Beli Wiemers R1450 bekas (176)

Kondisi: baik (bekas), Tahun pembuatan: 1988, nomor mesin/kendaraan: 40 / 670, Fungsionalitas: belum diuji, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. The unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: U40 Podpfow Ehzyex Al Iogk Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Pgedpew H Dgnjfx Al Ijk Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 135 kg, tinggi total: 250 mm, panjang total: 900 mm, lebar total: 400 mm, -KOM 694- Offered here is a hydraulic power clamping vice. It features a 360-degree swivel base and a vertical crank handle. Pgedpfxjwf Nc Sj Al Ijk Technical Data: Jaw width: approx. 200 mm Jaw height: approx. 65 mm Opening travel: approx. 355 mm Dimensions: approx. (900 mm x 400 mm x 250 mm) Weight: approx. 135 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, -KOM 3134- Mennekes Wall Socket Duo 5103A Offered here is a used Mennekes wall socket. We have additional identical wall sockets in stock. Pjdpfx Aewupyijl Iogk Manufacturer: Mennekes Part No.: 25.5103A Model: 5103A Protection rating: IP 44 Voltage: 400 V Number of poles: 5 Switch: mechanical interlock

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Psdpfehu E Egsx Al Ijgk Weight: 3.5 t Note: without tray

Kondisi: belum diuji (bekas), Forst RF 16 Internal Broaching Machine -WKG 1371- Technical Specifications: Podpfxohu E N De Al Iogk Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Fixture Seat: Ø 70 mm Note: Control valve missing

Tahun pembuatan: 1989, Kondisi: bekas, Manufacturer: Hönnema Psdpfx Alelu D Hke Iegk Model: KAT 63/1250 Year of manufacture: 1989 General / Technical Data: CNC slotting machine with indexing or rotary table for helical slotting. Max. stroke: 1250 mm Cutting speed: infinitely variable from 0 to 16 m/min Max. return speed: 16 m/min Max. slot width: 63 mm Fully automatic helical indexing device: RA 450 AUDR Note: Feed is provided by a stepper motor and a ballscrew spindle via the machine table. The machine table features a robust and smooth-running linear guideway. The machine is situated approx. 1,500 mm below floor level! The machine is connected to power in our warehouse and can be inspected.

Kondisi: belum diuji (bekas), Kenward surface grinding machine Offered here is a surface grinding machine from Kenward. Technical specifications: Pedshg Nh Espfx Al Ijgk - Grinding type: horizontal peripheral grinding - Maximum grinding length: 300 mm - Maximum grinding width: 100 mm - Grinding wheel diameter: Ø 120 mm - Z-axis travel: 100 mm - Voltage: 380 / 440 V - Frequency: 50 Hz - Speed: 2850 rpm

Kondisi: perlu perbaikan (bekas), panjang pembubutan: 400 mm, lubang spindel: 75 mm, kecepatan spindel (maks.): 3.800 rpm, general information about the machine offered here is a used lathe from the manufacturer Okuma. The machine is being offered as a source of spare parts. The machine runs, however, not all functions can be guaranteed. The keys for operation are missing. The machine is stored at our warehouse and can be inspected under power. technical data – CNC control: OSP 5000L-G CNC system (German) – Tool turret: 12 positions – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Spindle bore diameter: 75 mm – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm Podpfx Aljugmzko Iogk – Cutting speed XZ: 0.01-1000 mm/rev – Rapid traverse up to: 12,000 mm/min – Power supply: 380V – Rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (W x D x H): 3.9 m (with chip conveyor) x 1.8 x 1.8 m – Machine weight: 4500 kg

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Stationary, universal, and robust machine platform, made from folded steel profiles for industrial use. It features an integrated oil drip tray and can be relocated using a standard pallet truck, providing the platform with a wide range of application possibilities. To ensure safe ascending and descending, anti-slip steps have been installed. To achieve a comfortable working height, our platforms are available with various standing heights. Additionally, the height can be finely adjusted via the adjustable feet. Available standing heights without stair railing: - Standing height 480 mm - Standing height 570 mm The platform measures 101 x 93 cm. By default, the platform is supplied in RAL 7015 with a coarse-textured finish. Other RAL colors are available on request. For any special requirements, please contact us by email with your request. Depending on your application, the work platform can be customized with our various shelf modules. The storage modules are available separately, allowing you to configure your platform as needed. Note: Some images show optional accessories (such as storage shelves) which are available separately. Psdpfx Aleupy Hye Iegk

Kondisi: baik (bekas), -KOM 800- A magnetic chuck from Narex is being offered here. This is a permanent magnetic chuck. Pgjdod R Rv Tjpfx Al Iok Details: Manufacturer: Narex Type: PERMAG 250 687 Weight: approx. 19 kg Dimensions: Ø 250 mm, height: 87 mm Distance between magnetic strips: 20 mm

Kondisi: hampir baru (bekas), KOM 1572 Manufacturer: Unknown Loading area: approx. 2,000 x 1,000 mm (L x W) Loading height: approx. 440 mm Overall length with drawbar: approx. 3,250 mm Drawbar length: approx. 1,250 mm Payload: approx. 4,000 kg Steering: Single axle General information: Compact, heavy-duty industrial trailer designed for in-plant material handling. The trailer has been newly painted and fitted with reflective tape. Psdpogk Nphjfx Al Isgk Remarks: The trailer is equipped with a new 18 mm-thick, slip-resistant phenolic plywood floor panel. It features a turntable steering system. The tyres are in good condition. The trailer has been newly painted and marked with reflective decals. The trailer can be inspected at our warehouse. Please refer to the images for further information.

Kondisi: bekas, nomor mesin/kendaraan: 242350148, Here we offer a bench drill machine manufactured by Flott, model TB23L. The bench drill is mounted on a special lift table (not the original lift table). Technical data: - 6-speed manual spindle speed adjustment (via belt pulley) - MK2 taper Pgsdpfx Aolf Evcel Isk

Kondisi: bekas, nomor mesin/kendaraan: 231500079, -WT 108- Offered here is a bench drill and a special drilling unit. Bench drill: - 5 spindle speeds via pulley drive - Throat / stroke: 10 cm Special drilling unit: - pneumatic clamping device Pjdpfx Alslf Ezws Iegk - automatic feed

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 225, manufacturer:-schütte model:-adh-160 machine-no.:-225 year-of-manufacture:-1981 weight:-11t general-information-/-technical-data: maximum-turning-length:-125-mm maximum-workpiece-diameter:-168-mm maximum-drilling-depth:-125-mm adjustable-cycle-time:-from-3.4-to-450-sec. operating-hours:-8,200-h working-spindle-speed:-from-90-to-1,120-rpm installation-area-(l-x-w-x-h):-approx.-4,730-x-1,700-x-2,120-mm power-supply:-380v-/-50hz accessories: 7-cross-slides 8-longitudinal-slides thread-cutting-device 4x-2-jaw-chucks-Ø160mm chuck-type:-drawbar-chuck-with-clamping-diameter-15 chuck-model:-röhm-0w-406-682-clamping-force-1,200-da-n 4x-3-jaw-chucks-Ø160mm chuck-type:-drawbar-chuck-with-clamping-diameter-15 chuck-model:-röhm-1w-406-681-clamping-force-1,800-da-n loading-arm-above-chuck-100mm. the-workpiece-is-fed-to-the-loading-arm-by-a-swing-arm-and-rotar y-gripper. note: Pedpfx Alsipu U Uo Iegk the-machine-is-in-very-good-condition-and-has-very-low-operating -hours. the-machine-is-set-up-for-crankshaft-halves-for-small-combustion -engines.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 60305, en-001 Podpfx Aeiqkb Rel Isgk

Tahun pembuatan: 1967, Kondisi: baik (bekas), WKG 234 Ditawarkan sebuah mesin frais meja bundar merek Müller tipe Duo Främatic. Data teknis: Pabrikan: Müller Tipe: Duo Främatic Tahun pembuatan: 1966 Holder alat: ISO 50 Area penjepitan meja bundar (dalam): 650x1490 mm Pergerakan meja: rotasi tak terbatas Feed kecil: 100 mm/menit Feed besar: 2000 mm/menit Putaran maksimum: 650 rpm Putaran minimum: 88 rpm Jumlah kecepatan: 8 tingkat Berat: 5 ton Spindel frais: 2 unit Jarak meja ke spindel: 350 mm Daya listrik: 27 kW Catatan: Cocok untuk kepala pisau carbide (ø315 mm) untuk aluminium ringan hingga ø400 mm Pengangkatan pisau frais otomatis 1 mm tersedia Pedpog Ummaefx Al Isgk Penyetelan pinol per 100 mm Penggerak spindel frais dapat dioperasikan terpisah Tersedia beberapa unit mesin!

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Pgjdpfxjgyd Sve Al Iok Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Pgjdpsgyd S Defx Al Ijk Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Pgsdpfx Aot Dwb Del Isk Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), This listing offers a row drilling machine (Lochreihenbohrmaschine) by Knoevenagel. Specifications: - Table dimensions: 58 x 43 cm (with 0-50 cm scale) - Height-adjustable and tiltable table Podped Sdurjfx Al Iegk - Model: VGC 18809 - Voltage: 420 V, 4.0 A - 15 spindles For further details and to assess the machine’s condition, please refer to the photos.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3081- Offered here is a fixed (non-rotating) live center. Please note that this is not a typical Morse taper (MK) or steep taper (SK) mounting. Technical Data: Weight: 25 kg Smallest diameter: approx. 88.5 mm Pedpfxowxup Rs Al Isgk Largest diameter: approx. 100 mm Shank length: approx. 234 mm Weight: approx. 25 kg

Kondisi: bekas, Tahun pembuatan: 1963, Fungsionalitas: belum diuji, Manufacturer: Steinel Model: 6 Stations Year of Manufacture: 1963 Weight: approx. 2,500 kg Psdpfjwyn S Uex Al Isgk General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations in small workpieces Number of drilling units: 7 Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread cutting unit Feed of drilling units: Mechanical feed via quill Drill heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: Hand-operated collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volts, 50 Hz Accessories / Special features: • Designed for mass production applications • Equipped with a sturdy machine table, swarf removal system to the underside of the table center, with a separate large coolant tank • Comprehensive range of clamping devices and auxiliary equipment • Fitted with a 6-station rotary indexing table

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: Pedew Ighispfx Al Iegk The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: baik (bekas), -KOM 3030- Offered here is a heavy-duty shelving system. The condition of the shelving system is good. Dimensions: Upright: approx. 4500 mm x approx. 1250 mm Shelf: approx. 2700 mm x approx. 1250 mm Crossbeam: approx. 2750 mm long Pgodeu Unqcspfx Al Ijk For all further details, please refer to the pictures! Collection is free of charge. You will receive a proper invoice with VAT shown separately upon purchase. We have more various interesting items for sale. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!