Beli Kraussmaffei Ipul Pultrusion bekas (319)

Kondisi: baik (bekas), Tahun pembuatan: 1997, jam operasional: 92.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, berat keseluruhan: 6.300 kg, Krauss Maffei KM125-520 C1 injection moulding machine for sale. Includes SEPRO robot. Equipped with shut-off nozzle and Stäubli quick-clamping system. Clamping unit: Clamping force: 1,250 kN Podpfx Aew Hyd Nodiopw Max. mould opening force: 70 kN Travel force, moving platen open: 35 kN Travel force, moving platen close: 28 kN Mounting platen (H x V): 745 x 770 mm Clear space (H x V): 470 x 470 mm Mould opening stroke: 600 mm Minimum mould installation height: 300 mm Opening width: 900 mm Ejector stroke: 150 mm Ejector force, forward/back: 22/10 kN Injection unit: Screw diameter: 40 mm L/D ratio: 23 Injection pressure: 2377 bar Stroke volume: 217 cc Shot weight (PS): 198 g Injection flow rate: 126 cc/s Screw speed: 307 rpm Electrohydraulic equipment: Pump motor rated power: 18.5 kW Installed heating capacity: 13 kW Cylinder heater control zones: 5 Oil fill: 345 l Dimensions and weight: Installation space approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6,000 kg Max. mould weight: 1,485 kg If you have any further questions, please feel free to contact us at any time.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Penahan cetakan untuk pengolahan poliuretan, penahan cetakan universal yang dapat diputar, kondisi baik hingga sangat baik, termasuk pengendali dan unit hidrolik, area penjepitan sekitar 1250 x 1400 mm, langkah paralel 200 mm, dengan pelat tengah lebih banyak, namun tidak termasuk dalam penawaran, lebar bukaan 897 mm, sudut putar 40°, dimensi t x l x p 2410 x 1863 x 3310 mm, pengamanan melalui sensor cahaya, inspeksi dapat dilakukan dengan janji, gambar teknis dan data teknis lainnya tersedia atas permintaan. Ppodpsxqmnaofx Adisw

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 Pjdeud H Dmopfx Adiepw - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Mesin cetak injeksi langsung dari produsen! Kami sebagai produsen KraussMaffei menawarkan mesin stok kami yang telah diperiksa dan fleksibel: Seri CX yang sepenuhnya hidraulik menawarkan mesin dua pelat yang sangat ringkas, efisien, dan fleksibel. Desain dua pelat yang sangat ringkas dengan sistem penguncian yang menopang sendiri menawarkan ruang yang luas untuk peralatan periferal dan aksesibilitas yang sangat baik. Manajemen energi yang efisien dan cerdas dengan penggerak servo BluePower juga memberikan dasar yang kuat untuk tuntutan tertinggi dan solusi yang tepat untuk setiap aplikasi. DATA TEKNIS: KM 80 / 380 CX G06 (Pesanan 38655610) SISTEM KONTROL  MC 6 dengan layar warna TFT 21,5" dengan fungsi multitouch UNIT PENGUNCI  Gaya penguncian kN 800  Gaya pembukaan cetakan, maks kN 55  Jarak bebas (t x v) mm 470 x 420  Pelat pemasangan (t x v) mm 670 x 670  Tinggi pemasangan cetakan min. - maks. mm 400 (ditingkatkan 150 mm)  Jarak pembukaan mm 900 (ditingkatkan 150 mm)  Langkah pembukaan cetakan maks. mm 500  Penggerak ejektor hidraulik  Langkah ejektor mm 150  Gaya ejektor maju/mundur kN 22,6 / 9,8  Kecepatan ejektor maju/mundur mm/s 760 / 800  Berat cetakan maks. kg 1000 UNIT CETAK INJEKSI  Diameter/Jenis sekrup mm 30 / Standar (dapat disesuaikan)  Rasio Ls/D efektif 26,7  Tekanan cetak injeksi bar 2500  Volume langkah cm³ 113  Berat cetakan pada langkah maks. untuk PS g 103  Kecepatan injeksi mm/s 100  Aliran injeksi cm³/s 71  Penggerak/kecepatan sekrup 1/menit 295  Aliran plastifikasi (Standar) g/s 12,3  Gaya sistem nozel kN 50 PARAMETER ELEKTRIK Daya koneksi kW 15,0  Daya pemanas terpasang kW 10,9  Catu daya V / Hz 380 / 50 3 Fase dengan kabel netral BERAT DAN DIMENSI  Berat bersih dengan kabinet kontrol ton 3,55  Panjang x Lebar x Tinggi m 3,96 x 1,48 x 2,02 PERALATAN TAMBAHAN  Plastifikasi tahan aus Ppedpfxoud N Hde Adiow  Isolasi penuh BluePower untuk silinder plastifikasi  Nozel terbuka  1 titik kontrol suhu tambahan untuk pemanas nozel  Katup udara 1 – arah (BWAP)  Pengontrol pneumatik untuk penutup saluran panas 1 - arah  Penggerak inti hidraulik 1 - arah (BWAP)  Antarmuka Euromap untuk penanganan E18, E63  Antarmuka Euromap (komputer pusat) E67, E77  Kontrol Proses Adaptif (APC)  Rangkaian cetak injeksi  Paket analisis grafis Mesin ini tersedia di pabrik kami di Parsdorf dan dapat dikirim dalam waktu singkat. Pilihan tambahan lainnya dapat ditawarkan sesuai permintaan. Kami menantikan permintaan Anda.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. Podpfxsuggb De Adiepw We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! Psdpfew U N Ixex Adiopw As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, 1 Ppedonh Rwgjpfx Adisw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm Ppsdpfsnh Rnuox Adisw - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Ppodpfxsuiykds Adijw

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Ppjdexx Uf Aopfx Adisw

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Two injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei KM 50 C1 - Year of manufacture: 1999 - Injection unit: SP220 - Screw diameter: 30 mm - L/D ratio: 23 - Injection pressure: 2500 bar - Shot volume: 85 cm³ - Machine dimensions (LxWxH): approx. 3200 mm / 1350 mm / 1800 mm Ppjdpjw Emybsfx Adisw - Weight: approx. 2500 kg - Control system: MC4 - Operating hours: approx. 86,000 h 2) Krauss Maffei KM 125 C1 - Year of manufacture: 2000 - Injection unit: SP520 - Screw diameter: 45 mm - L/D ratio: 20 - Injection pressure: 1878 bar - Shot volume: 217 cm³ - Machine dimensions (LxWxH): approx. 4500 mm / 1550 mm / 2200 mm - Weight: approx. 5500 kg - Control system: MC4 - Operating hours: approx. 82,000 h Documentation is available. On-site inspection possible.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions (X/Y): 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions (X/Y/Z): approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Includes Sepro handling system. Documentation available. On-site inspection possible. Ppsdpfx Adsw Hthzoiew

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), A total of 9 partially dismantled injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines include robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation available. On-site inspection possible. Pedpfxjugmx As Adijpw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, tekanan injeksi: 1.795 batang, langkah pembukaan: 2.100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 560 kN Movable platen drive force (opening): 89 kN Movable platen drive force (closing): 92 kN Mounting plate (H x V): 1,600 x 1,550 mm Clear opening (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Pjdpfjyv Acmox Adiopw Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow: 690 cm³/s Screw rotation speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump drive power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillation elements 1 x air valve Tie bar pulling device 3 x hydraulic core pull (BWAP) 2 x hydraulic core pull (FWAP) 20 x hot runner control zones Robot interface as per Euromap 67

Kondisi: bekas, Tahun pembuatan: 2006, Mesin injection moulding Krauss Maffei KM 800-4300 MX, tahun 2006 Mesin dilengkapi sebagai berikut: - 5 kontrol kaskade hidrolik - Unit injeksi dengan 90 - Sistem kontrol MT5 - Sistem penanganan Krauss Maffei - 2 sabuk konveyor Pedpfx Ajw Hwr Dsdispw

Kondisi: bekas, Tahun pembuatan: 2004, Krauss Maffei KM125-390 C2 (tahun pembuatan 2004) Gaya penjepit: 125 kN Ppodew D Rmiepfx Adiew Jam operasional: sekitar 63.000 jam Mesin dapat dilihat kapan saja

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Ppjdsw Hwthopfx Adiew

Kondisi: bekas, Tahun pembuatan: 1999, Mesin injeksi plastik Krauss-Maffei 800/5700MC tahun produksi 1999 untuk dijual. Data teknis tersedia berdasarkan permintaan. Ppedpfx Adeyg Hbgsisw

Kondisi: baik (bekas), Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Model: SPA 12/25 RP Pjdpfx Ashvml Dediopw Type: Hydraulic Power Unit Complete plant closure. Large selection of mezzanine platforms, pallet racks, shelving units, and vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. You will find more new and used items in our shop! International shipping costs on request!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Sekrup ø 90-36D, 45-30D, 45-36D Psdpfx Adeyilykeiopw Desain kompak, satu panel kontrol bersama, kapasitas sekitar 800 kg/jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Pedpfxeydp D Ee Adispw Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration/isolation elements - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Ppjdpfx Adsub S R Hjiew Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Ppjdex Hzzcopfx Adiow Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 105 mm, jarak antara tiang: 1.400 mm, volume langkah: 4.546 cm³, tekanan injeksi: 1.778 batang, berat injeksi: 4.137 g, injection_molding_machine_specs Podpex Hz I Nsfx Adispw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Mounting plate (H x V): 1600 x 1600 mm Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Ppsdsyb Sx Hopfx Adisw Cylinder heater control zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67