Beli Alzinger Maschinenbau Lepton 2100 bekas (2.232)

Tahun pembuatan: 2022, jam operasional: 2.896 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lepton2100-en Djdpfowlt N Njx Aiusch

Tahun pembuatan: 2025, jam operasional: 1.050 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Effortlessly comply with the statutory 1% threshold! From May 2025, bio-waste may only be treated if the impurity content is below 1.0% by weight. Our Lepton 5100 was designed exactly for this requirement. Advantages of the Lepton 5100: Separation instead of shredding Djdpfx Aioy Elwfeuoch Gentle bag opening: Waste bags are reliably opened without shredding their contents. A pre-shredder (slow-speed) is not required! Maximum film size: Foils remain largely intact and are effectively removed in the initial screening process before fragmenting in the composting process due to mixing, heat, and UV exposure. Highest purity: Prevents microplastics during processing and ensures end product quality. Cost-effectiveness: Legal compliance: Securely achieve the BioAbfV’s 1% limit. Process optimization: Reduced effort required for downstream cleaning. Cost efficiency: Significant savings on diesel and wear costs, as no pre-shredder is needed. Integrated air separator: No need for bulky additional machinery. Saves on space and maintenance costs. Process innovation (flexibly controllable): Organic waste processing (2 fractions): Reversible intermediate fraction conveyor combines middle and fine fractions for a homogeneous material. Result: Clean fractional output for digestion/composting plus an oversize fraction with foils/impurities. Compost refining (3 fractions): Separation into premium compost, structural material, and energy wood. The ballistic effect removes stones, glass, and hard plastics via the stone fraction conveyor. Integrated air separators remove any remaining foils. Current area of use: Successfully processing organic waste for wet fermentation. The machine produces a contaminant-free, homogeneous fraction for the fermenter, preventing floating or sinking layers. Inspection & demonstration: View the machine in live operation at our partner site in the Kelheim district. Processes can be discussed directly with the plant operator. Technical Data: Model: Lepton 5100 | Year: 2025 | approx. 1,050 hours Location: D-84069 Schierling | Availability: short-term Screen decks: Deck 1 (52mm), Deck 2 (43mm) Equipment: Variable feed roller, volume measurement, preparation for air separator, compressor, LED package, radio remote control. Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). Transport dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). Screening materials: Compost, green waste, biomass, wood, waste, RDF. Condition: Very good, fully operational, machine will receive full workshop overhaul prior to sale.

Kondisi: baru, Tahun pembuatan: 2021, Demonstration machine Year of manufacture: 2021 (Bench-mounted machine) For stationary profile milling of leading edges on softforming and postforming workpieces. Also suitable for trimming/milling thick PVC edges on right-angled workpieces and those with multi-sided edge banding. Processing of symmetrical and asymmetrical softforming and postforming profiles is possible after manual adjustment of profile depth. The motor is guided manually by tracing along the workpiece. Standard equipment: - Workpiece stop system Dodpfx Askwhapjiusch - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, infinitely variable up to 27,000 rpm, equipped as standard with radius cutter R=2. Tracing is performed by a guide ring on the workpiece. - Unit guidance on precision round guideways. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (dependent on edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1Ph Total power: 0.8 kW Pneumatic connection: 6 bar Required space: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen

Kondisi: bekas, Tahun pembuatan: 2014, en-technical-details-transfer-press-line-vehicle-sockets-product ion Dodpfsu Nfttsx Aiuech

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Dcjdpfx Aiju Ibuwoush Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: bekas, Detail teknis: Panjang batang: maks. 30 mm Kapasitas: 600 unit/menit Diameter kawat maks.: 5 mm Area kerja: 30 mm Dimensi panel kontrol PxLxT: 1,45x0,55x2,1 m Dimensi mesin: 2,95x1,5x2,15 m Dimensi haspel: 1,15x1,15x1,15 m Dodeu Nfrcopfx Aiuoch Press mekanik untuk pembentukan dingin Untuk produksi rivet, pin rantai, baut, atau produk khusus. (BUKAN SEKRUP menurut produsen) Instalasi merupakan pesanan khusus dan belum pernah digunakan (seperti baru). Aksesori: - Haspel - Manual pengoperasian Mesin dapat didemonstrasikan. i.D.

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm L/D pomer: 25 D Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Dcedpfsxu E E Sex Aiuoh Chladenie: Vzduchom chladený valec s vykurovacími zónami Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PA12704, 110610702, PA12707, mobilitas: bergerak, Fish sorting machine Badeer – complete documentation included in both Polish and English. The onboard computer operates on the MES – B’Logic software. It features two modules: B’Logic Grading and the B’Logic label design program. The set includes: - CAB label printer, - Feed hopper, - Acceleration conveyor, - Weighing machine, - Sorting conveyor, - PC computer The computer located by the machine next to the label printer is a touchscreen, while the main computer for setting the specifications of the currently processed product does not need to be placed directly at the machine. Specification: - 100 – 120 fish per minute, - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by the user (as shown in the video), - Airborne noise: < 70 dB Machine dimensions: Sorting section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m, Belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Belt width: 45.6 cm Motor: Drum motor Power consumption: 0.37 kW Dynamic scale: Belt width: 250/350 mm Product weight: up to 1 kg (calibration possible) Motor power: 0.18 kW Speed: 0.25 m/s – 2.0 m/s Dcodpfxsy Hiyaj Aiush

Kondisi: baru, Cutting width 115 and 82 mm Cutting height 55 mm Motor power 2.0 kW Machine weight approx. 45 kg Mitre Saw KS for (glass) strip cutting with manual and electronic length stop suitable for wood, PVC, aluminium ----- Brief manufacturer description: - Crosscut and mitre circular saw for precise and user-friendly trimming in the molding/strip sector - Robust cast iron construction - A double ball-bearing shaft acts as the swing pivot below the material support table, optimizing material cutting. Cutting always occurs at the rear upper side. - Quick mitre adjustment up to 45° - Re-adjustable fixed stops at 90° and 45° - Upper blade guard can be connected to extraction system ----- Technical Data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade Ø: 250 mm Extraction connection Ø: 45 mm ----- Technical Description: Pos. 1.1 Crosscut and mitre saw type KS, 2 kW, 400 V, 30/40 mm blade mount Pos. 1.2 Pivot point LEFT Pos. 1.3 Pneumatic material clamping for KS, both sides of blade, 2 horizontal pneumatic cylinders, activated via roller valve during saw stroke, can be switched off Pos. 1.4 Carbide-tipped circular saw blade for wood, 250 x 2.8 x 40 mm 80 teeth, negative angle ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- Options at extra cost: Pos. 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery supply, reading via magnetic tape and sensor, resolution 0.1° Pos. 1.6: EUR 695.00 Machine stand for mitre saw KS ----- Pos. 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for strip cutting Travel distance 1.8 m, total length 2.0 m 10” touch display, connection 230 V Feed speed 40 m/min Direct measurement system – repeatability ± 0.1 mm Operating modes: (1) automatic absolute stop, (2) cut lists, (3) pusher cut lists, (4) incremental, (5) fine adjustment Program memory for up to 999 cut lists Dedpfxsy T R Sqe Aiujch USB import and direct processing of cut lists at terminal Stop can be folded backwards With support foot Pos. 2.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- Pos. 3.1: Manual length stop EUR 600.00 Length stop 2.0 m, left, with 110 mm wide support, with scale, stop carriage foldable and with support leg Pos. 3.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- (technical data as per manufacturer – subject to change!) All prices quoted are net. Plus statutory VAT.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 300 mm, lebar pemotongan (maks.): 700 mm, jenis aktuasi: hidrolik, tinggi total: 1.400 mm, de-001 Dcjdpfx Aieza U Dieuoh

Kondisi: bekas, Terowongan Pengeringan Cat Frei AG Harap diperhatikan bahwa item dalam lot 30466-430 ini juga ditawarkan secara bersamaan dalam lot kombinasi 30466-425 sebagai satu lini lengkap. Bagian-bagian terpisah dari lini lengkap 30466-425 ditawarkan sebagai lot individual 30466-426 hingga 30466-433. Dodpfx Aisy Ux Rqeuoch Penawar dapat menawar untuk lini lengkap dan/atau untuk lot individual. Penjualan bersyarat dan tunduk pada persetujuan penjual. Kemungkinan besar penjual akan menyetujui tawaran agregat tertinggi untuk lini ini, baik sebagai satu lot ataupun sebagai lot individual. Penawar yang berhasil akan diberitahu dalam waktu 2 hari kerja.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Complete valve grinding set for professional engine reconditioning – packed in three sturdy transport cases. Includes the actual valve grinding machine, a comprehensive set of valve seat cutters/reamers in various diameters, as well as adapters and accessories (see photo – cases open). Ideal for engine reconditioning workshops, automotive specialists, marine/stationary engine service, vintage vehicle restoration, railway workshops, and industrial repair facilities. The complete set is difficult to find new as separate items and is therefore in high demand. According to the equipment register (inv. no. 200004), manufacturer: EFCO Maschinenbau GmbH, model: Valval – please verify on the nameplate on-site. Test run/inspection possible at any time by appointment. Scope of delivery (3 transport cases): 1. Valve grinding machine (main grinding unit) 2. Valve seat tools/cutter set 3. Adapters, reamers, and accessories Technical data: - Power supply: 230 V (please check on site) - Application: Valve grinding, valve seat cutting, valve guide machining - Completeness: apparently complete as per photo, please verify against the original parts list on site Collection/Shipping: Dcodpfozachvsx Aiush Self-collection by car/van (3 cases, each approx. 20–30 kg). Shipment by freight carrier possible.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Dsdexl Edijpfx Aiujch

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: Dsdpfx Aowka S Ijiuoch - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: bekas, Technische Details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m Dcsdpfswiu Smjx Aiujh BRUSHING MACHINE for deburring / brushing of tube ends / welded profile tubes / tube bodies on the face side

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm - For round pipes up to max. OD = 220mm - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display Dcjdpfx Aiegu Nmhjueh - Data import via USB and LAN - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany The images show an older machine.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6,000 mm - For round pipes up to max. OD = 150 mm - For square tubes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight 150 kg - 4-jaw chuck Dcodpjg Dvdcefx Aiueh - Side loading possible, secured by light curtain - Fully automatic cutting sequence - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The images show an older, larger machine.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm Dcodpfx Aetr U Hljiush → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): Dcjdsttah Rjpfx Aiueh → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, 1 Djdpjx Ebzqofx Aiuoch

Kondisi: baik (bekas), Schmedt PraForm HHS 2100 Mesin Tekan Buku Mesin tekan buku dengan pemotong alur. Diproduksi oleh Schmedt, Jerman. Spesifikasi teknis: Format maksimum: 400 x 520 x 100 mm Berat: 250 kg Catu daya: 380V + udara bertekanan. Dsdpfx Aiey Ehmpouoch

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20131018, lebar kerja: 1.640 mm, sambungan udara terkompresi: 6 batang, lebar total: 2.600 mm, panjang total: 12.500 mm, tinggi total: 2.250 mm, berat keseluruhan: 7.100 kg, Mesin lem Fasson dengan lebar kerja dari 150 mm hingga maks. 1.640 mm. Dapat mengolah karton bergelombang atau karton sarang lebah hingga ketebalan 20 mm dan karton mulai 350 g/m2. Ketebalan klise: 8 mm, bahan: karet busa/spons. Kebutuhan daya: sekitar 15 KW. Dodpfxoy R Emko Aiuech

Kondisi: baik (bekas), You are bidding here on a branded guillotine shear from the renowned German manufacturer Schröder, in good condition. Machine features: - Schröder MHSU shear - Cutting capacity according to nameplate: up to 3 mm steel, significantly more for aluminium - Working length: just over 2 m - Manual backgauge approx. 750 mm; 1,000 mm with digital display - Side/winkel gauge - Extension of stop up to 2 m - Rotatable blade - Cutting gap lighting - Sheet metal chute - Foot pedal operation - Weight approx. 1.3 t We also have other machines available such as Schechtl MAX 200 - 2.5 mm, Schechtl MA 200 2 mm and HA, Schröder AKV 2 mm, KSV 1.5 mm, and KS 1 mm, as well as folding machines and shears from RAS, etc. Current net list price is approx. 25,000 € You will receive an invoice with VAT shown separately; the invoice amount includes VAT. Shipping can be arranged if requested; forklift is available onsite. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone appointment. Dcodpfx Aisy R Efaeush Payment in cash upon collection; if you need anything else, please give me a quick call—thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Kondisi: bekas, Tahun pembuatan: 1993, gaya penekanan: 160 t, Press brake used Manufacturer: BBM Model: AP ME 160-40 Year of manufacture: 1993 Press force: 160 t Bending length: 4050 mm Table width: 190 mm Stroke: 250 mm Throat depth: 315 mm Equipment - CNC control - Swiveling operator panel at the front right - CNC backgauge (X-axis) - CNC electric depth adjustment - Manually adjustable backgauge fingers - Adjustable crowning table, manual via hand crank - Safety devices at rear and sides Dedpfx Aistufbneuoch - 3 front support arms - Double foot pedal - Accessories: 2 multi-V dies and 1 used gooseneck punch

Kondisi: baru, Tahun pembuatan: 2025, 1 Djdpfey Eizzox Aiuech