Beli Reishauer Mesin Pengasah Roda Gigi bekas (80.721)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Bodst Hw D Repfx Ad Rolk Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Bodpfxjt Hw Hxs Ad Rolk Module - max. 4 Module - min. 1 Total power requirement 15 kW Machine weight approx. 6000 kg Space requirement approx. m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year of manufacture: 1977 Serial No.: 8687 _____ Wheel diameter min./max. 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swivels up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shift max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed rates: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment • Various milling programs selectable for climb and conventional milling, as well as radial / axial milling processes, possibly for worm milling • Universal milling head with shifting capability • Hydraulic workpiece clamping in the table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed adjustment, display for speed and amperage • Change gears, various accessories, coolant system * Very robust design Condition: Good – demonstration available soon Delivery: Ex stock - as inspected Payment: Upon receipt of invoice, strictly net

Kondisi: bekas, Tahun pembuatan: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 #0836 _____ Max. wheel diameter 80 mm Module 1–3 Helix angle +/- 45° Distance table center to tool center 15–160 mm Vertical hob carriage travel 250 mm Shifting distance/tool traverse path 180 mm Min. number of teeth 3! Cutter diameter x length approx. 90 x 200 mm Cutter speeds up to max. 800 rpm Feeds in axial/radial/tangential directions 20/4/5 mm/rev Max. workpiece clamping length 250 mm Spindle drive approx. 8 kW Total drive approx. 30 kW – 400 V – 50 Hz Total weight approx. 7,500 kg Equipment / Special features • SIEMENS CNC control type 840 C for 6 axes (i.e. hob drive/table drive/swivel angle of hob head/axial feed/radial feed/tangential feed), with gearing-specific operator interface and diagnostic functions for rapid troubleshooting. • With device for automatic threading of the hob into the tooth gap • Automatic shifting of the hob axis • Automatic component loading unit SSL = Rapid Swivel Loader using mechanical indexing gear and cam disk for quick loading times, with triple rotary gripper for loading blanks/processing position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) Blsdjt Hw R Djpfx Ad Rek • Workpiece feeding via plate chain conveyor (PKB) for workpiece transport with positive-fit workpiece carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete work area enclosure, intermediate coolant tank with pump Complete enclosure of the workspace with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1973, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7000 kg LORENZ High-Performance Gear Shaping Machine Model: LS 400 Year of manufacture: 1973 S/N: 11 884 ----- Max. external gear diameter: 400 mm* (possibly larger) Max. internal gear diameter: approx. 350 mm Max. wheel width: 75 mm Module range: 0.5-6 Stroke length: approx. 82 mm Adjustable stroke position: 0–80 mm Ram overhang (ram spindle/machine body): 250 mm Spindle taper: approx. MK 5 Strokes per minute roughing/finishing: 118–1,000 /min. Table size: 400 mm Blsdpfxot Hw Hls Ad Rsk Table bore: 125 mm Mounting height between table and ram head min./max.: approx. 280/350 mm Fixed ram spindle overhang: 250 mm Table axial travel: approx. 295 mm Number of teeth: approx. 12–150/300 Feed range Tooth depth: 0.01–0.063 mm/stroke Rotary feed at tool diameter 125: 0.125–3.150 mm/stroke Spindle/main drive approx. 19 kW / 25 kW – 380 V – 50 Hz Weight: 7,000 kg Accessories / Special Equipment: • Built-in intermediate plate 200 mm for increased ram height, • Hydraulic workpiece clamping system (RINGSPANN make) integrated in the table for flat workpieces • Automatic stroke speed changeover and automatic feed changeover for roughing and finishing operations in up to 4 cuts • Separate control cabinet, separate hydraulic unit • Integrated coolant system with magnetic chip conveyor, two-hand actuation • Approx. 40 change gears, 4 shaper tool holders, 2 pulleys for stroke drive, etc. Condition: Good, under power - ready for demonstration Delivery: ex-stock - as inspected Payment: strictly net, upon receipt of invoice

Kondisi: bekas, cylinder bore diameter 165 mm stroke 120 mm center height 100 mm total power requirement 1.5 kW machine weight approx. 1 t SUNNEN (USA) horizontal automatic honing machine type: MBC 1804 G year of manufacture: 1K1-90075 Honing diameter range – Ø with measuring control 1.5 – 51 mm with automatic stroke 1.5 – 95 mm with manual stroke 1.5 – 165 mm Max. workpiece length approx. 400 mm Max. workpiece length with measuring control 254 mm 12 spindle speeds 200 – 2,500 rpm 5 stroke rates 80 – 310 strokes/min Stroke length with automatic stroke 6 – 120 mm Bodpfxjw U U Iqo Ad Rjlk Honing spindle drive/stroke motor 0.75 / 0.37 kW - 380 V - 50 Hz total drive approx. 1.5 kW - 380 V - 50 Hz Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when target diameter is reached. • Electromechanical measuring control opposite the tool spindle for mounting a measuring probe corresponding to the target diameter, which triggers the automatic shut-off. • Infinitely variable expansion pressure adjustment • Foot switch for manual operation • Built-in honing oil supply • Operating manuals. Unfortunately, no tool holders or other accessories included. Condition: Very good condition! Suitable for all honing tasks! A video of the machine will be available shortly—please click here. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1999, Wheel diameter – max. 280 mm Wheel width 330 mm Module – max. 5 Module – min. 1 Control LIEBHERR CNC Total power requirement 28 kW Machine weight approx. 12 t Space requirement approx. m L I E B H E R R CNC-controlled Gear Hobbing and Profile Grinding Machine Type LCS 282 Year of manufacture 1999 # 1099 Blsdpfx Aot Hwu Ajd Rjk _____ Max. wheel diameter 280 mm Module 1 - 5 Helix angle +/- 35° Distance table center to tool center 15 – 285 mm Grinding slide vertical stroke 330 mm Shift path/tool travel 200 mm Min. number of teeth 7 Grinding spindle position above table min./max. 70 - 360 mm Workpiece clamping length 420 to max. 620 mm Grinding worm / profile grinding wheel Ø 145 x 210 / 175 mm Grinding worm/profile tool speed 2,500 – 10,000 rpm Max. table speed 750 rpm Spindle drive 28 kW Total drive approx. 50 kW - 400 V – 50 Hz Total weight approx. 12,000 kg Accessories / Special Equipment • LIEBHERR CNC control Type LH 90 GG is an easy-to-program CNC control unit (B+R/IPC 5000) with gearing-specific operator interface and diagnostics functions for fast troubleshooting. (Remote diagnostics also possible) • Equipped with automatic threading device for inserting the grinding wheel into the tooth gap • The machine operates with three grinding methods: a. Generating grinding with CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest precision machining! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with the profile grinding wheel in single part operation • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device with a ring loader mounted to the counter column, which automatically loads raw and finished parts. The workpieces are conveyed to the ring loader via a separate FLEX LINK chain conveyor, picked up and also removed. This enables unmanned operation. • Hydraulic workpiece clamping in the table, but without clamping fixtures. Tailstock carriage is present on the counter column, but without tailstock itself. Carriage stroke up to approx. 350 mm • Complete work area enclosure with sliding door and separate CO2 extinguishing system/IR sensor No original coolant system (since there is central supply), and no dresser available Condition : good to very good – demonstration ready under power, compact design! Delivery : ex stock - as inspected Payment : strictly net - after receipt of invoice We appreciate your interest – over 200 gear machines in stock at all times.

Tahun pembuatan: 1991, Kondisi: bekas, Maximum wheel diameter: 0 mm Maximum number of teeth: 0 Maximum module: Minimum module: Total power requirement: kW Blodpfxst Hwv Hj Ad Rjk Machine weight approx.: t Space requirement approx.: m CNC-controlled synchro ring milling machine Ideal for synchro rings, BWO control 785 H

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Bedst Hwxbspfx Ad Rslk Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: bekas, Tahun pembuatan: 1993, Maximum wheel diameter: 330 mm Wheel width: 180 mm Total power requirement: 12 kW Machine weight: approx. 7,500 kg R E I S H A U E R (Switzerland) CNC Gear Grinding Machine Model: RZ 301 AS (*A = automatic threading) Year of manufacture: 1993 #71206 _____ Wheel diameter min./max.: 10 - 330 mm Module: 0.5 - 7 Helix angle: +/- 45° Slide stroke: 180 mm Maximum number of teeth: 10 - 600 Workpiece clamping length: 420 to max. 620 mm Max. workpiece weight: 60 kg Grinding worm dimensions x width: 3 x 50 x 84 - 104 mm Grinding worm speed: 1,100 - 1,900 rpm Spindle drive: 4 kW – total power approx. 12 kW – 380 V, 50 Hz Total weight: approx. 7,500 kg Accessories / Special Features: A modern CNC controller enables the input of all relevant gear parameters and workpiece setup in dialog with the control system. Programming language (German/English) selectable, and DNC interface for data import/export. The machine operates using a continuous generating grinding process with automatic grinding cycles and in-machine automatic dressing of the grinding wheel. Equipped with an integrated automatic device for threading the grinding wheel into the gear gap, resulting in significant time savings; device is hydraulically pivotable. About 10 years ago, the profiling axis (V-axis) was retrofitted electronically by BURRI, providing higher accuracy, easier profile correction, faster dressing; currently fitted with a REISHAUER dressing device type SP-DR with a profile diamond disk. Bledjt Hwyfepfx Ad Rsk The workpiece swivel angle (A-axis) is also actuated electronically, quickly and precisely, and hydraulically clamped; this allows for faster setups and simplified workpiece loading. The shift grinding device guides the workpiece tangentially past the grinding wheel during grinding, ensuring a consistently uniform engagement of the grinding wheel profile. DITTEL grinding wheel balancing system Hydraulic workpiece clamping with external chuck and tailstock in the workpiece slide Complete working enclosure with sliding doors and oil mist extraction No original coolant system present (central supply); however, a separate grinding oil centrifuge is available Separate electrical and control cabinet, standalone hydraulic unit in cabinet, grinding wheel flanges

Tahun pembuatan: 1975, Kondisi: bekas, Wheel diameter – max. 280 mm Number of teeth – max. 100 Module – max. 6 Module – min. 1 Total power requirement: 6 kW Machine weight approx. 2,500 kg Space requirement approx. ___ m HURTH Automatic gear edge milling machine for universal use in deburring and chamfering of gears Type ZK 7 – Year of manufacture 1975 – Serial no. 26 000 Max. workpiece diameter: approx. 280 mm Workpiece length: approx. 200 mm Module range for deburring: 1–6 module for chamfering: 1–4 module Workpiece tooth count: 6–100 Workpiece spindle bore: 102 mm Horizontal adjustment of workpiece head: approx. 340 mm Vertical adjustment of milling slide: 180 mm Swiveling of milling slide: 105° Cross adjustment of milling slide: approx. 300 mm Cutter speeds: 250–2,800 rpm Cutter stroke rates: 30–210 per min. Cutter stroke adjustable: 6–12 mm Milling spindle mounting: 40 SK Total drive: approx. 6 kW, 380 V, 50 Hz Weight: approx. 2,500 kg Bsdpfjt Hw Dksx Ad Rjlk Accessories / Special equipment: • Electric workpiece clamping device with collet chuck system, device for expanding mandrels, and standard workpiece holder, large quantity of clamping tools included. Foot switch for clamping release. • Mechanical dividing device for number of teeth with approx. 20 different index plates. • Adjustable tooth gap centering mechanism mounted on the workpiece head. • Mechanical collet chuck fitted to the tool head for various cutter diameters and types (form, face, shell end mills, etc.). Approx. 50 different used and new cutters of all kinds included. • Hydraulic working stroke of the tool spindle towards the workpiece, with attached hydraulic unit. • Workpiece counter. Condition: good – ready for demonstration, very interesting due to extensive accessories. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. We have approx. 100 other gear cutting machines available in stock. Please contact us for more information.

Kondisi: sangat baik (bekas), untuk mengasah diameter mata gergaji dari 30 hingga maks. 300 mm Diameter batu gerinda 150 mm, banyak aksesori kondisi baik, terawat dilengkapi dengan manual pengoperasian Blodpozntwpjfx Ad Rek

Kondisi: hampir baru (bekas), Hollow tooth of carbide-tipped saws grinding machine VOLLMER model MHZ Blsdpfxehcw N Es Ad Rek

Kondisi: baik (bekas), Modul – maks. 2 Panjang frais 135 mm Total kebutuhan daya 2,2 kW Berat mesin sekitar 1420 kg Kebutuhan ruang sekitar 2,00 x 1,60 x 1,43 m --> Data teknis: diameter frais terbesar: Ø 150 mm --> Panjang frais terbesar: 135 mm --> Modul terbesar: 2 --> Lubang spindel: Ø 24 mm --> Dudukan spindel: MK-4 --> Kecepatan putar frais: 140 - 1120 RPM --> Umpan otomatis Peralatan dan aksesori: Sistem pendingin, frais, roda pengganti, buku petunjuk pengoperasian Bjdpfszkvuvsx Ad Rjlk

Kondisi: baru, Transmissions / Gear Units, Large inventory of used and unused transmissions and gear units from manufacturers such as Flender, Siemens, Hansen, KSB, WGW, TGW, and SALA. Various gear ratios and sizes available, with or without backstop. Bsdeggfhnjpfx Ad Relk Please contact us to find a suitable gearbox.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Saya akan dengan senang hati menambahkan data teknis ke dalam dokumen untuk Anda. Mesin Pembuatan Gigi Roda Gigi Konvensional Negara asal: Jerman Spesifikasi teknis Detail diameter roda gigi maksimum 600 mm lebar roda gigi 250 mm modulus maksimum 8 total kebutuhan daya 2,2 kW berat mesin sekitar 2000 kg dimensi mesin sekitar 2500 x 1600 x 1900 mm diameter pemotong maksimum 250 - 285 mm diameter meja penjepit 460 mm lubang meja 70 mm aksesoris: beragam Unit kontrol Konvensional Informasi tambahan Dokumen Saya akan dengan senang hati menambahkan data teknis ke dalam dokumen untuk Anda. Bledpfx Adjzmqals Rok Saya akan dengan senang hati menambahkan data teknis ke dalam dokumen untuk Anda. Mesin Pembuatan Gigi Roda Gigi

Kondisi: bekas, Deckel SOE Schleifmaschine für Bohrer Spindeldrehzahl: 4.500 U/min Maximaler Spann-Ø: 17,5 mm Maximal schärfbarer Radius: 10 mm Maximaler Seitenschub: 10 mm Winkelverstellung: 45° Maximaler Verfahrweg: 100 mm Blsdszmwkkjpfx Ad Rjk (Siehe technische Details) Geliefert mit 1 Satz Spannzangen und verschiedenen Diamant-Schleifscheiben Betriebsspannung: 380 V Breite: 600 mm Tiefe: 600 mm Gesamthöhe: 1.300 mm Gewicht: ca. 150 kg

Kondisi: bekas, Detail teknis: Blsdpfx Aov U Un Hjd Rsk Pergerakan z: 1250 mm Diameter putaran di atas tempat tidur: 260 mm Diameter benda kerja di atas tempat tidur: 500 mm Diameter benda kerja di atas support: 250 mm Tinggi senter di atas tempat tidur: 260 mm Panjang frais: 2000 mm Modul - maks.: 8 / 12 Kebutuhan daya total: 9,5 kW Berat mesin sekitar: 3,8 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25734, diameter roda: 700 mm, diameter roda gigi: 1.000 mm, lebar roda: 152 mm, kecepatan maksimum spindel benda kerja: 67 rpm, panjang pemakanan sumbu X: 610 mm, panjang umpan sumbu Y: 610 mm, panjang umpan sumbu Z: 725 mm, rentang pivot: 95 °, lubang spindel: 203 mm, jarak pergerakan sumbu X: 610 mm, jarak gerak sumbu Z: 725 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, de Bjdpfxoxaqa Se Ad Rslk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25582, Dilengkapi dengan: Pengontrol Fanuc 30ia Sistem Hidraulik Sistem Pendingin Konveyor Serpihan Pneumatik Sistem Pelumasan Kran Derek Roda Gigi Pengganti Pengumpul Kabut Transformator Lampu Kerja Lampu Indikator Spesifikasi: Rasio Ekstrem: 10:1 Rentang Sudut Akar (Sumbu B): -5 derajat hingga 90 derajat Rentang Sudut Akar yang Setara: -8 derajat hingga 90 derajat (Setara mengacu pada jenis mesin dengan dudukan berputar.) Pemotongan Permukaan: Contoh Diameter Pitch Roda Gigi Maksimum -Spiral 35 Derajat -Pemotong TRI-AC 152 mm dengan 13 Grup Mata Pisau Kedalaman Penuh Maks.: 0,550" Lebar Permukaan Maks.: 1,6" Penggilingan Permukaan: Contoh Diameter Pitch Roda Gigi Maksimum -Spiral 35 Derajat -Pemotong Diameter 7,5" Kedalaman Penuh Maks.: 0,625" Lebar Permukaan Maks.: 1,6" Perjalanan Dasar Berputar Maks. (Sumbu B): -5 derajat hingga 90 derajat Perjalanan Vertikal Maks. (Sumbu Y): -4" hingga 7" Perjalanan Horizontal Maks. (Sumbu X): -6" hingga 4" Perjalanan Dasar Geser (Sumbu Z): 2" hingga 12" Jarak Pusat Mesin ke Permukaan Spindel Kerja (Tetap): 4,5" Jumlah Gigi: 5 hingga 200 (termasuk) Diameter Pemotongan: Penggilingan Permukaan Konvensional: 1,1" hingga 7,5" Helixact: 100 mm hingga 200 mm Pitch Halus: 102 mm hingga 152 mm Pitch Kasar: Hanya 152 mm Kecepatan: Sumbu B – Dasar Berputar (Derajat per Detik): 30 derajat/detik Sumbu A – Spindel Kerja (Penggilingan Permukaan) (RPM): 0-75 Sumbu A – Spindel Kerja (Pemotongan Permukaan) (RPM): 0-375 Sumbu C – Spindel Pemotong (RPM): 30-500 Sumbu X – Horizontal (Inci per Detik): 4,92"/detik Sumbu Y – Vertikal (Inci per Detik): 4,92" Sumbu Z – Dasar Geser (Inci per Detik): 4,92"/detik Spindel Kerja: Diameter Tirus pada Ujung Besar (#39 Taper): 3-29/32" Tirus per Kaki: 39/64" Kedalaman Tirus: 3" Luas Lantai: 95,75" x 63,5" Tinggi (tidak termasuk pengumpul kabut): 90,75" Berat Kira-kira: 22.000 lbs Bljdpfx Aozn Aymed Rjk

Kondisi: bekas, Tahun pembuatan: 1985, RIVO Risstaler R200 GA, Mesin Pengasah Gerigi, Tahun Pembuatan 1985 Diameter cakram pengasah: 200 mm Diameter lubang cakram pengasah: 25 mm Jarak antar gigi maks.: 50 mm Tinggi gigi maks.: 25 mm Bodpfjzl N Irjx Ad Rjlk Sudut pengasahan: 0-30 derajat Tinggi mata gergaji maks.: 190 mm Panjang mata gergaji min.: 900 mm Daya motor: 0,65 kW Motor pengumpan: 0,12 kW Tegangan suplai: 400 V Dimensi keseluruhan: 251 x 90 x 163 cm Berat: 530 kg tersedia segera - berfungsi penuh Lokasi: Austria, dekat St. Pölten

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin penajam otomatis yang diperbarui untuk mata gergaji melingkar karbida. Diameter mata gergaji hingga 600 mm. Dikendalikan secara hidraulis. Bjdpfszmhd Uox Ad Rslk Dilengkapi dengan sistem pendingin, pompa, dan tangki.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah Vollmer untuk gergaji pita, konstruksi yang kokoh. Pemakanan dari kiri ke arah batu gerinda. Lebar bilah hingga 360 mm. 3 jenis bentuk gigi yang dapat diubah. Batu gerinda berdiameter 250 mm. Bljdjzmg I Sspfx Ad Rsk Sistem pemakanan variabel dengan pengatur frekuensi. Sistem pemakanan linier. Penyangga dan dudukan pengarah yang kokoh, tinggi dapat disesuaikan. Mesin telah diperiksa dan diuji secara teknis.

Kondisi: bekas, TECHNISCHE DATEN Bedpfx Adsyuzgge Rjlk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 250003, berat keseluruhan: 780 kg, tegangan masuk: 230 V, arus masuk: 4 A, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, Mesin Penyetel Roda Robot OT (teknologi penyetelan sisi luar), robot penyetel dengan penyetelan sisi luar. Kunci pentil 5,5 mm segi enam/3,2 mm segi empat. Penyangga untuk jari-jari roda. Bedpfxjzl U Azj Ad Rslk Sekitar 10 m rel pengarah roda.

Kondisi: siap digunakan (bekas), SYKES5E-HU-20240611 Bljdex Rvguopfx Ad Rok