Beli Schoen Ute/B20 bekas (985)

Tahun pembuatan: 2017, Kondisi: baik (bekas), Dijual ekstruder bekas Xtrutech XTS 24. Ekstruder ini berfungsi penuh dan telah digunakan di bidang powder coating, lengkap dengan banyak suku cadang. Kami dapat menawarkan ekstruder ini dengan dosing Brabender dan sabuk pendingin. Iajdpfx Asvcynuslcjt

Tahun pembuatan: 2005, Kondisi: bekas, SAMPUTENSILI - S200 - 2005 Iedsyl Srzjpfx Alcoat - kondisi bekas seperti terlihat pada foto - dalam kondisi terhubung listrik, dapat diuji - foto tambahan tersedia

Kondisi: baru, Tahun pembuatan: 2026, en-GB Iaedpfx Asd Nm Sislcet

Kondisi: baru, Tahun pembuatan: 2026, en-1 Iasdpfjd Hkqhsx Alcst

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Iaedodwktkspfx Alcjt Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation Iasdpfx Aled Nnwljcjt + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Iaedpfx Aotqfhxjlcot Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for both hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour (*depending on screen size and material. Significantly higher throughput possible for smaller wood residues) Motor: 22 kW; 400 V – 50 Hz – 3-phase Screen: 15/20 mm or by arrangement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) – can be swapped Suction connection Ø 200 mm Feed opening: 1000 x 1000 mm Dimensions: 2000 x 1800 x 1645 mm Sample picture above: machine color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulic system - Auto stop function with rotor idle - Rotation speed: 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-boosting incremental pusher control - Pertinax guides for hydraulic pusher - Vibration-damping machine feet Iaodpfx Aox Af Rdelcst - CE conform Available options (for additional charge): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Conveyor and magnet control unit + €2,750 net (start/stop synchronized with shredder) - Enlarged hopper 1500 x 1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must not exceed 25% - Material feed must be free of metals and mineral contamination. Otherwise, tool damage and/or increased wear may occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Iajdpsfci D Aofx Alcot Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, Mesin bending pipa bekas dari Jutec Iaedpfxjyfmwxe Alcot Tipe: 5000 Kapasitas: hingga sekitar 40 mm Panjang mandrel: 4500 mm Terkontrol CNC Kepala otomatis Kepala putar manual dengan penjepit hidrolik Termasuk 3 set alat Tahun pembuatan: 2009 Sangat jarang digunakan

Tahun pembuatan: 1992, Kondisi: bekas, 2nd tool turret, manufacturer SAUTER, type: 0.5.480.525, with 8 positions for VDI 50 tool holders, including EK 400 control unit. Originates from vertical turning machines. Iaodpfedg Tixox Alcot

Tahun pembuatan: 2000, Kondisi: baik (bekas), Driven tool holders VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. 2 pcs. SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1 pc. SAUTER 0.5.921.106072.814 No. 3 with ATC 1 pc. WENDEL 214.060/A3820 No. 4 with ATC Iaodpfx Aleh Iz Duecot 2 pcs. MULTIFLEX 252.71.566 No. 5 and 6 without ATC In good condition.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net Iaodpfx Aed H R Sxelcst - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Iaodedubpujpfx Alcot Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: bekas, Tahun pembuatan: 1970, Drive power 0 kW Mounting 0 Total power requirement 0 kW Machine weight approx. t Ijdpju Sbfdjfx Alcsat Space requirements approx. m

Kondisi: baik (bekas), Kreuter Schokoladentemperiermaschine Modell: TMK100 Ijdpfefh Tngox Alcjat Seriennummer: 7906/91 2013 von WolfDE generalüberholt, 100 kg Schokoladentemperiergerät, einstellbare Temperaturregelung, Rührwerk mit Schabflächen, inklusive aller Handbücher, 3-Phasen-Anschluss

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), A complete nonwoven fabric production line, including peripheral equipment and a full pre-mixing unit, is available. 1) Pre-mixing unit with garnett opener Houget Duesberg Bosson, year of manufacture: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, delivery roller: 1, feed rollers: 2, overall system dimensions (L/W/H): approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and fiber bale opener. 2) Filler chute Spinnbau Bremen, year of manufacture: 1989, machine dimensions (L/W/H): approx. 4000mm/2600mm/6250mm. 3) Belt weigher with vibrating chute by Protec. 4) Carding machine Hergeth, year of manufacture: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, pre-roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, tambour diameter: 1500mm, doffer roller diameter: 850mm, compression roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 – WebMax, year of manufacture: 2006, min. fineness range: 0.7dtex, fiber types: synthetic/natural/regenerated/blends, max. batt weight: 100g/m², max. batt weight with crosslapper: 5000g/m², max. crosslapping width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, crosslapper lift: 100mm, machine dimensions (L/W/H): approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions (L/W/H): approx. 1600mm/3650mm/1650mm. 7) Double needleloom Dilo CBF 31/HVSL 31, year of manufacture: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, needles per meter working width: approx. 15430, machine dimensions (L/W/H): approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Product storage Suchy WOB 3200, capacity: 40m³, fabric weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller width: 3200mm, machine dimensions (L/W/H): approx. 4300mm/5050mm/5300mm. 9) Longitudinal slitting unit Suchy, year of manufacture: 2006, weight: approx. 250kg. 10) Automatic upender winder, roller diameter: 350mm, min. winding diameter: 3 inches, max. winding diameter: 1500mm. 11) Edge trim remover Hepp-Schwamborn. 12) X-ray measuring instrument Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation is available. On-site inspection is possible. Expected to be available from the end of March 2026. Ijdpfx Aleymfc Aocoat

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Iasdpfx Aochuvrjlcjt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Sistem: • Hexagon, Absolute Arm, 8340, 7 Sumbu • Kit RS6 • CP-C Terpasang • Basis Magnetik dengan Cincin Pemasangan Iasdpjymnvrofx Alcot • Standar Panjang Bersertifikat – 1016 mm (40 inci) • Kit Leap Frog Komputer & Perangkat Lunak: • Lisensi Inspire Single Seat • BendingStudio TUBE • BendingStudio CAD Wizard

Kondisi: bekas, Tahun pembuatan: 2008, Tragfähigkeit / kg Load capacity / kg Abmessungen / mm Dimensions / mm Eigengewicht / kg Dead weight / kg Technical Data Manufacturer: BÜTER Hebetechnik Model: HA 05-50 Year of manufacture: 2008 Load capacity: 500 kg Dead weight: 3,700 kg Lifting height: 4,842 mm Overall height: 1,222 mm Platform size: 3,000 mm x 700 mm Lifting time: approx. 30 sec Lowering time: approx. 30 sec Permissible ambient temperature: -10°C to +40°C Power supply Motor: 400 V, 50 Hz Rated current: IN = 10 A + 4.5 A Iajdpfxotmyq Ho Alcet Connected load: 4.0 + 1.5 kW Control voltage: 24 V IP rating: IP54 Operating pressure platform lifting: 182 bar Pressure relief valve setting: 218 bar Pump capacity: 12 l/min Operating pressure frame lifting/lowering: 36 bar Pressure relief valve setting: 50 bar Pump capacity: 3.1 l/min Hydraulic oil type: HLP 32 TÜV inspection valid until 07/2024 User manual available!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin tenon merek SAUTEREAU dalam kondisi prima Iajdpfx Alex U U Irocjt

Tahun pembuatan: 1999, Kondisi: bekas, Drehbankzubehör_ja_VDI20_Paket_3 Iajdpfxohr Sv Te Alcjt

Kondisi: bekas, Description: General: Table dimensions: 1,500 x 1,000 mm Max. clamping force: 500 kN Max. load capacity of upper plate: 2,500 kg Max. load capacity under plate: 7,000 kg Iaodpfx Alswx T Ufecot RG version: Plate extendable and tiltable Repeatability: +/- 0.04 mm

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt Isdpegbkkrofx Alcjat - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: sangat baik (bekas), Clamping plate with T-slots Diameter 485 mm Pitch circle diameter 118 mm Hole spacing 170 mm Isdpfjfm Tq Tex Alcsat