Beli Horizon Bq-270V bekas (1.455)

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Njdpfx Ajfg E H Iel Tolh Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, MSS2024-001 Nlsdjfg E H Njpfx Al Toh

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter Nljdpfxjfg E H Sj Al Teh * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Nledpfx Aefg E H Tsl Tjh Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Nledpfxsfg E Ibe Al Tsh Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Nsdpefd Abasfx Al Tjlh Image shows semi-automatic version.

Kondisi: baru, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 240 kg Required space approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The lower travel can be steplessly adjusted by means of a hydraulic system. Raising the saw arm after the cut can be performed to any desired position, where it will remain securely in place. Nledpfx Aljfgyh Ne Toh The Z241/R comes equipped with: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Nedpfsfgyh Tex Al Tjlh Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support Nledpfofgyicjx Al Teh · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Nedpfx Aljfgyife Telh Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor. Nedpfx Aljfgyigo Tslh

Kondisi: bekas, Comec FM/OV2000 CAF Horizontal and Vertical Boring Machine with Vertical Saw Units. - 3 vertical saw units - 2 vertical boring heads Nlsdpfjt Hzhtex Al Tjh - 2 horizontal boring heads - 2 end boring heads - Plus 1 extra spindle

Tahun pembuatan: 2024, Kondisi: baru, Tungku Pemadaman dengan Minyak Horizontal Detail teknis: Nledpfxet D Tkuo Al Teh Rentang ukuran: 450x350x300 hingga 1200x800x800 Kapasitas beban: 100 kg hingga 1200 kg Durasi transfer: maksimum 29 detik, hingga kurang dari 17 detik Suhu tertinggi: 1320°C Tekanan vakum akhir: 10-1/10-4 Pa Survei Keseragaman Suhu (TUS): ≤±5 °C Laju peningkatan tekanan: ≤0,5 Pa/jam Tekanan gas pendingin:

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation Nlsdpeupw R Ajfx Al Teh • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device - Leveling elements

Kondisi: bekas, Tahun pembuatan: 1998, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular Saw band dimensions: 2965 x 27 x 0.9 mm Nledpfsu Sbpvjx Al Teh Table height: mm Band speed: 37 / 76 m/min Total power requirement: 1.0 kW Machine weight: approx. 0.38 t Required space: approx. 1.0 x 1.6 x 1.4 m Double mitre bandsaw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 2.500 h, Fungsionalitas: berfungsi sepenuhnya, TERSEDIA UNTUK INSPEKSI PUSAT PEMESINAN HORIZONTAL DOOSAN Model: HM1250 Nsdoz Ihnaopfx Al Tjlh Tahun 2015 Unit kontrol: FANUC 31I-B Sumbu X: 2100 mm Sumbu Y: 1500 mm Sumbu Z: 1500 mm Panjang meja: 1250 mm Lebar meja: 1250 mm Dimensi maksimum benda kerja: DIAMETER 2300, TINGGI 1725 Berat maksimum benda kerja pada meja: 40000 kg Kecepatan spindel: 6000 rpm Dudukan spindel: ISO 50 Torsi (kontinu / 10 menit): 1989 NM Jumlah perkakas: 90 posisi Tekanan tinggi: 70 bar

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, jam operasional: 18.960 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 510 mm, kecepatan pemakanan sumbu X: 8.000 m/menit, laju pemakanan gandar Y: 8.000 m/menit, laju pemakanan sumbu Z: 8.000 m/menit, produsen pengendali: Mitsubishi CNC Co., tinggi total: 2.206 mm, panjang total: 2.490 mm, lebar total: 3.220 mm, lebar meja: 400 mm, panjang meja: 400 mm, beban meja: 400 kg, berat keseluruhan: 7.200 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 7.000 rpm, daya motor spindle: 5.500 W, penjepit spindle: MK 4, jumlah spindel: 1, fitur perlengkapan tambahan: + same Extra Machine for spare parts!, Perlengkapan: dokumentasi / manual, konveyor serpihan, Kami menawarkan mesin pusat permesinan horizontal Mazak H400 yang sangat bagus ini, buatan tahun 1990. Produsen: MAZAK Model: H400 Nomor NC: M335M038240 Tanggal pembuatan: April 1990 Nomor seri: A81117 CATATAN TAMBAHAN: - Harga sudah termasuk SATU MESIN EKSTRA sebagai pengganti suku cadang! (gambar terlampir) - Penawaran ini mencakup banyak dudukan alat, collet, dan dua hub untuk pemasangan! Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami. Nljdpez E I Twofx Al Tjh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, PUSAT PEMESINAN HORIZONTAL MAZAK HCN 5000 cnc Smooth G MESIN LENGKAP DENGAN SISTEM PALLETECH 6 STASIUN DAN SATU UNIT PEMUATAN DAN PENGOSONGAN RENISHAW OMP60 Unit kontrol: SMOOTH G Sumbu X: 730 mm Sumbu Y: 730 mm Njdpfx Aloz Iw Ezj Tslh Sumbu Z: 800 mm Panjang meja (meja): 500 Lebar meja (meja): 500 Dimensi maks. benda kerja (panjang x lebar x tinggi) (meja): D.800x1000 Permukaan meja dengan lubang berulir Berat maks. benda kerja: 700 kg Spindel: 18000 rpm Dudukan spindel: ISO 40 Torsi (terus-menerus / 10 menit) (spindel): 168 NM Jumlah perkakas: 120 perkakas Tekanan: 15 Bar, persiapan 70 bar Ukuran PALET: 500x500

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 28.491 h, nomor mesin/kendaraan: 309, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.650 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: Fanuc, model controller: 15i, berat benda kerja (maks.): 5.000 kg, beban meja: 5.000 kg, berat keseluruhan: 28.000 kg, kecepatan spindel (maks.): 6.000 rpm, jam operasional spindle: 29.840 h, pasokan pendingin: 70 batang, hidung spindel: BT50, jumlah spindel: 1, jumlah slot dalam magazin alat: 120, Perlengkapan: dokumentasi / manual, konveyor serpihan, MITSUI SEIKI 100 A Tahun pembuatan 2006 120 tempat penyimpanan perkakas BT 50 Sistem hidrolik bertekanan tinggi Knoll, 2000 liter, 70 bar Konveyor serpihan Palet 1000x1000 mm Meja NC dengan presisi 0,001° Skala linier pada semua sumbu Kecepatan putar spindel 6000 rpm Dapat diperiksa saat proses pemotongan berlangsung. Nsdpfx Aloz Iyauj Tolh

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 30.271 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 147, jarak pergerakan sumbu X: 2.400 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.950 mm, produsen pengendali: Fanuc, model controller: 15i, tinggi total: 4.500 mm, panjang total: 5.500 mm, lebar total: 6.500 mm, beban meja: 8.000 kg, kecepatan rotasi (maks.): 4.000 rpm, berat keseluruhan: 40.000 kg, kecepatan spindel (maks.): 4.000 rpm, jam operasional spindle: 30.251 h, pasokan pendingin: 70 batang, hidung spindel: BT 50, jumlah spindel: 1, jumlah slot dalam magazin alat: 120, Perlengkapan: dokumentasi / manual, konveyor serpihan, Mesin MITSUI SEIKI HU 150 A bekas dalam kondisi baik dijual - Pengontrol Fanuc 15i - Sistem hidrolik bertekanan tinggi Knoll 200 liter, 70 bar - Konveyor serpihan - Majalah perkakas 120 posisi, BT 50 - Meja NC dengan akurasi 0,001° - 2 palet berukuran 1500x1500 Nlodpfsz Iyd Tex Al Teh - Sumbu Z yang diperluas - Mesin dapat diperiksa saat beroperasi - Tahun pembuatan 2007 - Skala linear pada semua sumbu

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Detail Teknis Diameter pemotongan 1000 mm Panjang mata gergaji 11100 mm Lebar pemotongan 1100 mm Total kebutuhan daya 20 kVA Berat mesin sekitar 14 ton Luas yang dibutuhkan sekitar 5,4 x 3,2 x 3,9 m Informasi tambahan Kapasitas pemotongan: Ø 1.000 mm, L 1.100 x T 1.000 mm min Ø 400 mm, L 400 x 100 mm Kontrol paralelitas permukaan: tampilan optik dalam mm Daya motor, penggerak pita 11,0 kW Hidraulik, 3,7 kW Pendingin 0,36 kW Sikat pembersih 0,09 kW Kecepatan pita 15 - 120 m/menit - tanpa langkah Kapasitas tangki 115 l, hidraulik 250 l, pendingin Dimensi mata gergaji 80 x 1,6 x 11.100 mm Luas yang dibutuhkan L 5.366 x T 3.215 x D 3.863 mm Tinggi meja 820 mm Nlsdpfxsz Iy Dyj Al Toh Berat 14.000 kg - pondasi tidak diperlukan Warna merah-hitam

Kondisi: baik (bekas), Tahun pembuatan: 2009, Nomor Referensi: 10662 Produsen: STARRAG HECKERT Tipe: HEC 1250 Athletic Tahun Pembuatan: 2009 Jenis Kontrol: CNC Kontroler: Siemens 840D Lokasi Penyimpanan: Halberstadt Negara Asal: Jerman Nomor Mesin: 221XXX Rentang Pergerakan Sumbu X: 2200 mm Rentang Pergerakan Sumbu Y: 1600 mm Rentang Pergerakan Sumbu Z: 1850 mm Diameter Spindel: 100 mm Berat Maksimum Alat: 35 kg Panjang Maksimum Alat: 800 mm Diameter Maksimum Alat: 250 mm Luas Permukaan Penjepitan: 1000 x 1250 mm Majalah Alat dengan: 60 buah Torsi Maksimum: 25.000 Nm Kecepatan Pemakanan Variabel: 40.000 mm/menit Kecepatan Cepat: 40 m/menit Jumlah Palet: 2 Waktu Penggantian Palet: 47 detik Berat Mesin Kira-kira: 26,5 ton Ketidakpastian Posisi P: 0,008 mm Deviasi Posisi Pa: 0,006 mm Sebaran Posisi Ps: 0,005 mm Putaran Maksimum Meja: 10 RPM Informasi Tambahan: Nljdpfx Aljz Adt Rs Toh - Konstruksi: Desain rangka yang simetris secara termal dengan pengaliran serpihan yang optimal untuk pemesinan pengecoran. - Area Aplikasi: Teknik mesin, teknik energi, serta pemesinan rumah roda gigi besar dan komponen mesin. - Spindel motor yang kuat (tergantung varian, hingga sekitar 82 kW) untuk pemesinan berat. - Starrag Heckert HEC 1250 Athletic (tahun pembuatan 2009) adalah mesin besar modular 4-sumbu yang bertenaga untuk pemesinan lengkap yang presisi dari benda kerja berat. Mesin dapat diperiksa dalam kondisi menyala setelah koordinasi.

Kondisi: baik (bekas), Tahun pembuatan: 2014, 10553 Manufacturer: HANDTMANN / BAVIUS Model: HBZ Trunnion 120 Year of manufacture: 2014 Control type: CNC control CNC: Heidenhain TNC 640 Location: Halberstadt Country of origin: Germany Machine No.: 200XXXXX X travel: 1,270 mm Y travel: 1,100 mm Z travel: 900 mm Table height: Ø 1,200 mm Table load capacity: 2,000 kg Max. tool weight: 20 kg Max. tool length: 90 x 200 / 24 x 400 mm Max. tool diameter: Ø 130 mm Tool holder: HSK 100 Number of tool stations in magazine: 40 Tool magazine capacity: 140 pcs. Spindle speed – infinitely variable: 14,000 rpm Max. torque: 15,000 Nm Rapid traverse X axis: max. 60 m/min Rapid traverse Y axis: max. 60 m/min Rapid traverse Z axis: max. 60 m/min Machine length: 7,500 mm Machine width: 5,500 mm Machine height: 3,500 mm Machine weight approx.: 26 t Rapid traverse C-axis: max. 25 rpm Rapid traverse A-axis: max. 20 rpm A-axis (swivel axis): -30 / +120° C-axis (rotary table axis): 360° Nlsdpfozc D Aaox Al Teh Additional information: - Horizontal machining center, Y-axis arranged vertically - Machine frame constructed as a welded structure - Mounted on height-adjustable precision wedge shoes - Chip tray with coolant system for external flood cooling Capacity: approx. 400 liters, with fresh water pump, low-pressure circuit, approx. 40 l/min at approx. 5 bar, and rinsing nozzles at the Z-axis and/or the spindle - Complete safety enclosure - Stainless steel internal lining - Work area lighting - Manual loading door to work area with polycarbonate safety glass and additional glass pane - Lateral viewing window to work area with polycarbonate safety glass and additional glass pane - Maintenance area freely accessible - Hollow shank taper HSK 100 - Tool clamping via springs, tool release hydraulic - Tool clamping control - Taper cleaning - Including spindle orientation Machine can be inspected under power by arrangement.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 602/02, lebar di tengah: 4.000 mm, tinggi pusat: 415 mm, kecepatan spindel (maks.): 1.600 rpm, model controller: Control System Euro Turn, RINCIAN TEKNIS Tinggi maksimum: 415 mm Diameter bubut di atas meja: 830 mm Diameter bubut di atas kepala geser: 540 mm Jarak antar pusat: 4.000 mm Diameter lubang spindel: 130 mm Kecepatan putar spindel: 2–1.600 RPM Nlodpfxsz Ebbzj Al Teh RINCIAN MESIN Sistem kendali: Teach-in Merek sistem kendali: Monforts Jenis sistem kendali: Control System Euro Turn Daya: 55 kW Dimensi & Berat Dimensi (P x L x T): 6.750 x 2.100 x 2.020 mm Berat kosong: 7.500 kg Paket pengiriman: 2 unit PERLENGKAPAN Dokumentasi Tanda CE

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Kapasitas pemotongan 90° (persegi panjang): 460 x 250 mm Kapasitas pemotongan 90° (lingkaran): 330 mm Nledjz Drarepfx Al Toh Kapasitas pemotongan 60° (persegi panjang): 205 x 200 mm Kapasitas pemotongan 60° (lingkaran): 205 mm Kapasitas pemotongan 45° (persegi panjang): 305 x 250 mm Kapasitas pemotongan 45° (lingkaran): 305 mm Kecepatan pemotongan dapat disesuaikan: 48/96 m/menit (60 Hz) Dimensi pita gergaji: 27 x 0,9 x 3960 mm Daya yang dibutuhkan: 1,5 / 2,2 kW Berat mesin: 900 / 1060 kg (berat bersih/berat kotor) Dimensi mesin (Panjang x Lebar x Tinggi): 2310 x 1070 x 1630 mm