Beli Geiger Felixliner bekas (260)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Nsdpfx Alet Hw D Rjkjla Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: SIEMENS SINUMERIC 840 C Nljdpfst Hw Rkox Alksa Total power requirement: 40 kW Machine weight: approx. 6,500 kg Space requirement: approx. m INDEX CNC Lathe with 2 turrets, bar loading magazine, workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture: 1998 # 810 728 _____ Bar capacity for bar machining: approx. 42 mm Workpiece swing diameter: approx. 400 mm Turning diameter for chuck work: 200 mm Turning length / distance between centers: approx. 400 mm Turret slide travels Z1 (longitudinal) / X1 (cross): 400 / 120 mm Turret slide travels Z2 (longitudinal) / X2 (cross): 400 / 105 mm Feed force for Z/X axes: 15 Nm Rapid traverse speed of tool carriers 1 and 2: 22.5 m/min Turret tool stations / max. speed: 14 x VDI 30 / 6,000 rpm Spindle speeds / driven tool speeds up to max.: 7,000 rpm Max. spindle torque: 95 Nm Spindle drive / driven tool drive: 20 / 5.5 kW Total drive power: approx. 40 kW - 400 V - 50 Hz Weight: approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis path control type SINUMERIC 840 C for the following axes: Turret 1 and Turret 2, C-axis, counter spindle axis and C-axis for the counter spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand control device • C-axis for the main spindle with automatic spindle indexing and positioning system • 1 counter spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loading magazine type MBL for bars up to 3 m length • Hydraulic chucking system on main and counter spindle • 2 x tool turrets with 14 stations for VDI 30 tool holders and 14 powered tool stations for milling and drilling operations, various tool holders, drill breakage control in the chuck area, ideal for cross drilling (!) • Workpiece handling system type WHU with linear gripper but without stacking system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system • Powered angle tools, approx. 20 pcs. total, etc. Condition: Good to very good – can be demonstrated under power Delivery: Ex stock – as inspected Payment: Net – payment due upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 #0836 _____ Max. wheel diameter 80 mm Module 1–3 Nsdpfx Alst Hw R Dekola Helix angle +/- 45° Distance table center to tool center 15–160 mm Vertical hob carriage travel 250 mm Shifting distance/tool traverse path 180 mm Min. number of teeth 3! Cutter diameter x length approx. 90 x 200 mm Cutter speeds up to max. 800 rpm Feeds in axial/radial/tangential directions 20/4/5 mm/rev Max. workpiece clamping length 250 mm Spindle drive approx. 8 kW Total drive approx. 30 kW – 400 V – 50 Hz Total weight approx. 7,500 kg Equipment / Special features • SIEMENS CNC control type 840 C for 6 axes (i.e. hob drive/table drive/swivel angle of hob head/axial feed/radial feed/tangential feed), with gearing-specific operator interface and diagnostic functions for rapid troubleshooting. • With device for automatic threading of the hob into the tooth gap • Automatic shifting of the hob axis • Automatic component loading unit SSL = Rapid Swivel Loader using mechanical indexing gear and cam disk for quick loading times, with triple rotary gripper for loading blanks/processing position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feeding via plate chain conveyor (PKB) for workpiece transport with positive-fit workpiece carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete work area enclosure, intermediate coolant tank with pump Complete enclosure of the workspace with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Tahun pembuatan: 2001, Kondisi: bekas, Pressing force 148 t Material: carbide rods Process: extrusion process 0 T O K A I (Japan) Hydraulic extrusion press for carbide rods Model: TP 150 Year of manufacture: 2001 _____ Extrusion cylinder pressing force: 10 – 148 t Internal dimensions of pressure cylinder: 300 x 900 mm Stroke of pressure cylinder: 900 mm Stroke speed fwd./rev./extruding: 10/11/8 mm/sec Material cylinder tiltable up to: 60 (90)° Workpiece tablet dimensions: 143 x 800 mm Full workpiece table dimensions: 800 x 1,800 mm Adjustment of workpiece tablet support: 50 x 100 mm Nsdpfx Ajt Hw Snjlksla Hydraulic oil fill: approx. 400 liters Material cylinder heating: 7.5 kW Hydraulic pump: 11 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 6.0 t / machine height: approx. 3.30 m Equipment / Special features: • This machine is designed for the production of round or profile carbide rods via the extrusion process of heated, vacuum-treated carbide powder. • The entire extrusion group, including the working cylinder, can be swiveled so that the extruded workpieces (carbide profile rods) can be conveniently placed onto corresponding storage trays. These trays are mounted on a transport system and can be longitudinally and laterally adjusted by a stepper motor, with partial height adjustment as well. • The complete operating process can be preset and monitored via a conventional MITSUBISHI controller type A 1SJHCPU. Mobile control cabinet with display instruments for heating temperature, angle adjustment, vacuum pressure, and pressure stages. • 4 heating circuits: 1x for the extrusion nozzle and 3x for the material cylinder • Material cutting device • Vacuum pump for generating vacuum in the material area to prevent cracks and air bubbles. Various additional accessories included. Condition: good to very good – possibly ready for demonstration under power. Rare machine! Delivery: ex stock – as inspected. Payment: strictly net – upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24: INDEX (Germany) CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS) Model: G 300 Year: 1995 S/N: 5000 65 Technical Data: - Max. Turning Diameter (with chuck): 300 mm - Spindle Bore: approx. 90 mm - Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm - Max. Turning Length / Centre Distance: approx. 710 mm - Turret Slide Travel (Z axis / longitudinal): 710 mm - Turret Slide Travel (X axis / cross): 140 mm - Rapid Traverse Speed Tool Carrier: 20 m/min - Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories) - Feed Force X/Z Axis: 8/13 kN - Stepless Spindle Speeds: up to 5,000 rpm - Max. Spindle Torque at 100% ED: 275 Nm Nlodpfxet Hw Suo Alkea - Spindle/Tool Drive Power: approx. 28 kW - Total Power Requirement: approx. 40 kW, 400 V, 50 Hz - Machine Weight: approx. 6,000 kg Accessories / Special Features: • SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled. • Alignment and indexing device for the main spindle • Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm • INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch • KNOLL mobile chip conveyor with coolant facility and high-pressure pump • Front sliding door, otherwise complete enclosure. Oil skimmer This machine is ideal for shaft machining as well as for chuck workpieces. Very robust construction! (Please let me know if you need adaptations for other platform requirements or an export summary.)

Kondisi: bekas, Tahun pembuatan: 2001, EN-TRANSLATION-001 Nlodpet Hw Uiofx Alksa

Kondisi: bekas, Tahun pembuatan: 1982, Werkpiece weight 60 kg Workpiece length 700 mm Diameter 500 mm Total power requirement kW Machine weight approx. t Space requirement approx. m O F F E R We can offer you, subject to prior sale and errors excepted, ex stock: H O F M A N N Germany Horizontal electronically dynamic grinding wheel and worm grinding wheel balancing machine Type EO-Re / MC 10 Nledpfx Aljt Hxbqjkja Year of manufacture: 1982, modernized in 2008 and retrofitted with MC 10 control Software: MC 10 and measuring transducer PMG 81 _____ Balancing dimensions Ø 500 mm x length approx. 700 mm Test piece weight approx. 5 – 60 kg Balancing speed approx. 650 rpm Two planes, journal Ø 20 – 50 mm, agate prisms, drive via universal shaft. Achievable accuracy: 1 mmg/kg Further technical data can be submitted upon request. Weight approx. 500 kg Ideal machine for balancing grinding wheels Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. More than 300 good used machines in stock, please contact us for inquiries.

Kondisi: bekas, Tahun pembuatan: 1992, Grinding diameter - max. 0 mm Grinding length 0 mm Workpiece length 970 mm Total power requirement 12 kW Machine weight approx. 5 t Space requirement approx. m Nodpfjt Hwpajx Alkola Centre height with base 220 mm Centre distance/clamping length (without tailstock) 970 mm Table size 1,900 x 300 mm Upper table 1,500 x 160 mm X / Y / Z axis 750/320/320 mm Grinding head swivellable (B-axis) +/- 25° Grinding head rotatable about vertical axis (C-axis) 200° Speed range of R-axis (cylindrical grinding) 0-50 rpm Feed speed X / Y / Z axis 0.005 - 5 m/min Grinding spindle speeds, stepless 2,000 - 12,000 rpm Workpiece carrier mount 50 ISO Division possibility 1 - 999° Pitch options 0.5-10,000 mm Spindle drive/total drive 6/12 kW - 380 V - 50 Hz SCHÜTTE / NUM 760 CNC – Path control for 4+2 axes with BOSCH and SIEMENS components and screen, program input directly via keyboard in plain text or via external PC; free programming as per ISO/DIN for all workpieces; extensive archive of standard tool grinding programs available, combination programs, etc. C-axis as rotary table on the Z-axis column for rotating the grinding head 10-180-10°, lockable hydraulically B-axis as grinding head tiltable by motor +/- 25°, with hydraulic clamping B and C axis ideal for multiple grinding operations in an automatic cycle, e.g., flute grinding, hobbing cutter, peripheral grinding and face machining of workpieces, etc. R-axis for dividing and cylindrical grinding, manually rotatable and swivellable, hydraulic workpiece clamping 4+2 axis interpolation for finish grinding of complex straight-fluted and helical cutting tools, solid carbide tools, deep-hole drills, etc. Grinding spindle with stepless speeds (6 kW) and acceptance of grinding wheels left and right RENISHAW LP 2 probe on the grinding head for setting up and determining workpiece data Large coolant system with HD nozzle and POLO belt filter from 1999, oil mist extraction system Complete splash guard enclosure for working area with 3 doors (locked by CNC) 3 grinding wheel mounts, workpiece holder SK 50, reductions, etc. Probe insert SK 50 in conjunction with alignment arbor and grinding spindle reference standard.

Kondisi: bekas, Tahun pembuatan: 1998, Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 510 mm Total power requirement: 60 kW Machine weight approx.: 10 t Space requirement approx.: (value missing) CNC-controlled vertical machining center for bar processing. For 5-axis machining of complex shapes at any angle with highest productivity and precision, Model MC 535 SM Year of manufacture: 1998, # 535 1107 TECHNICAL DATA: Bar diameter/Profile size x max. length: 80 x 800 mm (!) Milling slide travel, longitudinal X-axis: 800 mm Milling slide travel, cross Y-axis: 500 mm Milling head travel, vertical Z-axis: 510 mm Workpiece axis, rotary/swivel: 360°/120° Mounting height under vertical spindle approx.: 350 mm Spindle taper: HSK 63 Spindle speeds, steplessly adjustable: 36–10,000 rpm Feed rates all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW – 380 V – 50 Hz Weight approx.: 10 t Accessories / Special equipment: Nlodpet Hwtfefx Alksa - CNC path control FANUC type 16 iM, for all 5 axes, with display, direct input, various sub-programs, tool corrections, tool monitoring, parallel programming and much more - Bar loader magazine left of the machine, up to 10 bars, each Ø 80 mm - Integrated CNC rotary/swivel unit with collet chuck device for bar feed in combination with hydraulic tailstock as counter support - Automatic tool magazine with 66 positions, Ø 125 x 300 mm length - Tools also possible with through-tool coolant, dedicated tool data management, chip-to-chip time 4 sec - Tool breakage monitoring via laser light barrier, etc. - Gripping and swivel unit to hold the workpiece during “cut-off milling,” separate it from remaining bar, and deposit finished parts onto a conveyor - Fully enclosed working area, built-in chip conveyor, but without coolant device - Workpiece probe system for part measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Kondisi: bekas, Tahun pembuatan: 2000, EN-2024-001 Njdpfx Aljtr Rq Tsksla

Kondisi: bekas, Tahun pembuatan: 2006, en-GB Nedjwp S Sdspfx Alkela

Kondisi: bekas, Tahun pembuatan: 2010, We can offer you, subject to prior sale and errors excepted, the following machine available ex stock, non-binding: B R Ü N I N G H A U S Air Cushion Machine Model: AP502 Year of manufacture: approx. 2010 Machine weight approx. 0.2 t Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Compressed air connection: NW 10/4 – 8 bar; max. 82 Nl/min (during cushion production); max. 3.5 Nl/cycle Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Film material: PA/PE composite film or 100% recyclable polyethylene film Weight: 230 kg Performance: 25–49 cycles/min (depending on film type and cushion size) Power connection: 230 VAC, 50/60 Hz, 16A Power consumption: 1.1 kWh Accessories / Special features: • Stored programs for different cushion sizes • Program change at the push of a button • Individual lengths from 4 cm to 16 cm with defined filling grade can be produced • 10 programs available for storing multiple parameters • Small footprint (1,600x767x1,292 mm) We would also like to point out that we also have similar packaging machines in stock on site if you are interested. Njdpfx Alswr Etyekjla Condition: Very good Delivery: ex stock – as inspected Payment: strictly net upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1992, Offer in progress! Njdpswh Uhfofx Alkela

Kondisi: bekas, Tahun pembuatan: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Nlodew Dvivepfx Alkja Machine weight approx. 0.5 t O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS III-S-PV Year of manufacture 1989 _____ Max. saw blade Ø 320 mm Cutting capacity: Tubes approx. 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm Note: Smaller cutting dimensions may apply for mitre cuts Up to max. 140 mm Blade stroke manually vertical approx. 200 mm Saw blade speeds 17–34 rpm Saw drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Saw carriage feed manually via long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip tray • Roller conveyor material infeed approx. 2,000 mm • 2 spare saw blades Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/frame/cold circular) saws in stock. Further sawing machines available at all times – please enquire with us.

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Nlodetzdyzopfx Alkea

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Njdpfx Ast Hw N Tslkela Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: bekas, Tahun pembuatan: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total power requirement 15 kW Machine weight approx. 6000 kg Space requirement approx. m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year of manufacture: 1977 Serial No.: 8687 _____ Wheel diameter min./max. 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swivels up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shift max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed rates: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment • Various milling programs selectable for climb and conventional milling, as well as radial / axial milling processes, possibly for worm milling • Universal milling head with shifting capability • Hydraulic workpiece clamping in the table and hydraulic tailstock Nodpfx Alot Hw Hxskola • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed adjustment, display for speed and amperage • Change gears, various accessories, coolant system * Very robust design Condition: Good – demonstration available soon Delivery: Ex stock - as inspected Payment: Upon receipt of invoice, strictly net

Kondisi: bekas, Tahun pembuatan: 1978, Spindle diameter: 105 mm X-travel: 1,250 mm Y-travel: 1,000 mm Nlsdpfet Hwtxex Alkoa Z-travel: 600 mm Table length: 1,100 mm Table width: 900 mm Spindle taper: ISO 50 / Morse taper Total power requirement: kW Machine weight approx.: t CNC table-type boring mill Year of manufacture: 1978 Overhauled: 2002 BOSCH control: CC 300

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Nodpfx Alst Hwwdoksla Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: bekas, Tahun pembuatan: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 Total power requirement 70 kW Machine weight approx. 11,000 kg Space requirement approx. m DECKEL MAHO Vertical Machining Center with linear drive technology and portal construction for highest precision, Model DMC 75 V linear Year of manufacture: 2005 # 27 298 48 Working area: Longitudinal travel X-axis 750 mm Vertical travel Z-axis 600 mm Cross travel Y-axis 560 mm Clamping surface 950 x 650 mm Max. table load approx. 1,000 kg Workpiece height (portal opening) max. approx. 610 mm Tool holder HSK 63 Spindle speeds 18,000 rpm Max. torque 86/130 Nm Spindle acceleration/braking time 3.2 s Rapid traverse/feed rate X/Y/Z-axis max. 90,000 mm/min Feed force XY / Z 11,000 / 9,500 N Axis acceleration X/Y/Z 15 / 12 / 18 m/s² Spindle drive power S1/S6 25/35 kW Total drive approx. 70 kW - 400 V - 50 Hz Weight approx. 11,000 kg Accessories / Special equipment: This machine type is a high-precision vertical machining center in an exceptionally rigid portal design with high axis speeds via linear drives. • HEIDENHAIN 3-axis CNC control model iTNC 530 with all common options, cycles and subprograms, control cabinet attached. • 30-position disc-type tool magazine (max. tool Ø 100/140/200 mm x max. length 300 mm, max. tool weight 10 kg, tool-to-tool time 6 s, with tool breakage monitoring) • BLUM receiver for RENISHAW touch probe, but no touch probe supplied • KESSLER spindle with spindle cooling, separate cooling unit for linear drives • KNOLL coolant system and scraper-type chip conveyor and pump • Fully enclosed work area with 2 sliding doors, table easy to load, with rotational window. Nlsdpjt Hw Trjfx Alkoa Spindle operating hours approx. 23,000 h Presumably without ICS (internal coolant supply) Condition: Very good - ready for demonstration shortly. Delivery: Immediately available, ex stock Payment: strictly net - upon receipt of invoice

Kondisi: bekas, x-travel 600 mm Nlodpfjwqrxmox Alkja y-travel 400 mm z-travel 500 mm Total power requirement 6 kW Description to follow!

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools Nedpfju U Sabox Alkela • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: bekas, Offer in progress! Nljdpfjwh Ug Usx Alkea

Kondisi: bekas, ALZMETALL Sturdy Column Drilling Machine Type AB 5/S Year of manufacture: approx. (1983) Serial number: 183 Drilling capacity in steel (diameter): 60 mm Throat depth: 400 mm Power requirement: 4.4 kW Machine weight: approx. 1.7 t O F F E R We can offer you the following machine without obligation, subject to prior sale and errors excepted, ex stock: ALZMETALL Sturdy Column Drilling Machine Type: AB 5/S Year of manufacture: approx. (1983) Serial number: 183 Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 65 mm Spindle taper: MK 4 Throat depth: 400 mm Column diameter: 220 mm Quill stroke: 240 mm 5 feed rates: 0.1/0.2/0.3/0.4/0.5 mm/rev Table size: 700 x 500 mm Table vertical adjustment: approx. 600 mm Table rotation around column: 360° Clearance height from lower table to drill spindle: 1,128 mm Spindle speed ranges: Speed range 1 (infinitely variable): 30 – 135 / 135 – 600 rpm Speed range 2 (infinitely variable): 60 – 270 / 400 – 1,250 rpm Total drive power: approx. 4.4 kW - 380 V - 50 Hz Weight: approx. 1,700 kg Accessories / Special Features: • Very robust column drilling machine Nsdpfxswftt Io Alkola • Automatic quill feed with depth stop and cut-off • Table size approx. 700x500 mm • Quill travel with adjustable depth stop Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. Further pillar and column drilling machines always in stock, please contact us for details.

Kondisi: bekas, Tahun pembuatan: 1997, Maximum wheel diameter: 215 mm Wheel width: 40.65 mm Module - max.: — Total power requirement: 20 kW Machine weight approx.: 10 t GLEASON (USA) CNC grinding machine for spiral and hypoid bevel gears Model: PHOENIX HG 200 Year of manufacture: 1997 --- Max. external workpiece diameter: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth range: 5 - 200 Max. gear ratio: 1:10 Grinding wheel diameter: 51–190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel offers advantages in terms of heat development and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured cost-effectively, at high quality and with consistent accuracy, featuring short setup times. For further details, refer to the brochure copy on our website. Condition: very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Additional gear cutting machines available from stock at all times. (Key dimensions repeated for completeness) X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. Nlodst Hwxhjpfx Alksa • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel …