Beli Mesin Cetak Briket, Mesin Cetak Briket bekas (76.554)

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Csdegl Nlmopfx Akajgu Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang. Cgjdev Rpxlspfx Akasu

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale Cgsdpfx Aechqxxskasu -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Cgedpsxfwdsfx Akaju

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. Codpjfci D Aefx Akasgu -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Cgsdjgfm Ryepfx Akaou Prepared for connection to a cooling unit

Kondisi: baik (bekas), Good, used condition Cgsdpfx Ast Hxudekaou Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Mesin briket untuk serpihan aluminium atau baja Tekanan tekan sangat tinggi: 3.700 kg/cm² Corong besar: 600 x 1500 mm Ukuran briket: 60 x 40 mm Kapasitas: Serpihan aluminium – hingga 70 kg/jam Serpihan baja – hingga 180 kg/jam Serpihan kuningan – hingga 220 kg/jam *tergantung pada material awal dan pengaturan Cgodpfx Asw Ig Suskaeu Termasuk: - Bak emulsi - Pompa emulsi - Pendingin oli

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Csdpfod Su Hxex Akasgu Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Codpfxsffh Ato Akasgu Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baik (bekas), Data teknis: Mesin press briket dalam kondisi baik Tahun pembuatan: 2007 Uji teknis pada 06 / 2025 Cgsdpowtdk Tofx Akaju Briket silinder 80 mm Kapasitas hingga maksimal 150 kg/jam *hanya sekitar 3.949 jam operasi - Mesin press hidrolik: mesin briket dengan jalur keluar - Unit hidrolik: 4 kW - Tekanan: maks 300 bar - Dimensi transportasi: 1585/2140/H1940 mm - Berat: 1.370 kg Jaminan fungsi saat penyerahan Silakan menghubungi kami untuk uji coba gratis!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear Cgodpfxjd Nnwlo Akaou --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Cedpfofhql Tsx Akasgu Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% Cgjdpfx Aj E Dquskaou - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Kondisi bekas yang baik Jam operasi rendah (1675 jam). Motor: 11 kW Tekanan: dapat diatur hingga maksimal 250 bar Kapasitas aliran hingga maksimal 220 kg/jam Briket: 150x60 mm Dimensi mesin press: Codjwcc D Repfx Akajgu sekitar 2200x3000x1920 mm (PxLxT) Dimensi panel kontrol: 500x1250x2120 mm (PxLxT) Berat sekitar 3000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Arburg 221KS 250-75 / Universal Machine Year of manufacture: 1999 Injection unit: Screw diameter: 20 mm Shot weight: 26 g Injection pressure: 2350 bar Dosage volume: 31 cm³ Clamping unit: Clamping force: 25 t Tie bar spacing: 221 mm Platen size: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine – the injection unit can be operated vertically as well as horizontally Control system with air valve Core pull control Hardened, bimetallic injection unit Clamping bracket for the vertical mounting of the injection unit Dimensions: Weight: 1,150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pump/Motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW Cjdpfx Asy Smmhskasgu All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating Hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Injection volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control: CC 200 touchscreen Additional equipment: Production line with Engel Viper 12 Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. h in automatic mode Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Cgsdpfx Aoy Smmbjkaeu Main motor – servo motor with inverter – energy-saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Parallel movements Robot Engel Viper 12 Year of manufacture: 2012 5-axis robot: 3 axes driven by servo motors (electric): X, Y, Z; Axis B – pneumatic and axis C Touch control panel Safety package for robot Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of Manufacture: 2011 Csdpfx Ajy Sml Rokaogu Injection Unit: Screw Diameter: 45 mm Shot Weight: approx. 295 g Injection Pressure: 1,598 bar Dosage Volume: 318 cc Clamping Unit: Clamping Force: 80 t Tie Bar Distance: 0x0 mm Platen Size: 670x600 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Tie-barless machine Euromap 67 Robot Interface Hydraulic Core Pull x 3 Injection Unit hardened - Bimetallic Robot Engel Viper 12 Year: 2014 5-axis robot: 4 axes driven by servo motors (electric); axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at extra cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/Motor: 15 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker Year of manufacture: 2005 Injection Unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Metering volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Cgedpfxjy Smlwj Akasu Platen size: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional Equipment: Euromap 67 Robot interface Control with air valve One hydraulic core pull Hardened, bimetallic injection unit Sepro Industrial Robot 55 sprue picker Year of manufacture: 2018 It is possible to purchase a Moretto raw material feeding system at an additional cost. The set includes: - Volumetric screw dosing unit with hopper - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/Motor: 15 kW Heating capacity: 8.12 kW Total connected load: 23.12 kW All machines offered are started up and tested by our service technicians prior to sale. A video of the technical test of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 cc Clamping unit: Clamping force: 35 t Tie bar spacing: 320x320 mm Platen size: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional equipment: Machine in very good technical condition EUROMAP 67 Robot interface Air valve x 2 Hot runner control x 6 Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Krauss Maffei service in Germany The screw diameter can be changed to 20 mm or 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pump/Motor: 11 kW Cgjdpfx Akey Smk Toaou Heating capacity: 3.78 kW Total connected load: 14.78 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection Unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2020 bar Dosage volume: 231 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Csdey Smkmjpfx Akajgu Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Hot runner control Injection unit hardened - bimetallic Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are checked by our service technicians before sale. It is possible to receive a video showing the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, sumitomo_demag_intelekt_50_370-200 Cgodpfx Aey Smkgjkasu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2400 bar Dosage volume: 22.8 cc Clamping Unit: Clamping force: 25 t Tie bar spacing: 280 x 280 mm Platen size: 410 x 410 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Cgedpfx Asy Smivjkasu Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20 x 1.30 x 1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, 1 Csdpfjy Smipox Akasgu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Boy Service in France It is possible to change the screw diameter to ø 32 mm or 42 mm Dimensions: Weight: 2,430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pump/motor: 11 kW Codpey Smicsfx Akasgu Heating capacity: 7.7 kW Total power: 18.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request