Beli Esta Filtower F-160 W3 bekas (38.618)

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2067, Maximum working width (mm): 800 Dcedpfopvi U Rsx Ac Tei

Kondisi: baik (bekas), Technical data for the pallet racking upright: Racking system: Arestant Type: AS Included in delivery: 01x pallet racking upright, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Includes horizontal and diagonal bracings, base plates The uprights are pre-assembled (bolted lattice construction) Height: 4,500 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Dcedswa Tcrspfx Ac Tei Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any delivery or shipping requested in addition is subject to extra costs, which can be inquired with us depending on the delivery location and scope.

Kondisi: baik (bekas), Technical data for the locking pin: System: Arestant Type: AS Scope of delivery: 10x locking pins, used Material finish: fully galvanized Weight: 0.018 kg/pc. For securing the longitudinal beams against unintentional lifting Your contacts at our company: Dcodpsw Hbhpofx Ac Tei Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required beyond this, additional costs will be incurred which can be quoted separately depending on the place of delivery or scope of delivery.

Kondisi: baik (bekas), Included in the scope of delivery: 01x shelf connector, used Material color: light blue Total length: approx. 1,600 mm Profile dimensions: U 50 x 28 mm Number of holes: 2 pcs. Hole Ø: approx. 11 mm Weight per piece: approx. 1.8 kg General information about the item: This item is only available for collection. If transportation or shipment is required, additional costs will apply, which can be provided upon request depending on the delivery location and the scope of delivery. Dsdpfsk Uyriex Ac Tjci

Kondisi: baik (bekas), Dalam paket pengiriman termasuk: 01x Plat dasar, baru Produsen: Arestant NS Kode tipe: STD Fussplatte BP80 Warna/material: galvanis sendzimir Untuk lebar profil rangka: 80 mm Ketebalan material: 6,00 mm Lebar total: 118 mm Kedalaman total: 150 mm Tinggi: 45 mm Jumlah lubang bor: 03 buah Diameter lubang bor: 13 mm Dedpfjxgp E Tox Ac Toci Berat per buah: 0,83 kg / buah Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan di tempat. Permintaan pengiriman atau transportasi tambahan akan dikenakan biaya tambahan yang dapat dikonsultasikan kepada kami sesuai dengan lokasi pengiriman atau pengiriman barang.

Kondisi: sangat baik (bekas), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Dudukan: holder SK40 DV40A SE40 050 • Diameter: Ø160 mm • Jumlah slot insert: banyak – satu set lengkap • Jenis insert: 058 (dapat digunakan ulang, dapat diganti) • Kondisi: sangat baik, gigi dan bodi tanpa kerusakan, siap pakai • Bodi baja seimbang presisi • Produsen: WIDAX – Buatan Jerman • Ideal untuk mesin milling CNC dan pusat pemesinan dengan spindle SK40 Dcodexmu A Dopfx Ac Toi

Kondisi: sangat baik (bekas), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional device designed for operation in industrial installations, water circuits, and technological systems. ⚙️ Technical data: Pump manufacturer: Sterling Fluid Systems Dcodjyz Dxmspfx Ac Tji Model: ZTIC 040160 Type: AA ODC B2 KX Motor: Siemens IE1 Power: 3.0 kW Supply voltage: 230/400V (3~) Frequency: 50 Hz Speed: approx. 2835 rpm Protection class: IP55 Insulation class: F Connection: Flanged 🛠️ Features: Centrifugal pump for water and industrial liquids Heavy-duty industrial construction Reliable Siemens motor Flanged version – easy installation Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use present 📌 Applications: industrial installations heating and cooling systems water circulation general manufacturing agriculture 📦 Included: pump with Siemens motor as shown in the photos 🚚 Shipping: Courier or pallet shipping available Personal collection possible Support with transport arrangement possible

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Mesin Press Lengkung Format Kecil BAS 450-KF8 Untuk pengepresan produk satuan (lipat kecil) dalam produksi tunggal maupun ganda. Dua pasang rol penekan yang dapat diatur secara terpisah - Rol penekan awal diameter 40 mm - Rol penekan utama diameter 60 mm Pengaturan ketebalan lembaran yang mudah dan cepat Penggantian sabuk masukan tanpa masalah Pergantian format tanpa alat Kontrol mandiri (Start/Stop) Penyesuaian ketinggian dengan meja angkat (tinggi masuk min. 550 mm / maks. 900 mm) Format min.: 30 mm x 50 mm / maks.: 450 mm x 450 mm Ketebalan produk maks.: 8 mm Tekanan press: 8.000 N Kecepatan: 30–160 m/menit Dcsdpjxvfaxjfx Ac Toi

Kondisi: bekas, PLANTA DE ZINC PARA TUBOS, fabricada por VOEST ALPINE / LOECO Capacidad máxima: 60.000 t/año (16 t/h) Dimensiones producibles: ¼” a 4” Longitudes producibles: 4 a 7 m Capa de Zn: 400 g/m2 según DIN 2444 Dsdpjyman Hsfx Ac Toci

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, In this offer, you are purchasing a used Multi Purpose Stacker "Plockmatic MPS" Items included in the sale: 1 x Plockmatic MPS Type F139-101 Compatible with other Plockmatic finishing units Fits various Canon / Ricoh machines Condition: This offer is for a used device which may show signs of wear (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Seaworthy packaging and worldwide shipping are available on request! For further information, feel free to contact us directly. Dcodpfx Aswnqp Eec Tji

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter rol: 48 mm, lebar rol: 48 mm, guling jungkit: 85 mm, lebar total: 600 mm, tinggi total: 620 mm, panjang total: 4.750 mm, panjang pengangkutan: 4.750 mm, lebar konstruksi: 600 mm, tinggi konstruksi: 620 mm, berat kosong: 80 kg, Beberapa unit tersedia – silakan kirim permintaan Anda! Nomor artikel TAF: 1000005688 Produsen: Nestaflex Tahun pembuatan: tidak diketahui Dimensi keseluruhan (PxLxT) dalam mm: 1.400 x 600 x 620 Lebar termasuk penggerak: 600 mm Panjang konveyor dalam mm: dari 1.400 hingga 4.750 Lebar konveyor dalam mm: 500 Tinggi konveyor dalam mm: dari 620 hingga 950 Kapasitas beban antara 2 kaki: Jumlah kaki: 4 Tipe rol: baja Djdpfxsx Dmx Ee Ac Tjci Jumlah rol per poros: 5 Jarak antar rol dalam mm: 85 Diameter rol dalam mm: 48 Berat bersih: 80 kg Kondisi: bekas / berfungsi penuh Tes fungsi: OK

Tahun pembuatan: 2026, Kondisi: diremajakan ulang (bekas), Welded Tube Line VAI 89.5(6) with Universal CTA Forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 – 88.9 mm - Square tube: 30x30 – 70x70 mm - Rectangular tube: 40x20 – 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0 mm with S235J2) - Speed: 100 m/min Complete line includes: - Double expanding mandrel with OTO AD408 SD PEELER - Entry line with coil opener, motorized pinch-roll, pre-straightener, and side guide rollers - Automatic end-to-end strip welding machine - Intermediate strip guidance support Dcedpfx Acsy Uhxke Tji - Break down section - Universal forming CTA VAI CTA90 - Fin pass section - Welding - Double cooling tunnel - Sizing - Offline sizing stands - Turk heads - Motorized exit roller conveyor Scope of supply: 1. Double expanding mandrel with OTO AD408 SD PEELER - Strip width: 500 mm - Hydraulic expansion - Upper/lower protection roller - 8 Tn/arm - Pneumatic brake with servo control 2. Strip decoiler - Coil opener 3. Strip guidance 4. Break down - 2 motorized stands - One-piece cast frames - Hydraulic thickness compensation or quick adjustment - Shaft diameter: 89 mm - SIKO mechanical indicator - Total installed power: 106 kW 5. Forming section - Universal forming section CTA VAI CTA90 6. Fin pass - 2 motorized FP stands with quick-change on the base - Monoblock cast stands - Hydraulic thickness compensation and quick adjustment - Shaft diameter: 89 mm - SIKO mechanical indicator - Total installed power: 106 kW 7. Welding - 4-roll configuration - Reinforced welding head with lateral and upper adjustment 8. Double cooling tunnel - 2 x 4000 mm with V-roller supports 9. Sizing - 4 motorized sizing boxes - Total installed power: 260 kW - With quick-change stands - Upper and lower SIKO indicators 10. Offline sizing stands - 4 motorized sizing boxes - Total installed power: 260 kW - With quick-change stands - Upper and lower SIKO indicators 11. Turk head section - 3 turk heads - Reinforced change plates 12. Complete roller set Round tube diameter: 33.7 – 88.9 mm Square tube: 30x30 – 70x70 mm Rectangular tube: 40x20 – 100x40 mm Thickness: 0.8 – 5.0 mm (6.0 mm with S235J2) Speed: 100 m/min

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 70 kg, Penopang robot yang kokoh dan dibuat khusus untuk Universal Robots UR10 (robot tidak termasuk). Dibuat dari profil baja berkualitas tinggi, menawarkan stabilitas dan daya tahan luar biasa. Dimensi: 1000 × 1000 × 480 mm Berat: ~70 kg Bahan: Baja Kondisi: Sangat baik, seperti baru Mobilitas: Dilengkapi roda caster yang dapat dikunci untuk memudahkan reposisi Pelat Atas: Dirancang untuk UR10, namun pelat atas dapat dengan mudah diganti untuk konfigurasi lain Pegangan: Terdapat pegangan terintegrasi untuk penanganan dan transportasi yang aman Dcedpfx Acey Iccdo Toi Lokasi: Budapest, Hungaria Sangat cocok untuk lingkungan industri, R&D, atau produksi yang membutuhkan basis kokoh dan mobile untuk aplikasi robotik. Pengiriman dengan basis EXW (kami dapat membantu pengiriman jika diminta). Harga belum termasuk PPN.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available Dodpfoh Ek Daex Ac Tjci - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany Dcsdpfx Acjmhhf So Tsi - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm Dcsdsmhh Dtspfx Ac Tsi - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: MKF4810-cp, Fungsionalitas: berfungsi sepenuhnya, daya: 80 kW (108,77 hp), laju aliran volumetrik: 64.000 m³/jam, diameter manifold masuk: 150 mm, luas filter: 480 m², tinggi total: 4.000 mm, panjang total: 14.850 mm, lebar total: 2.670 mm, Perlengkapan: Penandaan CE, Kami menawarkan sistem ekstraksi stasioner Modesta bekas ini, tahun pembuatan 2006. Spesifikasi: • Sistem ekstraksi vakum efisiensi tinggi bekas, merek Modesta • Kapasitas sekitar 64.000 m³/jam • Luas permukaan filter 480 m² • Diameter selang filter 150 mm; jarak antar selang luas untuk penanganan material • Ruang ekspansi untuk pemisahan awal optimal dan beban material rendah pada selang filter • 16x kipas 4,0 kW 2700-2200 Pa; total daya 80 kW • Transportasi rantai • Pembersihan dengan udara tekan • Sambungan pipa pemadam kering Dcjdpfoyywhxjx Ac Tsi • Dimensi: (PxLxT) 14,85 x 2,67 x 4,00 m • Termasuk panel kontrol • Tahun pembuatan 2006 • CE / ATEX / NEN EUR 10.000,–

Tahun pembuatan: 2003, Kondisi: bekas,

Tahun pembuatan: 2024, jam operasional: 2 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, DESTACO Pneumatik Kuat Silinder WK3000-30-6-1. No. artikel 0576762. Gaya piston pada 6 bar: 3000N. Gaya penjepit maksimum 30.000N. Informasi lebih lanjut ada di gambar. Dibeli pada 2024 hanya untuk pengujian. Inspeksi dimungkinkan. Penjualan tanpa garansi dan pengembalian. Dodpfx Acsvb Di Tj Toci

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1991, nomor mesin/kendaraan: RS110/3, Data teknis: 1 unit Zasche / Stahl ZHD 1600, crane kolom berputar, kapasitas angkat 1600 KG Daya angkat penuh: 1600 KG / 1,6 ton Tinggi: sekitar 3,45 m, bagian bawah lengan: sekitar 3,2 m Jangkauan: sekitar 3,5 m, tinggi kait: sekitar 2,85 m Berat total: sekitar 1000 kg Dengan kerekan rantai SEW 1600 KG Sambungan: 400V 16A, area putar 360° Buku pengujian tersedia Crane dalam keadaan dibongkar dan siap langsung tersedia Lokasi barang: 75053 Gondelsheim Yang dijual hanya crane yang terlihat di gambar Dcsdpfoxq Tw Usx Ac Tei Kondisi sangat baik, lihat foto Pengiriman melalui ekspedisi atau pengambilan sendiri sesuai perjanjian

Kondisi: baru, V160mm/120mm L200mm Dedolp Hvhopfx Ac Teci

Kondisi: baik (bekas), TMZ F-102 76x106 cm Stanzmaschine Die Maschine ist voll funktionsfähig und sofort einsatzbereit. Hergestellt in Spanien. Format: 760 x 1060 mm Gewicht: 3.600 kg Stromversorgung: 380V Installierte Leistung: 4,5 kW Ausstattung: – Pneumatische Kupplung – Bedienpult – Montagegestell – 3 Betriebsarten: Dauerbetrieb, mit Zeitverzögerung, manuell – Zentralschmierung Dodpfoziytmox Ac Tjci – Schutzvorrichtungen – Betriebswerkzeuge – Blech für Anpressdruck

Kondisi: perlu perbaikan (bekas), Otomatisasi Tangki Ekspansi yang Dikendalikan Kompresor, Flamco Flexcon M-K 1600, Mesin Bekas Produsen: Flamco B.V. (Belanda) – Produsen terkemuka teknologi sistem HVAC dan pemanas Dodpfx Aezkbcrsc Tjci Tipe / Seri: Flexcon M-K 1600 (Otomatisasi ekspansi yang dikendalikan kompresor) Tipe sistem: Tangki ekspansi berdiafragma dengan unit kontrol untuk sistem pemanas dan pendingin Kapasitas nominal: 1600 liter Kondisi: Bekas, Kompresor tidak ada di dalam tangki Dimensi keseluruhan: Parameter teknis dan operasional: Tekanan kerja maksimum: 6,0 bar / 10,0 bar (tergantung pada varian model tertentu, harus diverifikasi pada pelat nama) Suhu sistem maksimum: 120 °C Suhu diafragma kontinu maksimum: 70 °C Tegangan kontrol / suplai: 230 V / 50 Hz (atau 400 V tergantung pada konfigurasi blok kompresor) Kelas perlindungan: IP 54 (Lemari kontrol terlindungi dari debu dan percikan air) Area Aplikasi yang Sesuai: Flexcon M-K adalah unit ekspansi berperforma tinggi yang dikendalikan kompresor, yang dirancang khusus untuk menjaga tekanan dalam sistem pemanas, tenaga surya, dan pendingin yang tertutup. Sistem pemanas industri dan jaringan: Pemeliharaan tekanan yang presisi dan stabil untuk jaringan pemanas berskala besar dan stasiun termal. Gedung perkantoran dan fasilitas umum: Kompensasi volume ekspansi untuk sistem HVAC, pendingin, dan pemanas terpusat. Degasasi optimal: Operasi yang dikendalikan kompresor meminimalkan penurunan tekanan sistem, mencegah pembentukan gelembung, dan mengurangi korosi saluran pipa.

Kondisi: baik (bekas), Dalam cakupan pengiriman termasuk: 1x Rangka penopang dalam, bekas Warna material: seng Sendzimir Panjang keseluruhan: sekitar 1.250 mm untuk kedalaman rak: 1.200 mm jarak penyangga bersih: sekitar 1.100 mm penyangga palang: sekitar 50 mm sudut penyangga: L: sekitar 80 x 80 mm lebar keseluruhan: sekitar 860 mm lebar bagian dalam: sekitar 855 mm ketebalan material: sekitar 3 mm Rangka samping: Dcjdpfx Acer Dr Suj Tsi Panjang: sekitar 1.245 - 1.070 mm bagian depan miring Lebar: sekitar 200 mm Tinggi: sekitar 195 mm Penyangga ujung: Lebar: sekitar 200 mm Tinggi: sekitar 195 mm Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Ini adalah produk bekas, mungkin terdapat goresan, penyok, dan tanda-tanda penggunaan. Produk ini hanya ditawarkan untuk pengambilan langsung. Jika diperlukan pengangkutan atau pengiriman produk ini, akan dikenakan biaya tambahan, yang akan ditanyakan secara terpisah tergantung pada lokasi pengiriman atau cakupan pengiriman.

Kondisi: sangat baik (bekas), 7259 Dcsdpozh Ic Hjfx Ac Tsi