Beli Cronosstech Hsb 3R 2050X300 bekas (565)

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally by means of a hydraulic piston * Protected against overloading * All rolls driven by hydromotor and planetary reducer * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls easily readable via two digital indicators * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting section and pipe bending rolls Iedpow Slg Sjfx Afistf OPTIONAL EQUIPMENT * Top crane (lift) for support in large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Section bending rolls for profiles * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter rol atas: 150 mm, diameter roll samping: 130 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, ENGLISH_TRANSLATION_STANDARD_EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement of rear roll and bottom roll - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top roll driven by planetary gearbox - Rear roll ball system for easy sheet movement - Compliance with EU safety directives - High strength forged steel rolls made from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) Iodpfxoxw D Uds Afijtf - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for large diameter bending support - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves on shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Extractor system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 MM Pre-Bending: 3/4 mm Bending Capacity: 4/6 mm Top & Bottom Roll: 150 MM Side Roll: 130 MM Min. Bending Diameter: 225 / 750 MM Motor Power: 2.2 + 1.1 KW Bending Speed: 6 m/min Tank Capacity: 25 L Length: 3800 MM Width: 950 MM Height: 1100 MM Weight: 2250 KG

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 15 mm, STANDARD FEATURES * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * Foldable hydraulic head for easy removal of bent parts * Easy operation with a mobile control panel * Lower rolls' positions are easily read with two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with roller bearings * Hydraulic balancing system for parallel movement of the rolls * Extended shaft ends for mounting profile and tube bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for assisting large diameter bending * Ground and polished rolls for special applications * Roll sets for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the rolls TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 10/13 mm Bending : 13/15 mm Upper & Lower Roll : 300 mm Ijdpsw Sld Rjfx Afietf Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 5150 mm Width : 1500 mm Height : 1550 mm Weight : 9050 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls (up/down) Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven via planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength, forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual Itsdpfsw Slctex Afijf OPTIONAL EQUIPMENT Overhead crane (elevator) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejection system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 1.550 mm, lebar kerja: 1.550 mm, ketebalan lembaran (maks.): 15 mm, ketebalan pelat baja (maks.): 15 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Side rolls move up and down orbitally with hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * Folded pieces can be easily removed thanks to hydraulically opening head * Easy operation with movable control panel * Lower roll positions can be easily read with two digital indicators * Welded steel construction body * Induction hardened, hot-rolled steel shafts (SAE 1050 / CK45) * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Ground and polished rolls for special applications * Rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Ijdpfoxbzr Ujx Afijtf Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic opening top roll head Movable control panel Centrally driven rolls powered by motor Hydraulically operated rear roll and lower roll (up & down movement) Precision bending with braked main motor Cone bending and pre-bending system Upper and lower rolls driven by planetary reducer Rear roll ball system for facilitating sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator’s manual OPTIONAL EQUIPMENT Ijdpfx Afsw Slcgoiotf Overhead crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with mobile control panel * Lower roll positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending with bearing system * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile/pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending Itodpfew Slf Ujx Afiof * Hydraulic lateral supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, berat keseluruhan: 5.400 kg, STANDART EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement for rear and bottom rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top rolls driven by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for support in large diameter bending Ijdpfxsw Slbve Afistf - Hydraulic side supports for support in large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 20 mm, EN STANDARD EQUIPMENT * The upper, lower, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * The positions of the rolls can be easily read via three digital indicators * Easy removal of the bent part thanks to a hydraulically opening head and automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Special ground and polished rolls for special applications * Stepless speed control system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 12/16 mm Bending Capacity: 16/20 mm Itjdpfx Aew Smdfofiof Upper & Lower Rolls: 350 mm Side Rolls: 260 mm Motor Power: 23.5 kW Rolling Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT Itodpfx Aow Sl T Sefisf * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations Ijdsxbzptopfx Afietf * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Ideal for rolling round and various diameter materials Bottom and side rolls move vertically with direct hydraulic linear action Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by universal joint coupling system; two rolls powered rotation Roll positions easily read via three digital displays Hydraulically opening head for easy removal of rolled parts User-friendly with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and CE certified Operator’s manual OPTIONAL EQUIPMENT Remote assistance with NC control Upper crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Ejector system Iodpfsw Slxzex Afistf TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending Capacity: 8/10 mm Bending Capacity: 10/12 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 25 mm, daya: 38,5 kW (52,35 hp), STANDARD EQUIPMENT * The lower and side rolls are actuated up and down by pistons hydraulically attached to the frame, providing linear movement. * Protected against overload. * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven). * The position of the rolls can be easily read via three digital displays. * Hydraulic opening head and automatically lifting shaft enable easy removal of the bent part. * Very easy operation with mobile control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). Ijdpjw Sl I Nofx Afijtf * Dual-speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) support for large diameter bending operations. * Hydraulic side supports for large diameter bending operations. * Hydraulic plate ejector system. * Ground and polished rolls for special jobs. * Infinitely adjustable speed control system. * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll: 460 mm Side Roll: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Positions of the rolls can be easily read by three digital position indicators * Hydraulic drop-end and automatically upward-moving shaft ensure easy removal of the bent part * Easy operation via a movable control panel * Welded steel frame construction * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Ijdpfxjw Smb Rj Afijtf Pre-Bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 280 mm, diameter rol atas: 280 mm, diameter roll samping: 220 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The bottom and side rolls perform linear up-and-down movements via pistons hydraulically connected to the frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gear reducers (all 3 rolls driven by motors) * The positions of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow for easy removal of the bent workpiece * Easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for the parallel movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Itjdjw Smfcjpfx Afiof Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 320 mm, diameter rol atas: 320 mm, diameter roll samping: 240 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * Top roll and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Easy to read roll positions thanks to three digital displays * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Top & Bottom Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 - 5 m/min Itjdpfexw Ebljx Afijf Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body Ijdpfx Afjxw Ecvjiotf * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Itodpfx Asxd S T Usfijf Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, STANDARD EQUIPMENT Iedjw Slkkjpfx Afietf Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending round and various diameter materials Bottom and side rolls move vertically via direct hydraulic linear motion Protected against overload Top roll powered by electric motor and planetary gearbox. Bottom roll powered via cardan coupling system. Two rolls are driven Roll positions are easily readable with three digital displays Rolled parts can be easily removed thanks to the hydraulically operated drop-end Very easy to operate with mobile control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel roll movement Conforms to EU safety standards and CE marked User manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) support for large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Discharge/extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The lower and side rolls are moved up and down linearly by pistons hydraulically connected to the frame * Protected against overloading * The upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls can be easily read via three digital indicators * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very easy operation with the movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC automation controls * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic plate release system * Induction hardened and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg Itjdpfxow Smc Ij Afisf

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 40 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * Lower, upper, and side rolls are operated by hydraulic cylinders attached to the frame, enabling precise up and down linear movement * Protected against overload * Upper and side rolls are driven by hydromotor and planetary reducer (all three rolls are motor-driven) * The position of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic synchronization system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Iedjxw Ebxepfx Afiotf Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17800 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, trans-001 Itjdpfx Afjxqn Uboijf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, trans-001 Itedsyzqmdopfx Afiof

Kondisi: baru, Tahun pembuatan: 2026, daya: 55 kW (74,78 hp), gaya penekanan: 1.250 t, panjang langkah: 510 mm, kecepatan operasi: 6 mm/dtk, kecepatan mundur: 55 mm/dtk, kedalaman tenggorokan: 810 mm, jarak antara tiang: 7.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 1250 Ton 8.1 Metre CNC Press Brake – New / 12-Month Warranty Press brakes are heavy-duty industrial production machines designed for the precise, repeatable, and controlled bending of large-format sheet metal. The CRONOSSTECH 1250 Ton CNC Press Brake, featuring an 8,100 mm bending length and high tonnage capacity, is specifically engineered for heavy steel construction, energy sector, and large-scale industrial projects. Key Advantages - High-precision bending over 8.1 meters - 1250-ton maximum bending capacity - Advanced automation with ESA S840W CNC control unit - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength machine frame Itedpfx Afjyzb Hnsief Applications - Heavy steel construction - Energy sector and infrastructure projects - Shipbuilding and shipyard industries - Defense and heavy machinery manufacturing - Large-format sheet metal bending applications Standard Features - ESA S840W CNC control unit (3–8 axes) - 15.6” touchscreen, 2D graphics & offline programming - Automatic bending sequence and collision control - Angle measurement and automatic crowning correction - Servo-driven X + R axis backgauge system - High-precision linear guideways and ballscrew system - 2 backgauge fingers (3-position adjustable) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full cabin safety enclosure - Dual foot pedal (up/down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8,100 mm - Distance Between Columns: 7,100 mm - Stroke: 510 mm - Open Height (Daylight): 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2,375 mm - Machine Dimensions (LxWxH): 10,600 x 3,650 x 4,500 mm - Approach Speed: 70 mm/s - Bending Speed: 6 mm/s - Return Speed: 55 mm/s - Oil Tank: 1,000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Hydraulic punch clamping rolls - Widened table (for Multi-Vee dies) - 1,000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, jarak antara tiang: 2.150 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 100 Ton 2.6 Metre CNC Press Brake – HPB B100-2600 – New / 12-Month Warranty Press brakes are essential manufacturing equipment, providing high precision, repeatability, and production efficiency in sheet metal bending operations. Manufactured by CRONOSSTECH, the HPB B100-2600 CNC Press Brake offers a 100-ton bending capacity and 2,600 mm bending length, making it an ideal solution for medium-scale productions and precision bending applications. Key Advantages - Compact and highly efficient design - ESA S830 CNC control unit - Servo-driven precision backgauge system - Stable and rigid frame construction - Hydraulic and electrical components compliant with European standards Application Areas - Sheet metal bending operations - Machine manufacturing - Electrical panel production - Light and medium-scale metalworking - Workshop and serial production applications Standard Features - ESA S830 (3-4 axis) CNC control unit - 10” touchscreen and 2D graphic programming - Manual bending sequence and collision control - Angle measurement and crowning correction system - CRONOSS servo motor driven X-axis backgauge (±0.03 mm accuracy) - Hardened linear guideways and ballscrew system - 2 backgauge fingers (manual Z-axis) - Promecam quick tool clamping system - Eurostamp standard punch & die set - Open frame design (B Series) - Single pedal control system - GIVI linear scale (encoder) - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Eckerle pump - LED lighting and energy-saving mode - Front support arms (adjustable) Technical Specifications – HPB B100-2600 - Bending Capacity: 100 Tons - Bending Length: 2,600 mm - Distance Between Columns: 2,150 mm - Stroke: 260 mm - Daylight Opening: 465 mm - Throat Depth: 410 mm - Table Height: 885 mm - Machine Dimensions (LxWxH): 4,220 x 2,230 x 2,950 mm - Approach Speed: 200 mm/s - Bending Speed: 10 mm/s - Return Speed: 135 mm/s - Oil Tank: 170 L - Motor Power: 7.5 kW - Weight: 6,430 kg General Information Iedpoyzb Hbsfx Afistf - Place of Manufacture: Turkey - Warranty: 12 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.