Beli Vem Z2 Kra 80,2/6 bekas (51.280)

Kondisi: baru, kapasitas angkut per lengan kantilever: 650 kg, tinggi rak: 4.000 mm, panjang total: 4.000 mm, lebar total: 1.480 mm, kapasitas beban per penyangga: 1.950 kg, EN-01 Dusdpfx Aaey Ixgxoqjt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.900 h, gaya penjepit: 1.600 kN, diameter sekrup: 105 mm, jarak antara tiang: 18.701.420 mm, volume langkah: 4.546 cm³, panjang total: 13 mm, lebar total: 4 mm, tinggi total: 3 mm, berat keseluruhan: 83 kg, tekanan: 1.778 batang, 8 saluran panas 16 sekuensial pneumatik Duodpfxjy I Apqj Aaqjt 2 peniup SERVO POMPA PC MC6 BERAT 83T JARAK ANTAR PLAT 3400MM

Kondisi: bekas, corner-cutter Dusdsx Rh D Eepfx Aaqjt

Kondisi: baik (bekas), de-001 Dujdpfx Aeb A I Sieaqst

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption Djdpjy Apdqofx Aaqeut - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: bekas, Krause C64-50 Autofeed Die Cutter ini adalah mesin yang kuat, dirancang untuk kerja pemotongan yang presisi dan efisien. Dengan format maksimum 600 x 500 mm, mesin ini menawarkan fleksibilitas untuk memproses berbagai jenis material. Mesin saat ini berada di Belanda dan dalam kondisi berhenti, menjadikannya peluang ideal bagi calon pembeli yang mencari mesin pemotong berkualitas tinggi. Format: 600 x 500 mm Perlengkapan: Djdpfx Aasvfx Ulsqeut Mesin pemotong Krause dengan pengumpanan otomatis Ukuran maksimum: 60 x 50 cm (23 x 19 inci)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, We are pleased to offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2010 onwards as trade-ins. Please offer us your available machines. Comprehensive maintenance by the manufacturer up to present. Injection Moulding Machine Krauss Maffei KM65-160 C2 Injection Moulding Machine: Manufacturer / Model: Krauss Maffei KM65-160 C2 Dsdpfx Aaoh Dp R Ejqsut Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Complete annual maintenance by the manufacturer Clamping Unit: Clamping force: 650 kN / 65 tons Tie bar distance: 405 x 405 mm Min. mould installation height: 250 mm Max. platen opening: 750 mm Standard mounting platens: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 unit Injection Unit Injection unit size / cylinder diameter: 160 / Cylinder ø25 mm and cylinder ø18 mm Max. shot weight (ø25): 47 g/PS Injection flow rate: 63 cm³/sec Specific injection pressure: max. 2500 bar Handling interface: Euromap 12 Dosing interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil capacity: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is immediately available from our warehouse. Loaded free on truck of the buyer or delivered free to location with reimbursement of freight costs. For information about the machines we offer and our company: - We only sell machines purchased out of ongoing production from our own stock in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency equipment – we are NOT brokers dealing in third-party property. - All machines offered come from successful companies where maintenance and care are a matter of course. - All machines offered are available for viewing in our warehouse.

Kondisi: bekas, Tahun pembuatan: 1978, nomor mesin/kendaraan: NBGMAN 2, Technical specifications: 1 Abus VS pillar-mounted slewing crane, SWL 1600 kg Max. capacity at full outreach: 1600 kg / 1.6 t Height: approx. 5.2 m, plus control cabinets (approx. 70 cm) Underside of jib: approx. 4.7 m Outreach: approx. 4.7 m, Hook height: approx. 4 m Total weight: approx. 2,000 kg Incl. 1000 kg SWF wire rope hoist with pendant control Connection: 400 V, 16 A, slewing range: 360° Crane is dismantled and immediately available Duedpfx Aor Igtkoaqjt Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Used condition, see photos Shipping by freight forwarding or collection by appointment

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 9.585 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, volume langkah: 523 cm³, tekanan injeksi: 1.904 batang, panjang total: 6.700 mm, lebar total: 1.600 mm, tinggi total: 2.300 mm, berat keseluruhan: 10.900 kg, translate_01 Duodpfey Aktmex Aaqet

Kondisi: bekas, KRAMER + GREBE CUTTER, 65 liter, 380V. Dusdpfx Aajy Hf Ugeqjt

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, nomor mesin/kendaraan: GP330/W404, 1 Dedpfxjy Hf A Do Aaqjut

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Multifunction Combination Machine minimax cu 410es F 26 TERSA * Ø 350 mm main saw blade with maximum cutting height of 118 mm, maintained even with scoring blade installed * Saw unit with permanently precise dual pivot segment guide * Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside * High-precision format sliding table made from anodized aluminium on hardened and swaged steel guide rails * Smooth-running, highly accurate format sliding table in anodized aluminium with proven, permanently easy-running ball contact system on hardened and swaged steel guide rails * Large crosscut frame (1200 x 650 mm) with roller and extendable telescopic aluminium fence up to 3300 mm * Saw unit tiltable from 90° to -45° * Tiltable spindle moulder from 90° to -45° rearwards into the fence * Four spindle speeds * Spindle motor with forward/reverse rotation * Quick changeover to thickness planer thanks to parallel opening surfacing tables * 2-speed feed on thickness table * Helical steel infeed roller for consistent wood feed * Three independent industrial motors * Supplied with separate saw rip fence and jointer fence * Main switch lockable * Motor equipped with protection switch * Approx. weight: 1300 kg * Surfacing Planer Surfacing table width: 410 mm Surfacing table length: 2200 mm Maximum planing depth: 5 mm * Extraction Connection Extraction port diameter (blade guard): 60 mm Number of extraction ports: 3 Extraction port diameter: 120 mm * Thickness Planer Table length: 775 mm Table width: 410 mm Min. working height: 3 mm Max. working height: 240 mm Max. planing depth: 5 mm * Electrical Data Number of motors: 3 Main drive motor power: 5 kW Scoring motor power: 0.55 kW Connection voltage: 400 V Mains frequency: 50 Hz Dusdsyz Sdwepfx Aaqot * Spindle Moulder Tilting range: 0 to -45° Spindle diameter: 30 mm Usable spindle length: 125 mm Speeds: 3500/6000/8000/10000 rpm * Maximum milling cutter diameter Lowerable: 240 mm Tenoning: 320 mm * Planer Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm * Circular Saw Unit Crosscut length: 2600 mm Cutting width with rip fence: 1000 mm Max. crosscut width left of saw blade: 3300 mm Saw blade tilting range: 90° to 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Max. saw blade projection at 90°: 118 mm Max. saw blade projection at 45°: 84 mm (Main) saw blade diameter: 350 mm Note: Main saw blade diameter with scoring (Main) saw blade speed: 4200 rpm * Sliding Table and Work Table Format sliding table length: 2660 mm Format sliding table width: 360 mm Format sliding table height: 142 mm Work table length: 1250 mm Work table width: 430 mm Work table height: 900 mm * Feed Feed speed: 6 – 12 m/min Transport available at extra cost.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard Dedjd Tbbdepfx Aaqsut - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Dusdpfx Aaefdkb Toqet Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised Dodjd Tqalopfx Aaqeut - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Dusdpfx Aeguk A Hjaqjt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Dujdpfx Aaemhhl Hjqot Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Duodjguk Dvjpfx Aaqot - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 1 km, daya: 170 kW (231,14 hp), jenis bahan bakar: diesel, berat kosong: 10.500 kg, berat keseluruhan: 14.100 kg, ukuran ban: 395, konfigurasi gandar: 4x4, jarak roda: 3.850 mm, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: lain, Tahun pembuatan: 2026, Perlengkapan: ABS, derek, filter jelaga, hidrolik, kendali jelajah, komputer bawaan, kopling trailer, kunci diferensial, lampu depan tambahan, pendingin udara, penggerak semua roda, sistem navigasi,

Kondisi: sangat baik (bekas), bohrleistung-in-stahl-65mm Dodpfx Ajyyqrwsaqsut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 4.517 h, gaya penjepit: 16.000 kN, diameter sekrup: 125 mm, berat injeksi: 7.450 g, This 3-axis hydraulic injection moulding machine, Krauss Maffei 1600-17200MC, was manufactured in 2001. It offers a clamping force of 16,000 kN and a screw diameter of 125 mm. The maximum shot weight is 7,450 g, and the platen size is 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1600-17200MC, which we are offering for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight opening (x × y): 1,800 × 1,400 mm • Maximum mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Movable platen force: Open 177 kN / Close 153 kN • Ejector stroke: 300 mm • Ejector force (forward/reverse): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder / screw set (1x) • Internal cooling system Duedpfx Aoyyyr Tjaqst • Core pull unit (2x)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, berat injeksi: 2.452 g, en Dusdpfx Aasyyxc Deqet

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Mesin cetak injeksi Krauss-Maffei 160 ton, tahun pembuatan 2006, dengan konveyor. Diameter ulir 35 mm, 2 penarik inti, 6 zona hot runner. Mesin ini diserahkan setelah direkondisi oleh kami dan dapat didemonstrasikan dalam kondisi terhubung listrik di tempat kami! Dusdpfoh Dh Duox Aaqjt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, Horizontal Injection Molding Machine by Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control. Approximate working hours: 60,000. The machine is delivered RE-Conditioned by our team of technical specialists and in optimal working condition. We can also offer on-site commissioning at the customer's facility, ensuring the machine operates properly upon completion of installation. Technical Specifications Dusdjw Avafepfx Aaqst SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2,242 Bar SHOT VOLUME: 2,695 cm³ INJECTION WEIGHT: 2,452 g (PS) YEAR OF MANUFACTURE: 2006 WORKING HOURS: 60,000 MIN./MAX. MOLD HEIGHT: 550/1,100 mm MAX. DAYLIGHT: 2,100 mm OPENING STROKE: 1,600 mm TIE BAR DISTANCE: 1,120 x 1,000 mm PLATEN DIMENSIONS: 1,600 x 1,530 mm CLAMPING FORCE: 8,000 kN

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year of manufacture 2004, with only approx. 45,000 operating hours in automatic mode. The machine is delivered overhauled. Duedjhy Nnbopfx Aaqst OVERHAULED MACHINE Equipment: - 6 pneumatic cascades - 24 hot runner zones - 1 core puller on the fixed platen and 1 core puller on the moving platen - Electric screw drive Technical details: CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT: 1,110 x 960 mm MOULD OPENING STROKE: 1,150 mm MAX. OPENING DISTANCE: 1,750 mm SCREW DIAMETER: 90 mm MIN. MOULD HEIGHT: 600 mm YEAR OF MANUFACTURE: 2004 SHOT VOLUME: 1,953 cm³ SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar