Beli Sick Wt100-P3410 bekas (232)

Kondisi: bekas, Tahun pembuatan: 1983, druck_techdaten_01 Nlsdpsym Dz Dsfx Adijd

Kondisi: baru, en-GB Njdpfowmwvcex Adijld

Kondisi: baru, pk100_excenterpresse_2024_de Nlodpfxjr I H Dgo Adied

Kondisi: baru, Hydraulic Double-Column Press 250 tons KK Kletzer Technical Data: - Maximum Stroke Length: 400 mm - Table Height: 900 mm (from floor to tabletop upper edge) - Installation Height: 600 mm (max. distance between table and ram plate) - Speeds: - Approach: 120 mm - Pressing: 13 – 4 mm - Return: 170 mm/sec - Pump Output: 103 L/min (REXROTH axial piston pump) - Motor: 22 kW – 1500 rpm - Dimensions (LxWxH): 2000 x 3200 x 4300 mm - Approx. Weight: 10,000 kg - Oil Volume: approx. 700 L (Tank capacity: 800 L) Capacity: - 250 tons (at 245 bar) Operation: - Via key switch - Manual/Set-up mode via two-hand operation without light sensor - Automatic mode via two-hand operation with full speed and light sensor Cylinders: - Main Cylinder Ø 350 mm - Auxiliary Cylinders: 2 pcs. Ø 80 x 60 mm Plates: - Table Plate: 1000 x 1000 mm, with T-slots - Ram Plate: 1000 x 1000 mm, with T-slots & spring welds Njdpfx Asgta Rcedield Frame clearance width: 1,100 mm Hydraulic System: - Block & valves (REXROTH), hydraulic accessories mounted atop the press - Pre-fill valve - Hydraulic & mechanical ram locking - Pressure adjustment via PLC (min. pressure 35 tons) - Speed adjustment via PLC - Pressure-hold valve for 600 sec. - Air cooler (temperature control adjustable via screen) - Automatic guideway lubrication (adjustable via screen) - Work area laterally closed with sheet metal wall - Guide rails for parallelism - Auxiliary motor: 5.5 kW + 2.2 kW - Auxiliary pump: 22 cc + 5.5 cc - Protective railings around hydraulic unit, side climbing ladder Control & Automation: - SIEMENS S7-1200 control system - Main control cabinet - Swiveling operator panel - Soft starter for main motor - Safety PLC: Sick - PLC screen: 9’’ Siemens - Mobile two-hand operation - Linear scale for stroke adjustment: 450 mm NOVOTECHNIK - Light sensors front & rear: SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance (Siemens) - Working area illumination (dual) - 8 free I/O on the PLC - Automatic pressure compensation in case of loss Documentation: - User manual (German) - Hydraulic diagrams - Electrical diagrams Notice: The price indicated is approximate and subject to change due to fluctuating steel prices.

Kondisi: baru, Pressure: 60Motor: 11Mounting height: 450Stroke length (max.): 400Table size: 600 x 500 x 80Ram surface: 600 x 500 x 90Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,700Weight approx.: 4,000Oil capacity: 200Control / Key switch: 1. Setup mode manual without light sensor (max. 10 mm/sec speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guides: 2 pcs Ø 40 mm Motor: 7.5 kW – 11 hp (IE-3) Pump: 18 cc – 26 liters / ASC Speed: Advance 110 mm/sec – Return 120 mm/sec – Pressure: 11 mm – 5/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table plate) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 60 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control panel Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear encoder for stroke adjustment 7” PLC display – Siemens (German & English) Nedpfxjmmuq Io Adisld Movable two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double work area lighting 8 free I/O channels on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Nlsdpfx Adompfwdjisd

Kondisi: baru, Pressure: 125 t Slide Adjustment: (automatic adjustment) 40 mm Stroke Length (max.): 10–125 mm Total Power Requirement: 11 kW Weight approx.: 8,000 kg Dimensions (LxWxH): 1,800 x 1,500 x 2,600 mm Technical Data Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Slide Size: 700 × 500 mm with pin hole Stroke Adjustment: 20 – 125 mm Slide Adjustment: 40 mm Shut Height: 475 mm Accessories & Features Control System: Siemens S7-1200 PLC Operator Screen: 9” Siemens Touch Panel Precise stroke adjustment directly via display Adjustment of min. & max. stroke rate Nodpfoktm N Dsx Adield Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in control cabinet Safety light barriers: SICK, PILZ, or LEUZE (Category 4, CE-compliant) 2 rupture plates included in scope of delivery Lower support plate for secure transport Anti-reach protection for maximum occupational safety Pneumatic clutch & brake combination The machine stands out due to its exceptionally comprehensive standard configuration at the highest technical level. The use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and durability.

Kondisi: baru, Pressure: 125Motor: 22Mounting height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode manual without light sensor (max. 10mm/sec travel speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guide: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Advance 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm - 5 mm/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (custom design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed weld) Nedpfx Ademr Hpcsield Table height: 850 mm (floor to upper table edge) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (10 – 125 tons) Adjustable speed via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling control console Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm system for faults (light & sound) Double workspace lighting 8 free I/Os at the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors are retractable to the rear)

Kondisi: baru, Pressure: 150 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 900 x 600 Ram surface: 900 x 600 Table height: 850 Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 Weight approx.: 8000 Oil filling: 400 Hydraulic C-Frame Press General information: Construction type: C-frame design, hydraulic Press force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Painting: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control system: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft start Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measurement system: Linear scale (500 mm) Touchscreen: 9“ Siemens, storage for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external integration (e.g. robot, coil line) Work area lighting (dual) Hydraulic system: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 ccm, 65 l/min – REXROTH Auxiliary pump: available Tank volume: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram safety lock (top dead center position) Pressure & speed adjustable via PLC Mechanical data: Mounting height: 500 mm (distance ram – table plate) Stroke length: 400 mm Mounting depth: 650 mm Throat: 350 mm Table height: 850 mm (floor to top of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & electronics: Main control cabinet Nedpfx Aewzzzfodield Pressure & speed setting via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Screen: 9“ Siemens touchscreen Remote maintenance via Secomea module Safety & operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding backwards) Operating manual & parts list (German), including maintenance schedule

Kondisi: baru, Capacity: 100 t Strokes per minute: 50 spm Table clamping surface: 900 x 700 mm Slide dimensions: 500 x 350 mm Stroke adjustment: 20 - 130 mm Ram adjustment: 100 mm Installation height: 400 mm EEP-PK100 – Eccentric Press Technical Data Capacity: 100 t Strokes per minute: 50 spm Table size: 900 × 700 mm Ram size: 500 × 350 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Features & Accessories Control system: Siemens S7-1200 PLC Operating screen: Siemens 9’’ touchscreen Stroke adjustment directly via display Setting of min. & max. stroke count Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety design in control cabinet Light curtains: SICK, PILZ, or LEUZE (category 4, CE-compliant) CE-compliant safety system 2 rupture disks – included in delivery Lower support plate for secure transport Underrun protection – for maximum occupational safety Pneumatic clutch and brake combination Nlsdpfx Adev Hin Ejied The machine impresses with an exceptionally comprehensive standard equipment package at the highest technical level. Use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and longevity.

Kondisi: baru, Pressure: 150 Slide adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10-125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50-90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7-1200* Stroke adjustment: directly via the control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Guide: internal and external eccentric guidance Crankshaft: made of hardened steel 4140 Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand as well as foot pedal operation possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure for the working area External connections: 8-pin I/O at the PLC (for signal exchange & expansions) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: machine and equipment according to CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Pressing force: 150 t - Table size: 750 x 1000 mm (fixed table) - Stroke length: 10-125 mm, automatic stroke length adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin reception & T-slots as per customer specifications) - Strokes: 50 – 90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm Nlsdpfx Adjtqwtdjied - Weight approx.: 9,500 kg - Slide adjustment: 40 mm (automatic adjustment)

Kondisi: bekas, Double Column Hydraulic Press SCHÖN Type SH 25 Machine No.: 4453 Year of manufacture: 1999 Pressing force: 25 t Column spacing: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection: 380 Volt, 50 Hz Equipment: - SICK safety light curtain, type FGS 300-11 - Two-hand operation Nsdew A Amrjpfx Adiold - Stroke counter - Rapid traverse and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press dwell extension 1-10 s (pressure holding time) - Time setting for return stroke speed - Blowing device prepared electrically, without air valve - Hydraulic tool safety, manually adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1,200 kg Good condition

Kondisi: bekas, 1 Nlodpfxjv Srfwj Adisd

Kondisi: baru, Pressing force: 80.0 t Bending length: 2600 mm Frame gap: 2200 mm Throat depth: 250 mm Ram speed: 90.0 mm/sec Working speed: 7.5 mm/min Return speed: 60.0 mm/sec Nlodpfx Adoxaafwjijd Stroke: 160 mm Installation height: 380 mm Table height: 900 mm Oil capacity: 150 ltr. Operating voltage: 400 Volt Weight: 5227 kg Dimensions (L-W-H): 3750 x 1950 x 2400 mm ----- ECO EXPERT CNC electro-hydraulic press brake with: * DELEM CNC control * CNC-controlled axes: Y1 + Y2 + X axis * Manual table crowning ----- Equipment: - CNC electro-hydraulic die bending press - DELEM CNC control model "DA-58T" * Swivelling operator control panel at the front left - CNC-controlled axes: Y1 - Y2 and X - CNC electro-motorized backgauge * X-axis travel: 800 mm * X-axis traverse speed: 230 mm/s * With ball screw drives - ROLLERI gooseneck upper tool "PS 135.85-R08", System "A" * Including quick-change clamping system * Including crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Manual table crowning, including analog value display - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - Light barrier at the rear of the machine - 2x robust front support arms - SIEMENS electrical system - BOSCH/HOERBIGER hydraulic system - CE marking/conformity declaration - Operating manual incl. wiring & hydraulic diagrams

Kondisi: baru, Pressure: 160 t Bending length: 3760 mm Distance between uprights: 3250 mm Throat depth: 250 mm Ram speed: 90.0 mm/sec Working speed: 7.5 mm/min Nledpfx Adjxabb Toisd Return speed: 80.0 mm/sec Stroke: 160 mm Installation height: 395 mm Table height: 900 mm Oil capacity: 200 l Operating voltage: 400 Volt Weight: 8514 kg Dimensions (LxWxH): 4910 x 1900 x 2550 mm ----- ECO EXPERT CNC electro-hydraulic press brake with * DELEM CNC control * CNC controlled axes: Y1 + Y2 + X axis * manual table crowning ----- Features: - CNC electro-hydraulic press brake - DELEM CNC control, model "DA-58T" * swiveling operator console on front left - CNC controlled axes: Y1, Y2, and X - CNC servo-driven backgauge * X-axis travel range: 800 mm * X-axis travel speed: 230 mm/s * with ball screws - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * incl. quick-change clamping system * incl. crowning device in tool holder - ROLLERI segmented universal die block "M 460 R" * incl. 1x die shoe "C 1050-R" - manual table crowning incl. analog display - FIESSLER AKAS laser safety system in front of the machine (incl. FPSC) - Light barrier behind the machine - 2x sturdy front support arms - SIEMENS electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual incl. electrical & hydraulic diagrams

Kondisi: hampir baru (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, ABB WELDING CELL WITH ROBOTS 1. GENERAL • Manufacturer: ABB • Model: FlexArc LX2 • Dimensions: 4.6 x 2.6 x 2.6 m • Weight: 5,200 kg • Year of manufacture: 2005 • Previous use: training workstation 2. CONSTRUCTION • Support frame • Metal walls • Roof with extraction port for external ventilation connection • Service door with window, equipped with electric safety lock • Albany Rapid Protect 320 roll-up gate with frequency inverter • SICK horizontal safety light curtain in the loading/unloading area of the positioner • Siemens S7-300 controller • Siemens TP 170B color/5.7” touch control panel • Horizontal-axis positioner for mounting a horizontal-axis jig/tool, type IRBP 250 L, with 250 kg load capacity 3. ROBOTS • Number of robots: 2 - 1 welding robot - 1 handling robot (can be upgraded for welding applications) • Model: IRB 1400 • Version: M2004 • Year of manufacture: 2005 • Serial numbers: IRB1: 14-50257; IRB2: 14-50258 • Control system: IRC 5 • Operating hours: approx. 2,000 Nlsdpfsvbg Ufsx Adied • Automatic TCP measurement 4. WELDING EQUIPMENT • Welding power source: MIGROB 500 (ABB) – 1 unit • Spare welding power source: LRC 430 (ESAB) – 1 unit • Wire feed unit: WIRE FEED UNIT A34E – PIB (ABB) – 1 unit • Water cooler: OCE 2H (ESAB) • Torch cleaning device: TC96 – 1 unit • Welding wire cutting device – 1 unit

Tahun pembuatan: 1998, Kondisi: baik (bekas), AMADA PROMECAM ITS2 2512 CN numerisch gesteuerte Abkantpresse HERSTELLER: AMADA PROMECAM, hergestellt in Frankreich MODELL: ITS2 2512 BAUJAHR: 1998 STEUERUNG: OPERATEUR 2 PRESSKRAFT: 25 t BIEGELÄNGE: 1.250 mm ACHSEN: 4-Achs CNC SCHUTZEINRICHTUNG: SICK Lichtschranke für Bedienersicherheit WERKZEUGE: kompletter Satz Spannpratzen Nedpfxopz Igij Adield SONSTIGES: Aufwärtslaufende hydraulische Abkantpresse Fußschalter Vollständige Dokumentation/Bedienungsanleitungen Kompletter Satz Spannpratzen Satz Ober- und Unterwerkzeuge

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, mir200-2018-hu Nodeun Sq Ujpfx Adield

Kondisi: bekas, Tahun pembuatan: 1984, Tekanan 100 ton Jangkauan 320 mm Langkah 138 mm Luas meja 850 x 550 mm Tinggi pemasangan 385 mm Kapasitas oli sekitar 500 liter Luas permukaan plunger 560 x 450 mm Total kebutuhan daya 30 kW Berat mesin sekitar 6,5 ton Nodet Dctrjpfx Adijld Ruang yang dibutuhkan sekitar 1,5 x 2,0 x 3,0 m - Mesin diperbarui pada tahun 2008 - Penutup ruang kerja dengan sensor cahaya Sick - Tinggi pemasangan 580 mm - tanpa plunger besar dengan pengeluaran dan pengencang spindel - Konversi sistem hidrolik menjadi katup proporsional - Konversi lemari kontrol - pengukuran jarak elektrik - sebelum pengiriman, dilakukan pemeriksaan UVV terkini dengan pengukuran waktu pengereman Pekerjaan berikut dilakukan di tempat kami: - Mesin diperiksa secara teknis - Mesin dicat ulang - Siemens Soft-Start, panel sentuh - Pemeriksaan UVV terkini dengan pengukuran waktu pengereman dilakukan sebelum pengiriman Mesin aman untuk pekerjaan manual pada alat yang terbuka.

Kondisi: bekas, Tahun pembuatan: 1978, Pressure: 63 t Throat depth: 280 mm Stroke: 160 mm Table surface: 560 x 500 mm Ram area: 280 x 280 mm Installation height: 400 mm Oil capacity: approx. 360 l Total connected load: 22 kW Machine weight: approx. 4 t Space requirements: approx. 1.45 x 1.75 x 2.67 m - Working area enclosure with SICK light curtain - Large ram with ejector and pin clamping unit - Foot switch Nljdpfx Adshbalnoijd - Motorized depth stop in the cylinder

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Lebar kerja maksimum: 1600 mm Tampilan digital dengan layar sentuh Kecepatan masuk variabel 5 - 15 m/menit Nedjxx Ddbjpfx Adiold Sabuk / rol penggerak pada sisi masuk / keluar Panjang total: 8500 mm SICK emergency light beam/stop

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products such as sandwiches, meat, seafood, fruit, vegetables, as well as non-food items, medical products, and household goods. Central components are made from stainless steel, with easily replaceable modular forming molds, water-cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH, pneumatic components by SMC, electronic components primarily from Schneider, photo sensors from SICK, PLC and touchscreen by Delta. - Specifications: Top packaging material: heat-sealable films, width: max. 400mm; bottom packaging material: thermoformable sealing film (rigid and flexible films can be used), thickness: 300 - 900µm, width: max. 400mm + 2mm, forming depth: max. 80mm (forming depth depends on the thickness of the bottom film); loading area: standard 120-150cm (additional length available as an option); max. idle cycle rate: 8 cycles/minute; Power: 3P, 380V, 50/60Hz; Compressed air: 1.2m³/min, 8bar. Please note that our new prices are often below the typical used prices. Feel free to contact us and let us know your packaging requirements. Typically, we always have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we also offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty. Njdjv Nk Acspfx Adield

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic liquid filling system with 4 filling heads, suitable for various filling volumes, for example from 50ml up to 500ml – can be customized according to client requirements. The filling volume is individually adjustable within the specified range by modifying the air cylinder stroke – easily controlled via software, without the need for additional modules. Operating principle: Bottles are fed via a conveyor belt, followed by precise bottle positioning, insertion of the filling nozzles into the bottles, and filling by means of dosing lances regulated by air cylinders. The filling lances are equipped with a special shut-off mechanism to prevent dripping after dosing. Relevant electronic components: PLC and touchscreen by SIEMENS; recognition sensors by Sick; speed inverters by Panasonic. Pneumatic components mainly from AIRTAC. Integrated CIP self-cleaning hardware and software, customizable to customer specifications. - Specifications: Number of filling heads: 4; maximum machine cycle rate (no load): 26 cycles/min; accuracy depends on the selected filling range and actual filled volume; stainless steel construction in SS304 – all parts in contact with filling product are made of SS316; power supply: 220V / 0.5kW; air pressure: 4-6 bar, 0.4m³; machine dimensions (LxWxH): 2500x1070x1800mm; weight: 850kg. Optional dosing using servo motors instead of air cylinders available at an extra charge. Machine dimensions for the servo version (LxWxH): 2500x1300x1900mm. The machine/system is also available in further versions for a variety of packaging sizes and speeds. Nlodsv Nk Rmjpfx Adisd Please note that our new machine prices often undercut typical used equipment prices. Feel free to contact us and provide details about your packaging requirements. Usually, 30-50 different new machines are available immediately from stock. For custom-built machines we offer very short lead times, starting from approx. 3 weeks. – All machines are available with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic liquid filling system with 6 filling heads, suitable for various filling ranges, for example from 50ml to 500ml – can be customised to client requirements. Within the filling range, the volume is individually adjustable by adapting the stroke volume of the air cylinders – easily controlled via software, with no need for additional modules. Functionality: Bottles are fed in via a conveyor belt, followed by bottle positioning, insertion of filling needles into the bottles, and filling via filling lances. The dosing is regulated by air cylinders. The filling lances are equipped with a special stop mechanism to prevent liquid dripping. Relevant electronic components: PLC and touchscreen by SIEMENS, detection sensors by Sick, speed inverter by Panasonic. Pneumatic components predominantly by AIRTAC. CIP self-cleaning hardware and software is available and can be customised to client specifications. - Specifications: Number of filling heads: 6; max. machine cycle rate at idle: 35 cycles/minute; accuracy: depending on selected filling range and actual fill volume; stainless steel version SS304 – all parts in contact with the filling medium made from SS316; Power: 220V, 0.5kW; air pressure: 4-6bar, 0.4m³; machine dimensions LxWxH: 3500x1350x1800mm; weight: 850kg. - Installation of servo motors for dosing instead of air cylinders available at additional cost. Machine dimensions for the servo version LxWxH: 3500x1350x1900mm. The machine/system is also available in other models for various packaging sizes and speeds. Please note that our new prices are often below standard used machine prices. Feel free to enquire and let us know your specific packaging requirements. - Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines are available with full warranty. Nledpsv Nk Rtsfx Adijd

Kondisi: baru, Tahun pembuatan: 2025, Sample filling system for engine oil into 20-liter canisters. Suitable in general for various liquids (high or low viscosity) into large containers or canisters. The filling volume is controlled by a weighing sensor. High accuracy is achieved through slow filling speed while still maintaining a relatively high output, enabled by two filling heads. The system can be equipped with a steam sterilizer. Mitsubishi PLC, WIENVIEW touch monitor, sensors by Sick. - Specifications: Filling range: 5–25 kg; Speed: up to 250 containers/hour; Accuracy: = +/-0.3%. Number of filling heads: 4; Required compressed air: 4-6 bar. This is a sample installation. Filling volume and range can be customized according to customer requirements, which may affect performance parameters and price. Final specifications depend on the customer's requirements. Please provide us with your details so we can prepare a complete offer. Nodpev Nlcwsfx Adiold Please note that our new equipment prices are often below typical used prices. Feel free to inquire and tell us about your packaging application. – We generally have 30–50 different new machines available from stock at any time. For custom-built machines, we offer very short lead times starting from about 3 weeks. – All machines are offered with a full warranty.