Beli Mütek Mgz 1330 bekas (270)

Tahun pembuatan: 2025, Kondisi: diremajakan ulang (bekas), Automatic Wire Straightening and Cutting Machine PRIMA 12, manufactured by SCHNELL (Italy) Completely refurbished “as new”, up to 12 mm SCOPE OF SUPPLY Two wire coil pay-off units: - Consisting of base and coil holder - Maximum coil weight: 3,800 kg - With automatic pneumatic brake, controlled from the line computer. Schnell PRIMA 12 Straightening and Cutting Machine: - Straightening unit with mechanical configuration and independent adjustment for each wire. - Serial interface for Minicontrol-type computer. TECHNICAL SPECIFICATIONS Year of refurbishing: 2025 Original year of manufacture: 2005 Lhsdpfsvtp Rmsx Agyen Wire diameter: - Single wire: 4 – 12 mm - Double wire: 4 – 10 mm Maximum drawing speed: 120 m/min Central mandrel diameter: 20 – 50 mm Maximum bending angle: 180° Maximum bending speed: 1650°/sec Pressure: 7 bar Average power consumption (400 V/50 Hz; 480 V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Approximate weight: 2300 kg Original year of manufacture: 2005 Year of refurbishment: 2025 Wire diameter, single wire: 4–12 mm Wire diameter, double wire: 4–10 mm Maximum drawing speed: 120 m/min Central mandrel Ø: 20–50 mm Maximum bending angle: 180° Maximum bending speed: 1650°/sec Average power consumption (400 V/50 Hz; 480 V/60 Hz): 2 kWh Pressure: 7 bar Weight (approx.): 2300 kg Dimensions (approx.): 3530x1330x2180 mm

Kondisi: bekas, Tahun pembuatan: 2023, Mobile lifting frame, manual trolley, geared trolley, crane trolley, trolley drive, crane travel unit, travelling crab, carrier trolley, suspended track trolley -Lifting capacity: approx. 5,000 kg -Condition: unused, without control system -Year of construction: approx. 2023 -Trolley gauge: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -Vertical travel distance: approx. 1330 mm -Lifting drive: by gear/rack -Trolley drive: 2x SEW geared motors KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW Ledpfeucaimjx Agyjhn -Hollow shaft diameter: Ø 40 mm -Design: hollow shaft, angled -Protection class: IP 54 -Brake -Travel wheels for rail system: steel, 90 mm wide, with adjustable guidance -Lifting mechanism drive: 1x SEW geared motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: hollow shaft, angled -Protection class: IP 54 -Brake -Overall dimensions: 4725 / 2000 / H2420 mm -Total weight: 2000 kg

Kondisi: baru, Tahun pembuatan: 2026, Mesin Penghancur Satu Poros MRZ 530 Termasuk: Rotor Eco Ring (untuk mengurangi kebutuhan energi) Pilihan: Pengikis veneer dan kertas + €970 (harga bersih) * direkomendasikan untuk material yang sangat tipis dengan ketebalan kurang dari 3 mm Mesin penghancur satu poros mütek MRZ 530 kami menghancurkan berbagai jenis material seperti sisa kayu dari semua jenis, kayu lunak, papan serpihan dan serat keras, palet, kayu konstruksi, kayu bekas, karpet, kabel, kertas, karton, dan plastik. Mesin ini memiliki konstruksi yang kokoh, yang menjamin kualitas yang konsisten dalam pengoperasian berkelanjutan. Dengan senang hati kami menyediakan pengujian gratis dengan material Anda. Kami mengundang Anda untuk mengunjungi kami di Neckartailfingen untuk keperluan ini. Anda juga dapat mengirimkan material Anda kepada kami melalui perusahaan ekspedisi, dan kami akan mendokumentasikan pengujian dengan gambar dan video. Data mesin: Motor: 11 kW; 400 V - 50 Hz - 3 fasa, Pisau: dapat diputar beberapa kali, Diameter rotor: 260 mm, Pengendali: PLC Siemens S7-1200, Corong (mm): 510 x 810 mm, Volume corong: sekitar 0,4 m³, Penggeser yang dioperasikan secara hidraulik, Lubang saringan (10 - 40 mm), dapat dipilih, Sambungan penghisap Ø 160 mm, Berat: sekitar 1.000 kg, Dimensi: sekitar 1550 x 1100 x 1640 mm, Kadar kelembapan bahan baku: harus di bawah 30% (kadar air kering). Termasuk sebagai standar: • Sistem hidraulik cepat • Rotor profil • Kotak kontrol dengan pengendali PLC Siemens • Sistem start otomatis (bintang/segitiga) • Sistem mati otomatis saat rotor tidak beroperasi • Saluran penghisap yang dapat dilepas • Kecepatan 70 - 100 RPM untuk kinerja throughput yang lebih tinggi • Pengendali siklik untuk menghindari waktu henti • Pengendali langkah yang meningkatkan kinerja penggeser hidraulik • Panduan yang stabil untuk penggeser hidraulik Pilihan tambahan untuk mesin penghancur: - Ketinggian mesin penghancur ditingkatkan 30 cm (persiapan untuk ban berjalan) + €1.980 (harga bersih) - Ban berjalan berengsel + €8.770 (harga bersih) Bagian horizontal: 1200 mm Bagian miring: 2500 mm Sudut: dapat diatur antara 0-60 derajat Lodpfx Aged Db N Isyshn Ketinggian keluaran: sekitar 2000 mm + - 100 mm - Magnet pita + €5.980 (harga bersih) - Pengendali ban berjalan dan magnet pita + €2.750 (harga bersih) (Start dan stop disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar kelembapan (kadar air kering) harus di bawah 30% - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Kondisi: baru, Tahun pembuatan: 2024, Jumlah: 3 unit – harga per unit Tahun pembuatan: 2024 Jangkauan: 3143 mm Kapasitas angkut: 315 kg Jumlah roda: 4 Berat: 1330 kg Lodpfsz A U T Sjx Agyshn

Kondisi: baik (bekas), Tahun pembuatan: 1997, Industrial vacuum cleaner, dust extractor, industrial vacuum unit, floor vacuum, industrial safety vacuum Lhodpfx Aeranncjgyen -Manufacturer: Debus, industrial vacuum model DDS 605 7 31 M -Operating pressure: 6 bar -Air consumption: 2.6 m³/h -Suction capacity: 7.8 m³/h -Dust container capacity: approx. 110 liters -Container dimensions (total): Ø 640 x 730 mm -Unit dimensions: 1330/620/H1360 mm -Total weight: 153 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 235 mm, lubang spindel: 52 mm, diameter pembubutan: 400 mm, tinggi pusat: 200 mm, panjang pembubutan: 1.000 mm, PREMIUM CU 400 RD-Vario Series Lathes Our universal lathes and continuously variable speed lathes from the PREMIUM CU series offer a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed according to material type and turning diameter — a significant advantage when working with non-ferrous metals, plastics, and whenever a high-quality surface finish is essential for precision parts and fits. A particularly interesting feature is the R/L control units mounted on the tool slide, which enable easy selection of clockwise or counterclockwise spindle rotation. These units replace the shift rods commonly found on universal lathes. Efficient handling is ensured by electromechanical spindle brakes that provide ultra-fast spindle stopping. The leadscrews are equipped with overload protection. Performance Data and Specifications: - Distance between centers: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Swing over carriage: 235 mm - Swing without bridge: 550 mm - Bed width: 320 mm - Cross slide travel: 235 mm - Top slide travel: 110 mm - Maximum tool shank size: 25x25 mm - Chuck mounting: DIN 55027 No. 6 - Spindle nose taper: MK 6 mm - Spindle bore: 52 mm Speed ranges (infinitely variable): - Range 1: 18 – 98 rpm - Range 2: 48 – 265 rpm - Range 3: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric threads (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill travel: 100 mm Motor power: 7500 W Power connection: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck Lsdpfx Agey Hlxfjyshn - 5-piece quick-change tool post set - Halogen machine lamp - Emergency stop switch / no-voltage release - Chuck guard with safety interlock - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standard Features: - Heavy cast iron machine bed with excellent vibration damping - Removable bridge - Prism guides - Hardened and precision-ground spindle, high concentricity, adjustable precision bearings - Smooth-running spindle and feed gear with oil bath lubrication - Gears made from hardened and precision-ground chrome-nickel steel - Feed reversal - Covered, trapezoidal-thread leadscrew, hardened and precision-ground - Tool slide with lock nut - Precision adjustable slideways - Robust tailstock with adjustable offset for taper turning - Lathe accuracy according to DIN standards Including 3-axis digital position display This machine is available immediately in our showroom at 71334 Waiblingen-Beinstein. For equipment details, please contact us.

Kondisi: bekas, kapasitas angkut: 3.000 kg, Stone clamp ISO class: ISO Class 3 = 2,500 – 4,999 kg Lhjdpfxjudgaho Agysn Condition: Ready for use and fully functional Technical condition: Good Description: ISO 3A (51 cm) Capacity 3000 kg Sideshift Opening range 560–1460 mm Width 1330 mm Forks 1300 mm ID OS1354

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V Lodpferb D Nex Agyshn

Kondisi: baik (bekas), Straightening machine, wire straightening machine, decoiler-straightening machine combination, pay-off reel, wire decoiler, double reel, reel, pay-off reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punching machine, motorized reel, winding roll, decoiling reel, wire decoiler. Lhedein Rn Aspfx Agyjn - Wire Straightening Machine: Decoiler-Straightening Machine Combination - Type: not specified - Note: without documentation - Motor: Fukota 1.5 kW - Straightening rolls: for Ø 20 mm, see photos - Take-up rolls: Ø 152/215 x 1330 mm - Overall dimensions: 3040/2450/H2525 mm - Weight: 2080 kg

Kondisi: baru, Tahun pembuatan: 2026, Mesin yang sangat kuat dengan kekuatan pengepresan tinggi - juga cocok untuk menghasilkan kualitas briket yang dapat dijual, *tergantung pada jenis material. Silinder pengepres yang berukuran besar dan briket berdiameter 80 mm menjadikannya mungkin. Seri mesin pengepres briket kami yang paling laris + Teknologi yang telah teruji dan sederhana, untuk meminimalkan kemungkinan terjadinya kesalahan Lsdpfxjxfwde Agyohn + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin telah digunakan oleh pelanggan yang puas + Rasio harga dan kinerja terbaik Biaya tambahan untuk perangkat pendingin + €4.995, (dapat dipasang kemudian) * mendinginkan rahang pengepres dan oli hidrolik (disarankan, terutama jika mesin digunakan secara teratur selama lebih dari sekitar 3,5 jam tanpa henti) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket maks.: 100 mm Langkah briket optimal: 80 mm Kapasitas (tergantung pada jenis material): hingga maksimal 200 kg/jam* *tergantung pada berat jenis *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3 Fase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Berat: 1250 kg Volume oli: 220 liter Diameter silo: 1200 mm Kapasitas silo: sekitar 1 meter kubik Pompa: 75 liter Pra-kompresor hidrolik Opsi pendinginan rahang pengepres: ya, dengan aksesori khusus Rahang pengepres yang dapat didinginkan Opsi pendinginan oli hidrolik: ya Pendinginan rahang pengepres dan oli hidrolik dengan perangkat pendingin (aksesori khusus) Opsi pemantauan level: ya Opsi briket berbentuk batang: ya (tergantung pada jenis material) Opsi corong pengisian yang diperbesar: ya, dengan aksesori khusus Corong pengisian yang diperbesar Memenuhi standar CE . Persyaratan untuk bahan baku: - Kadar air harus antara 6% hingga maksimal 15% - Panjang serpihan maksimal 20 mm - Suhu pemasangan: ruang dengan suhu terkendali minimal +5°C - Bahan baku yang dimasukkan harus bebas dari logam dan kontaminan mineral seperti pasir, batu, dll. Kerusakan pada perkakas pengepres dan/atau peningkatan keausan dapat menjadi akibatnya.

Kondisi: seperti baru (mesin pameran), Kapasitas produksi hingga maksimal 50 kilogram per jam. Ledpfx Agezu Skneyohn Diameter briket: 50 mm. Motor utama: 4 kW. Desain yang sangat ringkas. Dimensi: 1.100 x 1.500 x 1.200 mm. Berat: 570 kg.

Kondisi: baru, Tahun pembuatan: 2026, en-1 Ljdpsd Hkqhofx Agyehn

Kondisi: bekas, Mesin penyegel samping otomatis penuh untuk pengemasan produk – terlepas dari panjangnya – dengan pembungkusan penuh dan tanpa tumpang tindih film. Dilengkapi dengan stempel silang baru. Mesin penyegel samping otomatis penuh dengan terowongan penyusutan – Mesin Penyegel Samping Otomatis Penuh Kallfass Universa 400 – Mini 400 Tahun 2004 – Nomor Seri: M 05.04.226 Lodpfx Aez Hwuasgyehn Sistem terdiri dari: Stasiun pengumpanan manual / Stasiun Pengumpanan Manual MGZ 400 Mesin penyegel samping / Mesin Penyegel Samping Otomatis Penuh Kallfass Universa 400 Terowongan penyusutan / Terowongan Penyusutan Kallfass Mini 400 Data Teknis: Panjang stempel silang / Panjang stempel silang 450mm Kapasitas pengemasan [siklus/menit] / Kecepatan produksi maks. hingga 85 kemasan/menit Panjang produk / Panjang produk min. 80mm Tinggi kerja (dapat disesuaikan) / Tinggi kerja (dapat disesuaikan) 780 mm – 930 mm Kecepatan ban berjalan / Kecepatan ban berjalan, tetap: 20 m/menit Film: Film lipat tengah / Film lipat tengah, sekitar 12 – 80 mikron Gulungan film, diameter inti / diameter luar / Gulungan film, diameter inti / diameter luar sekitar 76 mm - maks. 400 mm Lebar gulungan film / Lebar gulungan film maks. 600mm Catu daya / Catu daya 400 volt, 3 fase, 50 Hz, dengan konduktor pentanahan pelindung Kapasitas terukur / Kapasitas terukur 3,5 kVA Inspeksi video online melalui WhatsApp – MS Zoom – Telegram Tersedia di gudang Emskirchen/Nürnberg – Tersedia segera – Dapat diuji

Kondisi: hampir baru (bekas), Pemilah tulang Produsen: Inject Star Tipe: P 20 Ljdpfx Ajxtpgdsgyshn Kapasitas: 300 kg/jam Daya: 8 kW Dimensi: 1800x830x1800 mm Berat: 1330 kg

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Lhedechqxxspfx Agyon Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru,

Kondisi: baru, Tahun pembuatan: 2026, en-GB Lhodpfxed Nm Sie Agyen

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9.702-476.0, tekanan kerja: 180 batang, panjang selang tekanan tinggi: 20.000 mm, berat keseluruhan: 198 kg, masa garansi: 24 bulan, suhu: 80 °C, en001 Lhsdpfoxpgrisx Agysn

Kondisi: baru, Tahun pembuatan: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Customs tariff code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible edges Hydraulically operated pusher Screen perforation as required (10 - 40 mm) Extraction nozzle Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo clutch Lhodpfxjd Dgw Us Agysn Standard features included: - automatic star-delta starting - high-speed hydraulics - automatic stop if rotor idles - Speed: 70-90 rpm for high throughput - Pulse control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, chipboard, MDF panels and other materials (subject to trial and approval by the manufacturer) . Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ±100 mm - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop each synchronized with the shredder) . Raw material requirements: - Moisture content (dry matter) must be below 30% - Installation temperature: temperature-controlled room at at least +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm Lhodpfx Ajdubpuogyjn *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: bekas, nomor mesin/kendaraan: 26065, Tahun pembuatan: 2019, jam operasional: 4.323 h, kapasitas angkut: 1.400 kg, tinggi angkat: 1.612 mm, pengangkatan bebas: 1.529 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.060 mm, 26065 Machine Details: Year of manufacture: 2019 Load capacity: 1,400 kg Lift height: 1,612 mm Recorded operating hours: 4,323 h Lsdpfx Agjwputwjyshn Free lift: 1,529 mm Mast type: Duplex Mast height: 2,060 mm Dimensions (L/W/H): 2,500 / 800 / 1,230 mm Operating weight: 1,291 kg Battery year: 2020 ---- Equipment: * Initial lift * Full free lift * Plexiglas DGS ---- Further Equipment Information: Double-deck load capacity: 1,400/2,000 kg---- The operating hours stated are generally the hours read from the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are happy to buy your OLD machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Please note: This offer is subject to prior sale and errors. For B2B transactions, the machine is sold as is, not refurbished. All information is provided without guarantee. Subject to errors and changes.

Kondisi: baru, tekanan kerja: 210 batang, panjang selang tekanan tinggi: 20.000 mm, tegangan masuk: 400 V, berat keseluruhan: 160 kg, masa garansi: 24 bulan, suhu: 155 °C, en Ljdpfsy E Npljx Agyjhn

Tahun pembuatan: 2026, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Lhodpjd N Dn Djfx Agyon Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: baru, tekanan kerja: 200 batang, berat kosong: 206 kg, tegangan masuk: 400 V, masa garansi: 24 bulan, suhu: 155 °C, Technical Data: Condition: NEW Catalogue number: 1.071-936.0 Supply voltage (Ph/V/Hz): 3 / 400 / 50 Water flow rate (l/h): 600 - 1300 Working pressure (bar): 30 - 200 Temperature (°C): 80 - max. 155 Fuel consumption heating oil or gas at full load (kg/h): 9.5 Fuel consumption heating oil eco!efficiency (kg/h): 7.6 Power rating (kW): 9.5 Connection cable (m): 5 Fuel tank (l): 25 Weight with accessories (kg): 206 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: Automatic hose reel: integrated, original with 20m hose – automatic retraction Trigger gun: EASY!Force Advanced Spray lance: 1050 mm Power nozzle Servo control Lhsdsxxkpdjpfx Agyjn Features: Pressure shut-off Option for dual-lance operation Phase inversion plug (3~) Soft damping system (SDS) 2 detergent tanks Dry-running protection Automatic hose reel: - A high-quality, automatic original hose reel with a 20m long, coated steel hose ensures high resistance to mechanical damage. - The Longlife series meets Kärcher's highest quality standards, and the !EasyLock thread system allows especially fast hose and accessory connection with just one 360° turn. Detergent dosing: - Easy switching between detergent tank 1 and 2. - Precise detergent metering with rinsing function. Mobility concept: - Jogger principle with large, rubber-tyred wheels and a swivel castor. - Integrated tilt barrow for effortless transport over steps. - Push handles for easy movement and manoeuvrability. User-friendly controls: - One switch for all machine functions. Operational safety: - Easily accessible water filter protects the pump from particles in the water. Safety valves, water shortage and fuel supply protection ensure device availability. - The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. On-board accessory storage: - All accessories can be stowed directly on the machine. There are 2 hooks for suction hose and power cord. - Spacious storage compartment for detergents, gloves or tools, for example.

Kondisi: baru, tekanan kerja: 210 batang, panjang selang tekanan tinggi: 10.000 mm, berat kosong: 160 kg, tegangan masuk: 400 V, berat keseluruhan: 160 kg, masa garansi: 24 bulan, suhu: 155 °C, The HDS 10/21-4M eB is one of the most powerful hot water high-pressure cleaners in the mid-range class, offering intelligent ergonomics and excellent user-friendliness. Its slow-running, 4-pole, water-cooled electric motor, robust 3-piston axial pump with ceramic pistons, and the efficient eco!efficiency mode ensure top performance and reliable, economic operation. Further highlights include optimized burner technology, two detergent tanks, a comfortable mobility concept, comprehensive safety features, easy single-switch operation, and innovative accessory storage options. Technical Specifications: Condition: NEW Power supply (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 500 - 1000 Operating pressure (bar): 30 - 210 Temperature (with 12°C feed): min. 80 - max. 155 Connected load (kW): 8 Fuel consumption, full load (kg/h): 7.3 Fuel consumption, eco!efficiency (kg/h): 5.8 Power cord (m): 5 Fuel tank (l): 25 Weight (with accessories) (kg): 160.2 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: - EASY!Force Advanced spray gun - High-pressure hose: 10 m, DN8, 400 bar - Spray lance: 1050 mm - Power nozzle - Eco! Booster TR 033 wide-spray nozzle - Servo control pressure regulation Features: - Detergent function: 20 + 10 l tanks - ANTI!Twist system - Externally fillable tanks for detergent, scale protection, and fuel - Control panel with illuminated display - Pressure switch-off - Phase-reversing plug (3~) - Two detergent tanks - Dry-run protection Operational safety: - Easily accessible water filter protects the pump from particles in the water. - Safety valves and sensors for water shortage and fuel safeguard device the unit’s reliability. - Soft damping system (SDS) compensates for vibrations and pressure surges in the high-pressure system. On-machine accessory storage: - All accessories can be stored directly on the machine. Two hooks for suction hose and power cable. - Spacious storage compartment for detergents, gloves, or tools Detergent dosing: - Easy switching between detergent tanks 1 and 2. Lhedpfxsyg Ic Ss Agyjn - Precise detergent dosing with rinse function. Mobility concept: - Jogger design with large, rubber-tired wheels and a swivel castor. - Integrated tipping trough for easy transport over steps. - Push handles for convenient transport and maneuverability. Easy operation: - Single switch controls all machine functions.