Beli Bramidan Baler bekas (251)

Kondisi: bekas, jarak tempuh: 70.747 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 07/2021, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 09/2026, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, lebar bukaan pengisian: 920 mm, panjang bukaan pengisian: 1.600 mm, Halo, saya menjual baler saluran Paal Comdec yang berfungsi penuh. Mesin telah diservis dan dalam kondisi teknis yang sangat baik. Mesin dilengkapi dengan konveyor sabuk. Pada tahun 2025, sabuk konveyor telah diganti. Hedpfxoyk Uzps Aanjnl

Kondisi: baik (bekas), Dijual mesin press bal merek Kienzle, model Robust 6. Mesin ini bekas namun dalam kondisi berfungsi dan berjalan dengan baik. Sangat cocok untuk usaha kecil, gudang, atau industri untuk memadatkan karton, plastik, dan material kemasan. Detail: • Produsen: Kienzle • Model: Robust 6 • Kondisi: bekas, berfungsi penuh • Penggunaan: karton, plastik, kemasan Press ini dibuat kokoh dan andal untuk penggunaan harian. Terdapat tanda-tanda pemakaian normal, namun secara teknis tanpa masalah. Inspeksi dan pengetesan di lokasi bisa dilakukan. Mesin siap pakai dan tersedia segera. Hnsdpoy Ez Rzofx Aansl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-wiring (9-fold tying system). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER -Total length: 9700 mm -Total width: 3700 mm -Transport width: 2300 mm -Height including hopper: 3640 mm -Total weight approx.: 24 t -Ground pressure approx. 5 kg/cm² -Heaviest component weighs approx. 6 tons HOPPER OPENING -Length: 1600 mm -Width: 1200 mm -Inspection door (glass) PRESS CHAMBER -Plunger stroke length 2600 mm -W x H: 1100 x 770 mm -Volume 2.2 cbm -The plunger runs on heavy-duty rollers and is equipped with knives for cutting off residual material. -The pressure in the press chamber (channel), with two side cylinders and a simple lever system, allows for regular and uniform force distribution. HYDRAULIC EQUIPMENT -Siemens electric motor, 4-pole, 400V-50Hz, 30 kW -Hydraulic pump (Bucher) constant/peak: 320 / 400 bar -Max. operating pressure: 290 bar -Denison hydraulic valves, 24 VDC -Pressure control with proportional valve cycle -Automatic oil temperature monitoring -Automatic oil filter monitoring -Automatic oil level monitoring -Oil volume: 600 l -Max. pressing force: 740 kN / 74 t -Specific pressure: 87 N/cm² SYSTEM THROUGHPUT -Volume per press stroke including pre-compression: 1.76 cbm -Average pressing cycle duration approx. 40+8 sec -Press cycle duration without material: 22+8 sec -Tying time: 30 sec -Theoretical volume without tying: 1.84 m³/h -Average working volume: 123 m³/h -Capacity at material density of 30 kg/m³: 3–4 t/h BALES -Bale length: 500 – 2000 mm -Bale width: 1100 mm Hnsdey Ayiqspfx Aanel -Bale height: 770 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 290/02, Fungsionalitas: berfungsi sepenuhnya, de Hnsdpfeyghhhox Aanjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, Hsdpfsyz Af Ejx Aanenl We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 97020-0010, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, daya: 45 kW (61,18 hp), tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, Mesin press bal ini dijual oleh Bollegraaf Recycling Solutions. Ini adalah mesin press bal HBC80 (45kW) dengan tali silang sebagai salah satu fiturnya. Hsdpfxexvh Dye Aansnl Tahun pembuatan mesin press bal: 1997 Mesin press bal Bollegraaf HBC80 45 kW Dimensi bal: 1100*720 mm Motor utama 45 kW Corong perantara Saluran masuk sabuk Panel kontrol Schneider PLC

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 48 h, MG 50 TVE VERTICAL HYDRAULIC BALER Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h, designed for compacting and baling soft waste materials such as glass wool mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber. Both the material loading door and the bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and is equipped with a 10-meter extension to allow remote positioning away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and guided by four lateral sliding guides. Material loading is carried out from the front. The compaction cycle (down and up movement of the compactor) is automatic and activated by a button. - For transportation, the machine will be delivered in three parts: one 2000 mm high, one approximately 2300 mm (the cylinder, to be assembled onsite). - The bale tying system is preset type, performed with doors open and tied manually. Using the slots at the back of the chamber, the bale can be tied with standard pre-cut wire or strapping. - Bale extraction from the machine is performed using a forklift, with dedicated channels at the base allowing insertion of the forklift tines. - The bale discharge door is secured with a handwheel, ensuring safe opening even with elastic materials. A microswitch ensures the door is fully closed before pressing. The upper door is fitted with a hydraulic lever closure with onboard controls. - Can be positioned flush against a wall; requires only frontal space for loading and bale extraction. - The hydraulic system is fitted with a safety block valve to prevent press fall. - The machine must be anchored to the floor and is installed above a collection tray for washing liquids. Technical Specifications: • Brand / Model: MG 50 T.V.E. 1200x1100x3500H • Pushing force: 50 tons • Material pressing force: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material Hedjyzr Nmjpfx Aanjnl • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm (height) • Compactor stroke: 2700 mm, single extension • Operation: Automatic, push-button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Forklift extraction • Hydraulic power unit: Integrated into the press • Motor power: 10 HP / 7.5 kW • Supply voltage: 380 V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm (H) • Noise level: 78 dB • Press weight: approx. 5,000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 15.547 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W99-031.010, gaya penekanan: 60 t, tekanan: 250 batang, daya: 30 kW (40,79 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Mesin press baling bekas ini dijual oleh Bollegraaf Recycling Solutions. Ini adalah baling press tipe HBC60 (30kW) dengan pengikatan vertikal. Mesin press baling ini dapat dilihat di bengkel revisi kami. Hnsdpfx Aaeyux Nxjnjl Mesin baling ini hanya memiliki 15.547 jam kerja. Kondisi teknis sangat baik! (mesin hanya digunakan untuk mempress kertas) Press ini dilengkapi dengan opsi berikut: * corong tengah + distributor * saluran masuk sabuk * saluran keluar bal * rak gulungan kawat

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 12 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 630207349, HSM V-Press 825 Plus Pro – hampir tidak terpakai, hanya 16 bale yang telah dipres Hnjdpfx Aajyy Ddasnsl Dijual HSM V-Press 825 Plus Pro dalam kondisi sangat sedikit digunakan. Mesin ini hanya menghasilkan total 16 bale, sehingga kondisinya nyaris seperti baru. Ideal untuk perusahaan yang mencari mesin press bale berkualitas tinggi tanpa harus membayar harga untuk mesin baru.

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.850 h, gaya penekanan: 88 t, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 De balenpers betreft een VK 88 R – FU, uitgevoerd met frequentieregelaars, 2 x 45 kW motoren. * Optie voor ontblokkeer-cilinder * Kogelgewrichtbevestiging hoofdcilinder * Stadler transportband, 1600 mm intern Bouwjaar: 2012 Totaal draaiuren: 11.850 De stang van de hoofdcilinder en het afdichtingsset zijn recent vernieuwd. Te vervangen: 2 voorste vloerplaten van de perskamer: midden en voorkant van het kanaal Smeren/vervangen: Enkele zijdelingse diabolorollen zijn gebruikt en in bedrijf; sommige zijn roestig, sommige in goede staat. De pers draait naar behoren en het knopen van de balen gaat goed. Aandrijfwielen ram: OK Zijwielen ram: OK Hoofdcilinderstang: vrijwel nieuw Hsdpfeyuyg Sex Aanonl Hoofdcilinder afdichtingsset: vrijwel nieuw Ram zijnylon strips: 80-90% in goede staat. Fijnafstemming geometrie mogelijk door toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes/tegenmes: goed, ca. 70% Naaldrollen: in orde, maar vervangen is aan te raden + de afsluitplaten Hoofdfrequentieregelaar 1 van 2: Totaal 2 x 45 kW: één van de twee is defect. Het is niet bekend of deze vervangen wordt. De pers draait momenteel op één pomp. Zijwanden perskamer: Zijwanden zijn versleten ter hoogte van de nylongeleidingsplaten: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt en vertonen lichte speling. Smering ontbreekt, maar zijn nog in goede staat. Geleidingsstrips zijn in orde. Opvoerlatten zijn vrijwel geheel versleten. Start/stop via frequentieregelaar. Zijwanden zijn goed op het schuine gedeelte en in de put. Draadrollenplatform: niet inbegrepen.

Kondisi: bekas, Tahun pembuatan: 2013, gaya penekanan: 40 t, Pabrikan: HSM Tipe: HL 4010 Re Tahun pembuatan: 2015 Gaya penekanan: 40 t Hsdpfx Aeyq Ngtoansnl

Kondisi: baik (bekas), Tahun pembuatan: 2012, Pra-penghancur bukan bagian dari penawaran (bagian atas). Hanya bagian bawah yang ditawarkan. Mesin Press Kertas / Press Baler PRESTO CC 40 V Produsen: PRESTO GmbH & Co. KG Hedoyrt T Tspfx Aanjnl Tipe mesin: CC 40 V Nomor mesin: 28074 Tahun pembuatan: 2012 Berat kosong: 4200 kg Tekanan operasi maksimum: 260 bar Kelas perlindungan: IP55 Pengarus nominal: 30 A Tegangan nominal: 400 V, 50 Hz Daya nominal: 15 kW Koneksi listrik: 35 A gG Tipe mesin: press baler horisontal untuk kertas dan karton

Tahun pembuatan: 2011, Kondisi: bekas, Year of manufacture: 2011 Condition: good Hjdpfx Ajk Nmnfjanjnl Paper baler

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-1100 waste compactor is ideal for compacting your 1100 L waste and recycling containers. It efficiently and safely reduces voluminous waste and recyclables to a minimum of their original size. By compacting these waste and recyclables, you achieve a volume reduction of up to 75%, significantly lower your disposal costs, and create a safe and clean working environment. Pressing force: 3.5 tons Hnjdpfx Aaen Argienol Compaction: up to 75% (material dependent) Machine dimensions: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Pressing time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two-hand lever operation Optimal use of waste containers Reduces the number of waste containers needed No need to climb into waste containers Reduces the frequency of waste collections A quality product "Made in Europe" Suitable for compacting Residual waste Recyclables Paper and cardboard Green waste Light packaging materials Additional options Annual maintenance with UVV inspection Machine color according to RAL Machine galvanized Compaction plate for 660 and 770 L containers Power supply 380 - 400 V (3 phase) Baling press, paper press, waste paper press, cardboard press, packaging press, film press, paper baler, waste baler, waste press, recyclable press, waste compactor, waste press, residual waste press

Tahun pembuatan: 2026, Kondisi: baru, The BTS film compactor is the ideal solution for keeping troublesome and bulky packaging film waste under control. With its compact footprint and stable design, all film waste can be effortlessly reduced to a fraction of its original volume. The retention ring inside the compactor prevents annoying expansion, ensuring the film stays securely in place. Filled film collection bags can then be compressed into bales using a baler or disposed of in a recycling container. By compacting these waste or recyclable materials, you achieve up to 90% volume reduction, substantially reduce your disposal costs, and properly return the material to the recycling process. Film Compactor Dimensions: 1000 H x 450 W x 420 D mm Weight of Compactor: 5.5 kg Colour: RAL 9006 Silver Film Sack Volume: 240 litres Maximum Filling Weight: up to 15 kg Key Features: - Simple collection of packaging films - Clean and safe work areas - Retention ring prevents nuisance material expansion - Optimal utilization of waste bags - Reduces the frequency of waste pickups and therefore disposal costs - A premium quality product "Made in Germany" Suitable for compacting: - Films - Foam films Optional Accessories: - BTS film sacks 240 litres - Custom compactor color (RAL color chart; from order quantity 40 units) Hsdpfx Ajdzvhwsansnl - BTS baling press for films Keywords: film compactor, compaction stand, film collector, film disposal, recyclable material collector, recycling collection sacks, recycling bags, recycling sack

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-240 waste compactor is ideal for compacting your 240 L waste and recycling containers. It allows bulky waste and recyclables to be compacted quickly and safely to a minimum of their original size. By compacting these materials, you achieve a volume reduction of up to 75%, significantly lower your disposal costs, and ensure a clean and safe working environment. Hsdpfx Aaebqg Rfonjnl Pressing force: 2 tonnes Compaction: up to 75% (material-dependent) Machine dimensions: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (as required) Press cycle time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Maximum utilization of waste containers Reduces the number of required waste bins No need to climb into waste containers Reduces frequency of waste collections A quality product "Made in Europe" Suitable for compacting: General waste Recyclable materials Paper and cardboard Green waste Lightweight recyclables Optional extras: Annual maintenance including safety inspection (UVV) Machine color according to RAL AUTO control with automatic press cycle and E-stop with key Pressing insert for waste bags Waste compactor, waste press, refuse press, general waste compactor, baler, cardboard press, paper baler, plastic film press, recyclable compactor, waste baler, general waste press

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 9.000 h,

Kondisi: bekas, Model: Baler HSM V-press 1160 plus Tekanan (kN): 59 Kapasitas (bale/jam): 1-2 Hjdpfxev Al Tie Aanjnl Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi (p x l x t, mm): 1780x1150x2985 Daya (kW): 4 kW Berat (kg): 2300 Tahun pembuatan: 2018-2019

Kondisi: baik (bekas), HSM 155.1 VL baler Pressing force: 18 tons Specific pressure: 2.33 kg/cm² Theoretical performance: 3 bales/h, i.e. approx. 500 kg/h Bale dimensions: 1100 x 700 x 800 mm Bale weight: 150–250 kg Power supply: 400 V / 4 kW Hnsdov Alacjpfx Aanel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening (W x L): 970 x 1,800 mm Bale dimensions (W x H x L): 1,100 x 750 x 600–2,000 mm Maximum bale weight: up to 700 kg or 800 kg, depending on material The baler feed system comprises the following components: - 1 fully enclosed STADLER chain conveyor with corresponding shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire spool carts - 1 multi-control unit for the baler - Complete engineering documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Hnodpfx Asygud Asansl Weight: 33,000 kg Binding type: Wire Suitable materials: plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The plant is operational and can be inspected during operation. The machine will be dismantled on 16th February and can then be inspected at our premises. Available immediately!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 2.400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R40410, daya: 371,43 kW (505,00 hp), berat kosong: 75.000 kg, gaya potong: 900 t, Presse shear COPEX model REFLEX 900 ton diesel mobile (tahun 2023). Perawatan dilakukan oleh produsen. Kapasitas: 10 hingga 22 t/jam tergantung jenis scrap yang akan dipotong. Tersedia segera. Hnedpfx Aajxg Ekfensl

Kondisi: bekas, Tahun pembuatan: 2001, Die Cutting Machine Titan MLF 170 Year: 2001 Hnodpfx Asyu N R Hsansl Robust construction with precision-ground and chrome-plated cutting bed Complete with safety guards and operator panel Electrical and hydraulic systems in good condition Cutting bed with both cold and hot processing system CE certification Feeder / Pile Turner Zenari Engineering Model: MettilevaFogli MLF 170 (2002) Automatic pile feeding system Hydraulic lifting and transfer system with rollers Adjustable speed and pile height control Specifications: Maximum sheet size: 1200 x 1700 mm Minimum sheet size: 500 x 700 mm Cutting force: suitable for heavy board and corrugated cardboard Automatic feeder (Zenari MLF 170) Die cutting press (Titan MLF 170) Discharge system with roller conveyor Safety devices: full safety enclosure and operator access controls Fully equipped and in good working condition Can be inspected in production Serviced and regularly maintained

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 16,92 kW (23,00 hp), jenis bahan bakar: bensin, tipe perpindahan gigi: hidrostatik, Tahun pembuatan: 2024, jam operasional: 75 h, Agria 5900 Taifun Professional Hydro Tool Carrier Technical Specifications: Kawasaki 2-cylinder, four-stroke petrol engine, 23 hp, with electric start Transmission: Stepless hydrostatic drive with single-plate dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0-3.6 km/h Handlebar: Rubber-mounted, tool-free height and side adjustment Steering: Power steering (handlebar-active steering) Tyres: 23 x 8.50 - 12 agricultural tread Standard features: Tyres, service and parking brake, hour meter, hand start, electric starter, power socket Fuel: Unleaded petrol Weight: approx. 221 kg Key Features: - Intuitive steering with minimal effort thanks to handlebar-active steering - Patented easy-control operating unit for intuitive operation - High-performance professional engines ensure ample power for all attachments - Portal axle for shifting the centre of gravity depending on ground conditions and attachment used - Excellent visibility even in poor lighting conditions thanks to LED safety lights - Standard support stand for convenient parking without an attachment - Hydraulic safety valve: secure hold even on steep slopes - Optimised air intake reduces the uptake of dirt and dust - Central parking brake - Stepless hydrostatic drive for perfect adjustment of working speed - Robust, low-maintenance construction for continuous use under the toughest conditions Hsdev Ecdkepfx Aanenl - Standard hour meter - Agria mounting flange for positive and friction-locked connection between base unit and attachment - Powerful engines guarantee fast work with professional attachments - Easy to move the machine even when the engine is off by releasing the wheels Possible Attachments Grassland maintenance: Mowing, mulching, baler and band rake Soil cultivation: Reverse tillers, harrows Property and pathway maintenance: Weed removal, snow clearing, snow blower, spreading, sweeping Woodland maintenance: Branch wood chippers This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has approx. 75 operating hours and has been used as a demonstrator to date. The Cyclone is in excellent overall condition with minimal signs of use and is immediately ready for work. Sale as a used machine with no returns, warranty or guarantee. Net price: €18,479 // Gross price: €21,990 - Viewing / test drive available upon request - Nationwide shipping for €180 via freight carrier! - Financing / leasing options can be tailored to your needs!

Tahun pembuatan: 2025, Kondisi: baru, RS-9 was specifically designed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine being operated. Hsdpfx Aoiklxbeansnl The shredder allows fast and safe shredding of paper, which is taken directly from the die-cutting machine, to enable easy transport to the baler via a conveyor system. The RS-9 shredder is designed for shredding waste from a die-cutting machine for easy transport via a belt conveyor system. Our shredder is very easy to operate. It features Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 offers the ability to retract the shafts, which ensures operator safety and extends the device’s service life. The machine is equipped with a frequency inverter enabling soft start and motor operation control. Feel free to contact us.