17.328)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: - screw diameter: 50 mm - check valve, open nozzle - nozzle radius: 10 mm - nozzle orifice: 4 mm Technical Specifications Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN - Movable platen force: - opening: 44.8 kN - closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar clearance (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ Ledpfex Thzpox Al Nsrp - Shot weight (PS): 357 g - Screw speed (std/opt): 390 / 490 rpm Electrical and Hydraulic Equipment - Rated pump motor power: 22 kW - Installed heating capacity: 10.97 kW - Number of barrel heating zones: 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions & Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Lsdpfx Alsx Avhyo Norp Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Lredpfx Aljw U Rcdj Nep Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, tekanan injeksi: 1.795 batang, langkah pembukaan: 2.100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 560 kN Movable platen drive force (opening): 89 kN Lrjdpfsyv Acmox Al Njp Movable platen drive force (closing): 92 kN Mounting plate (H x V): 1,600 x 1,550 mm Clear opening (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow: 690 cm³/s Screw rotation speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump drive power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillation elements 1 x air valve Tie bar pulling device 3 x hydraulic core pull (BWAP) 2 x hydraulic core pull (FWAP) 20 x hot runner control zones Robot interface as per Euromap 67

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold Lrjdjud H Dmopfx Al Nsp - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Mesin cetak injeksi langsung dari produsen! Kami sebagai produsen KraussMaffei menawarkan mesin stok kami yang telah diperiksa dan fleksibel: Seri CX yang sepenuhnya hidraulik menawarkan mesin dua pelat yang sangat ringkas, efisien, dan fleksibel. Desain dua pelat yang sangat ringkas dengan sistem penguncian yang menopang sendiri menawarkan ruang yang luas untuk peralatan periferal dan aksesibilitas yang sangat baik. Manajemen energi yang efisien dan cerdas dengan penggerak servo BluePower juga memberikan dasar yang kuat untuk tuntutan tertinggi dan solusi yang tepat untuk setiap aplikasi. DATA TEKNIS: KM 80 / 380 CX G06 (Pesanan 38655610) SISTEM KONTROL  MC 6 dengan layar warna TFT 21,5" dengan fungsi multitouch UNIT PENGUNCI  Gaya penguncian kN 800  Gaya pembukaan cetakan, maks kN 55  Jarak bebas (t x v) mm 470 x 420  Pelat pemasangan (t x v) mm 670 x 670  Tinggi pemasangan cetakan min. - maks. mm 400 (ditingkatkan 150 mm)  Jarak pembukaan mm 900 (ditingkatkan 150 mm)  Langkah pembukaan cetakan maks. mm 500  Penggerak ejektor hidraulik  Langkah ejektor mm 150  Gaya ejektor maju/mundur kN 22,6 / 9,8  Kecepatan ejektor maju/mundur mm/s 760 / 800  Berat cetakan maks. kg 1000 UNIT CETAK INJEKSI  Diameter/Jenis sekrup mm 30 / Standar (dapat disesuaikan) Ledpfx Aloud N Hds Norp  Rasio Ls/D efektif 26,7  Tekanan cetak injeksi bar 2500  Volume langkah cm³ 113  Berat cetakan pada langkah maks. untuk PS g 103  Kecepatan injeksi mm/s 100  Aliran injeksi cm³/s 71  Penggerak/kecepatan sekrup 1/menit 295  Aliran plastifikasi (Standar) g/s 12,3  Gaya sistem nozel kN 50 PARAMETER ELEKTRIK Daya koneksi kW 15,0  Daya pemanas terpasang kW 10,9  Catu daya V / Hz 380 / 50 3 Fase dengan kabel netral BERAT DAN DIMENSI  Berat bersih dengan kabinet kontrol ton 3,55  Panjang x Lebar x Tinggi m 3,96 x 1,48 x 2,02 PERALATAN TAMBAHAN  Plastifikasi tahan aus  Isolasi penuh BluePower untuk silinder plastifikasi  Nozel terbuka  1 titik kontrol suhu tambahan untuk pemanas nozel  Katup udara 1 – arah (BWAP)  Pengontrol pneumatik untuk penutup saluran panas 1 - arah  Penggerak inti hidraulik 1 - arah (BWAP)  Antarmuka Euromap untuk penanganan E18, E63  Antarmuka Euromap (komputer pusat) E67, E77  Kontrol Proses Adaptif (APC)  Rangkaian cetak injeksi  Paket analisis grafis Mesin ini tersedia di pabrik kami di Parsdorf dan dapat dikirim dalam waktu singkat. Pilihan tambahan lainnya dapat ditawarkan sesuai permintaan. Kami menantikan permintaan Anda.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! Lrsdpfx Aljuggb Ds Nep As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor Ljdow U N Ixspfx Al Nsrp WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Lodpfxeuiykde Al Norp

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Two injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei KM 50 C1 - Year of manufacture: 1999 - Injection unit: SP220 - Screw diameter: 30 mm - L/D ratio: 23 - Injection pressure: 2500 bar Lredpfow Emybjx Al Nep - Shot volume: 85 cm³ - Machine dimensions (LxWxH): approx. 3200 mm / 1350 mm / 1800 mm - Weight: approx. 2500 kg - Control system: MC4 - Operating hours: approx. 86,000 h 2) Krauss Maffei KM 125 C1 - Year of manufacture: 2000 - Injection unit: SP520 - Screw diameter: 45 mm - L/D ratio: 20 - Injection pressure: 1878 bar - Shot volume: 217 cm³ - Machine dimensions (LxWxH): approx. 4500 mm / 1550 mm / 2200 mm - Weight: approx. 5500 kg - Control system: MC4 - Operating hours: approx. 82,000 h Documentation is available. On-site inspection possible.

Kondisi: bekas, Tahun pembuatan: 2006, Mesin injection moulding Krauss Maffei KM 800-4300 MX, tahun 2006 Lsdpfsw Hwr Djx Al Nerp Mesin dilengkapi sebagai berikut: - 5 kontrol kaskade hidrolik - Unit injeksi dengan 90 - Sistem kontrol MT5 - Sistem penanganan Krauss Maffei - 2 sabuk konveyor

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Lrsdpfxow Hwthj Al Njp

Kondisi: bekas, Tahun pembuatan: 1999, Mesin injeksi plastik Krauss-Maffei 800/5700MC tahun produksi 1999 untuk dijual. Data teknis tersedia berdasarkan permintaan. Lrjdpfxsyg Hbgj Al Njp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Lodpfx Ajub S R Hol Nerp Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Injection unit: Screw diameter: 50 mm Lrodsydp D Eepfx Al Nsp L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration/isolation elements - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Mounting plate (H x V): 1600 x 1600 mm Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Ledpfxsyb Sx Ho Al Nsrp Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Cylinder heater control zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control Ljdpjx Hzzcofx Al Norp - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 105 mm, jarak antara tiang: 1.400 mm, volume langkah: 4.546 cm³, tekanan injeksi: 1.778 batang, berat injeksi: 4.137 g, injection_molding_machine_specs Ledpfxjx Hz I Ne Al Nerp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 58.670 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping plate dimensions (H x V): 820 x 845 mm Clear distance between tie-bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Lodpfx Ajydp Idjl Nsrp Heating zones (cylinder): 5 Oil fill volume: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Anti-vibration mounts - Krauss Maffei robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface to Euromap 67

Kondisi: hampir baru (bekas), berat keseluruhan: 6.400 kg, berat muatan maksimum: 650 kg, kapasitas angkut: 500 kg, Centrífuga reacondicionada de descarga inferior con cesta vertical y rascador sobre placa de inercia Tipo KM 125 fabricada por KRAUSS MAFFEI. Lodpfsrrwdbjx Al Norp Partes en contacto: AISI 316L. Suspensión: centrífuga de tipo rígido sobre placa de inercia. Tapa: con 3 cierres de apertura manual, apertura de la tapa mediante pistón hidráulico (incluye unidad hidráulica de potencia), un visor plano, un visor inclinado, rascador de torta, conexiones para entrada de N2, así como conexiones para tubo de lavado y tubo de carga. Transmisión: motor eléctrico ATEX de 37 kW. Sistemas de seguridad: pistón neumático de seguridad para apertura de la tapa, detector de pistón de seguridad de la tapa, detector de tapa abierta, detector de tacómetro en máquina y motor (incluye caja de conexiones).

Kondisi: baik (bekas), Tahun pembuatan: 2005, gaya penjepit: 27.000 kN, Perlengkapan: dokumentasi / manual, KraussMaffei KM 2700 MX – SP 12000 / Sekrup Ø 120 mm Unit Penutup * Gaya penutup: 27.000 kN / 2.700 t * Gaya pembukaan cetakan: 1.890 kN * Gaya pelat bergerak saat membuka/menutup: 342 / 294 kN * Dimensi pelat: 3.020 × 2.600 mm * Jarak antara kolom (T × V): 2.100 × 1.700 mm * Langkah pembukaan: 3.000 mm * Tinggi cetakan min./maks.: 900 / 2.000 mm * Lebar pembukaan maksimum: 3.900 mm * Langkah pengeluaran: 400 mm * Gaya pengeluaran maju/mundur: 400 / 200 kN Unit Injeksi – SP 12000 Diameter sekrup: 120 mm * Rasio L/D: 23 * Tekanan injeksi maksimum: 1.758 bar * Volume langkah: 6.786 cm³ * Berat tembakan PS: 6.175 g * Laju aliran injeksi: 1.118 cm³/s * Kecepatan sekrup nominal/maks.: 100 / 141 RPM * Kapasitas plastifikasi PS pada kecepatan nominal: 169 g/s * Kapasitas plastifikasi PE pada kecepatan nominal: 131 g/s * Kapasitas plastifikasi PS pada kecepatan maksimum: 239 g/s * Kapasitas plastifikasi PE pada kecepatan maksimum: 184 g/s * Gaya penekanan nozel: 166 kN Peralatan Elektrohidraulik * Daya nominal motor pompa: 132 kW * Daya pemanas terpasang: 84 kW * Zona untuk pemanasan/pengaturan silinder: 7 * Laju siklus kering sesuai Euromap 6: 356 siklus/jam * Waktu siklus kering sesuai Euromap 6: 10,1 s * Volume tangki oli: 2.440 l Ledpfxoznwt Ie Al Nerp Dimensi & Berat * Berat bersih termasuk lemari kontrol: 168 t * Dimensi (P × L × T): 14,73 × 5,03 × 3,74 m * Berat cetakan maksimum: 72.000 kg Dengan penggerak sekrup elektrik * Daya penggerak sekrup: 147 kW * Kecepatan sekrup nominal/maks.: 100 / 158 RPM * Kapasitas plastifikasi PS (nilai nominal): 178 g/s * Kapasitas plastifikasi PE (nilai nominal): 137 g/s * Kapasitas plastifikasi PS maksimum: 267 g/s * Kapasitas plastifikasi PE maksimum: 206 g/s Dengan Akumulator (ZE) Laju aliran injeksi: 1.696 cm³/s Peralatan: 4 inti, hidraulik – pelat bergerak 16 kaskade hidraulik 6 kaskade pneumatik Pengontrol saluran panas: 48 Batang penop yang dapat dilepas Perangkat lunak untuk ekstrusi

Kondisi: baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KraussMaffei KM 1300 MX – SP 8100 / Sekrup Ø 105 mm, Unit Penutup 1. Gaya Penutup: 13.000 kN / 1.300 t 2. Gaya Pembuka Cetakan: 910 kN 3. Gaya pelat bergerak, membuka/menutup: 159 / 153 kN 4. Dimensi pelat: 2.150 × 1.910 mm 5. Jarak antara kolom (T × L): 1.550 × 1.250 mm 6. Langkah pembukaan: 2.350 mm 7. Tinggi cetakan min./maks.: 700 / 1.400 mm 8. Lebar pembukaan maksimum: 3.050 mm 9. Langkah pengeluaran: 350 mm 10. Gaya pengeluaran maju/mundur: 250 / 125 kN 11. Tinggi cetakan opsional yang diperbesar min./maks.: 950 / 1.650 mm 12. Lebar pembukaan pada tinggi cetakan yang ditingkatkan: 3.300 mm Unit Injeksi – SP 8100 Diameter sekrup: 105 mm 1. Rasio L/D: 23 2. Tekanan injeksi maksimum: 1.778 bar 3. Volume langkah: 4.546 cm³ 4. Berat injeksi PS: 4.137 g 5. Laju aliran injeksi: 805 cm³/s 6. Kecepatan sekrup nominal/maks.: 126 / 159 RPM 7. Kapasitas plastifikasi PS pada kecepatan nominal: 147 g/s 8. Laju plastifikasi PE pada kecepatan nominal: 116 g/s 9. Kapasitas plastifikasi PS pada kecepatan maksimum: 187 g/s 10. Kapasitas plastifikasi PE pada kecepatan maksimum: 147 g/s 11. Gaya tekanan nosel: 166 kN Peralatan Elektrohidraulik 1. Daya nominal motor pompa: 110 kW 2. Daya pemanas terpasang: 59 kW 3. Zona pemanas dan pengaturan silinder: 7 4. Laju siklus kering sesuai Euromap 6: 761 siklus/jam 5. Waktu siklus kering sesuai Euromap 6: 4,7 s 6. Kapasitas tangki oli: 1.500 l Dimensi & Berat 1. Berat bersih termasuk lemari kontrol: 77 t 2. Dimensi (P × L × T): 12,09 × 3,66 × 2,67 m 3. Berat cetakan maksimum: 29.000 kg Dengan penggerak sekrup elektrik 1. Daya penggerak sekrup: 117 kW 2. Kecepatan sekrup nominal/maks.: 123 / 193 RPM 3. Kapasitas plastifikasi PS (nilai nominal): 144 g/s 4. Kapasitas plastifikasi PE (nilai nominal): 114 g/s 5. Kapasitas plastifikasi PS maksimum: 226 g/s 6. Kapasitas plastifikasi PE maksimum: 178 g/s Ledpfx Aleznvy Hs Nerp Dengan Akumulator (ZE) 1. Laju aliran injeksi: 1.732 cm³/s Peralatan: 1. Spindel yang dapat dilepas (spindel yang dapat disesuaikan) 2. Euromap 67 untuk robot 3. 48 pengatur saluran panas 4. 8 kaskade pneumatik 5. 6 kaskade hidraulik 6. 2+2 inti Material yang digunakan: PP, PC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Year of manufacture: 2011, Ledstxymmepfx Al Norp Arm reach: 1717 mm, Weight: 20 kg, Controller: DX100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin 3S tipe Krauss Maffei 500-4300 CX ini diproduksi pada tahun 2010. Mesin ini memiliki gaya penguncian sebesar 5000 kN dan berat injeksi maksimum 2084 g, sehingga cocok untuk aplikasi cetak injeksi berkualitas tinggi. Dengan diameter sekrup 90 mm dan tekanan injeksi 1839 bar, mesin ini menawarkan kinerja yang andal. Manfaatkan kesempatan untuk mendapatkan mesin cetak injeksi hidraulik tipe Krauss Maffei 500-4300 CX ini. Hubungi kami untuk detail lebih lanjut. • Unit penjepit • Berat cetakan: DS 3950 kg / AS 5260 kg (total 7900 kg) • Diameter cetakan minimum: 560 mm • Langkah pembukaan: 1170 mm • Tinggi pemasangan cetakan: min. 480 mm; maks. – • Jarak pelat maksimum: 1650 mm • Pelat pemasangan (L × T): 1270 × 1200 mm • Jarak kolom bebas: L 900 mm / T 800 mm • Diameter cincin pemusat: 200 mm • Sistem pengeluaran • Langkah: 250 mm • Gaya pengeluaran: 95,4 kN • Gaya penarikan: 48,6 kN • Sistem pengeluaran pneumatik: ya • Tarik inti / kontrol • Kontrol tarik inti: 2 (AS) + 2 (DS) • Nozel penjepit: 2 hidraulik / 0 pneumatik • Kontrol proses (SPC): ya (Kistler, p=2 / t=0) • Antarmuka printer: tidak / USB 12-port • Kontrol saluran panas: tidak • Unit injeksi 1 • Rasio L/D: 20 • Diameter sekrup: 90 mm • Volume langkah maksimum: 2290 cm³ • Berat injeksi maksimum (PS): 2084 g • Tekanan injeksi: 1839 bar • Kapasitas plastifikasi: 185,8 g/s • Kecepatan sekrup: 270 RPM • Diameter lubang nozel: 6 mm • Daya pompa / daya pemanas: 90 kW / 44 kW • Lain-lain • Beban derek maksimum: 10 ton • Mampu 2 komponen: tidak • Filter nozel/penggiling: tidak • Ini adalah sistem penjepit 2 pelat hidraulik penuh standar dengan penggerak sekrup hidraulik penuh dan motor konstan. • Jam operasi: 60.159 jam Peralatan tambahan Lsdpfeyg Hz Hjx Al Norp • Robot linier: KRC6-2 ARC-C • Sumbu: X/Y (Standar), Z tersedia • 69.880 jam • Termasuk sistem penanganan Wittmann • Opsional: unit kedua dari tahun 2010 tersedia, tanpa sistem penanganan Wittmann: 60.150 jam

Tahun pembuatan: 2013, jam operasional: 42.681 h, Kondisi: siap digunakan (bekas), produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2013. Krauss Maffei 35-180 CX ini memiliki ukuran plastifikasi 180 dan diameter ulir 28 mm. Dengan 3 unit yang tersedia, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 35-180 CX ini. Hubungi kami untuk informasi lebih lanjut. Lrodpfx Aloym Uv Se Nsp • Ukuran plastifikasi: 180 • Pengaturan plastifikasi: H • Diameter ulir: 28 mm • Radius nosel: 10 mm • Diameter lubang nosel: 4 mm • Tersedia 3 unit