Beli Demag Spurbreite Bis 163 Mm bekas (80.151)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level. Klodpfx Aemhhf Sjfier

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Kjdjmhhl Hjpfx Afijlr Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Kodpomidyfjfx Afislr Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm Ksdpfx Aomkixwefislr - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. Klodpfxsmhh Dts Afior The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 1.000 kN, sch-01 Kledpfxex Tdp No Afier

Kondisi: bekas, Elektrik Hoist Rantai DEMAG Tipe PK1N-F No. Seri: 1498030 Kapasitas angkat: 125 kg Ketinggian angkat kait: 4 meter Jarak gantungan ke kait beban: 410 mm Kecepatan angkat: 8 m/menit Kecepatan angkat halus: 2 m/menit Klodpfxsyy Df Rj Afisr Panjang kabel kemudi sekitar 1,1 meter Sambungan listrik: 380 Volt, 50 Hz 1 jalur beban = 125 kg - Tombol berhenti darurat Berat: 20 kg kondisi baik

Kondisi: sangat baik (bekas), DEMAG Hoist Rantai Tipe PK 2N-F Nomor stok (1221) Kapasitas angkat 500 kg Kedpfsyy S Tiex Afijlr 2 kecepatan angkat 5/1,25 m/menit 380 Volt 2,2 /1,5 Ampere Tinggi angkat 4,5 meter

Kondisi: sangat baik (bekas), pl-hu-001 Klodpfxexmt Eqs Afisr

Kondisi: sangat baik (bekas), Dijual pelat pemasangan/meja mesin yang kokoh dengan alur T. Terbuat dari konstruksi baja berdinding tebal, dicat biru. Basis ideal untuk pemasangan komponen besar, perlengkapan, atau untuk aplikasi pengukuran dan pemesinan. • Dimensi: 2570 x 770 x 200 mm • Permukaan dengan alur T • Bagian atas dikerjakan secara presisi Kjdpfxew Rdtuo Afielr • Berat: 900 kg • Dapat diangkut atau dimuat dengan forklift

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 57.628 h, gaya penjepit: 800 kN, diameter sekrup: 35 mm, berat injeksi: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. Featuring a clamping force of 800 kN and a screw diameter of 35 mm, it is suitable for processing various materials including PA, PP, PE, and ABS. The machine comes equipped with a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine DEMAG SYSTEC 80/420-310, which we are offering for sale. Please contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar spacing: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total PLC operating hours: 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycles: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz Kjdpfxsyyyuuo Afislr • Current: 114 A • Maximum pressure (Pmax): 235 bar • Maximum flow rate (Qmax): 104 l/min • Minimum mould installation height: 300 mm • Maximum distance between platen mounting surfaces: 750 mm • Availability: mid-2026 Additional equipment • Wittmann linear robot (handling/automation) • Gravimax 14R gravimetric blender • TORO Systems material loader

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, gaya penjepit: 1.500 kN, diameter sekrup: 45 mm, berat injeksi: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. Featuring a clamping force of 1,500 kN and a screw diameter of 45 mm, it is suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a shot volume of 358 cm³. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic DEMAG ERGOTECH 1500-840 that we have for sale. Please contact us for further details. • Shot volume: 358 cm³ • Processed materials: PA, PP, PE, ABS, etc. • Barrel temperature: up to 450 °C • Maximum pressure: 190 bar • Maximum flow rate (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of manufacture: 1999 • Availability: mid-2026 Kedpfx Aeyyyn Ujfielr Additional equipment: • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1,200 mm • Z-stroke: 2,000 mm • Weight: 300 kg • Wittmann W633 • Robot no.: W633 • X-stroke: 500 mm • Y-stroke: 1,400 mm • Z-stroke: 2,000 mm • Weight: 475 kg • Wittmann W743 • Robot no.: W743 • X-stroke: 1,200 mm • Y-stroke: 2,000 mm • Z-stroke: 4,000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Kondisi: baik (bekas), de-hu-hu-20240621-1 Kodpfoxzqp Ajx Afiolr

Kondisi: bekas, 1 Klsdpfx Afsxzq Sqeisr

Kondisi: baru, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Ksdpeh Dv Uqjfx Afijlr Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Connector: G.E. - 3 Clear span: 2,700 mm Weight / pc.: approx. 15.026 kg Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against accidental lifting General information about the item: This item is offered for collection only. Any desired transportation or shipping of this item will incur additional costs, which can be quoted separately depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly and installation Our general installation terms apply Racking inspection Inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our in-house fleet (without unloading)

Kondisi: bekas, Murah dari pembubaran perusahaan Klodpfxsyyarmj Afisr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, gaya penjepit: 5.000 kN, diameter sekrup: 70 mm, berat injeksi: 1.230 g, el Ksdpjyycu Defx Afielr

Kondisi: bekas, pl-hu-001 Kodoyw Ubqspfx Afijlr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, en Kodox Tdwyspfx Afielr

Kondisi: bekas, Tahun pembuatan: 1978, de-hu-it-lt-001 Kodpfx Asu Szhpsfielr

Tahun pembuatan: 2025, Kondisi: baru, de Kledpfx Afjgd Uifsisr

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: +5°C to +45°C for temperature testing Test chamber volume: approx. 1300 L Simpac control system Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on modular construction. Individual modules can be added or replaced as required, allowing customization for different applications. They are suitable for plants with high light requirements such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Fresh air supply up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH: approx. 0.8 kW Performance data for climate testing under irradiation Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm Kedpfx Afsvz U Ereislr External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marked, on castors, very good condition Tube port ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Kondisi: bekas, 1 Ksdpfjyxg Swsx Afislr

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Mesin cetak injeksi hidrolik dari tahun 1999. DEMAG Ergotech 150-610 Viva ini memiliki diameter ulir 45 mm dan jarak bebas maksimum antar pelat sebesar 850 mm. Berat tembakannya 260 g dan tinggi pemasangan alat maksimum 250 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan DEMAG Ergotech 150-610 Viva yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Kedpfx Afoyxrt Toislr

Kondisi: sangat baik (bekas), Demag Crane Penarik P 3,2 ton - Kljdpfjyxbxxjx Afisr Tipe P208H11 Empat tali kawat Pengangkatan cepat dan halus Panjang 1150 mm Tinggi 350 mm Lebar 330 mm