Beli Dieffenbacher Kolom Ganda Presse bekas (14.283)

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Iaodpfx Afjd Ih Ncoior Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Iaodsg S R Twjpfx Afior Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Tahun pembuatan: 1984, Kondisi: bekas, Pressure: 100 t Upright gap: 1000 mm Stroke: 150 mm Table area: 1000 x 700 mm Distance table/ram: 500 mm Drawing cushion stroke: 180 mm Ram area: 1000 x 700 mm Ram boreholes x depth: 50 mm Strokes per minute: 85 spm Pin hole (depth x diameter): 85 x 50 mm T-slot: 22 DIN 650 Shape: diagonal Number of T-slots: 2 Sheet width: 400 mm Sheet length: 1000 mm Space requirement (approx.): 3.0 x 3.0 x 3.0 m Machine weight (approx.): 8 t Total power requirement: 30.2 kW - Fine stroke adjustment - Stroke shock absorption - Oil extraction - 2 cylinders Isdpjfn Apzofx Afijar - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and equipped with new control SIEMENS SIMATIC OP17

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Iedpfx Afsb U Hw Toioar Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Tahun pembuatan: 1980, Kondisi: bekas, Press capacity 100 t Frame gap - mm Stroke 350 mm Iajdpfx Afodlxctjior Table dimensions 1150 x 700 mm Total power requirement 11 kW Machine weight approx. t Space requirements approx. m with ram shock absorber and drawing cushion Machine without control cabinet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.750 mm, jarak gerak sumbu Z: 1.000 mm, model controller: Siemens NCU 840 W Serie 2, jumlah sumbu: 5, TECHNICAL DETAILS Travel X-axis: 2,500 mm Travel Y-axis: 1,750 mm Travel Z-axis: 1,000 mm A-axis: 20 arcseconds C-axis: 30 arcseconds Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Stepless feed X and Y-axis: up to 15,000 mm/min Feed Z-axis: up to 4,000 mm/min Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Spindle speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: Tilting spindle axis A-Axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: Hydraulic C-Axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: Hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 Iasdoyz Abtspfx Afijr CNC controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Stationary tool changer in the centre of the machine/rear cross traverse Disc magazine with 16 stations SK40 Heidenhain length measuring system Note: The seller can arrange for an external service provider for the removal of the machine.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Iodpfx Ajyf A H Nofisar Perjalanan sumbu Y: 2500 mm Perjalanan sumbu Z: 950 mm Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gantry-2010 Iedpfx Afoy Dvwyjioar

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 2500 mm Max. swing diameter over bed: 2700 mm Turning height: 2500 mm Control: Siemens 840D CNC Max. workpiece weight: 30 t Workpiece diameter: 2500 mm Crossrail travel (increments of 100 mm): 1200 mm Ram stroke: 1500 mm Ram cross-section: 250 x 250 mm Travel speed: 8 m/min Max. vertical feed: 6000 mm/min Max. cross feed: 8000 mm/min Table speed: 180 rpm Tool change time: 1 min Cutting speed: 140 m/min Cutting depth: 14 mm Main drive power: 100 kW Machine weight: approx. 47 t Footprint: approx. 12.5 x 8.0 x 6.7 m Equipment/Accessories: Isdpfx Asy Dvlwjfisar - Crossrail adjustable in 100 mm increments incl. locking mechanism - 2 rams with cross-section 250 x 250 mm; stroke 1500 mm - Both rams traversable over center (each 100 mm, i.e. both ballscrews offset from each other with collision protection) - ZF gearbox for main drive AC 100 kW / S1 Siemens, speed range 0–180 rpm - 2 tool changers with 16 stations each - Max. tool weight 50 kg; max. 800 kg in tool changer - 2 Renishaw touch probes with zero-point detection - Renishaw probe for workpiece measurement

Kondisi: bekas, Tahun pembuatan: 1987, b07ccce7cbedcde7 Iasdpeyz Db Uofx Afisr

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: 2002 Kontrol: Heidenhain iTNC530 Jam mesin: menyusul Sumbu X: sekitar 6.000 mm Sumbu Y: sekitar 3.500 mm Sumbu Z: sekitar 1.100 mm Sumbu A: Sumbu C: Iasdsyzz R Hspfx Afijr Kepala frais 2-sumbu Kecepatan spindle: maks. 14.000 rpm Perlengkapan tambahan - Penutup samping ganda Kondisi mesin Berfungsi penuh, kondisi sangat baik. Mesin masih terpasang daya dan siap pakai segera.

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Column gap 4150 mm Stroke 1200 mm Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Iasdpfx Aoyn R Elefijr Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Column clearance: 3160 mm Stroke: 1100 mm Distance table/sheet holder, max. stroke up, upper crossbeam adjustable: 1900 mm Table area: 3100 x 1900 mm Cushion pressure in table: 300 t Cushion stroke in table: 400 mm Cushion pressure in ram: 80 t Cushion stroke in table: 150 mm Iasdpfxeyn R Efo Afisr Ram area: 3100 x 1900 mm Cushion in ram: hydraulic, controlled Cushion in table: hydraulic, controlled Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Column gap 4150 mm Stroke 1200 mm Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Iaodpfxjyn R D Us Afijr Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Iedpfx Aoyn R D Iefijar Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Iaedpfxeyn R Dze Afior Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Iaodpfx Ajyn R Duofier Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1973, Pressure: 1000 t Iaodpfx Afeynmm Seior Gap between uprights: 4150 mm Stroke: 1200 mm Distance table/ram, max. stroke up, adj. up: 2100 mm Table size: 4000 x 2200 mm Cushion pressure in table: 360 t Cushion stroke in table: 300 mm Cushion pressure in ram: 100 t Cushion stroke in ram: 150 mm Ram surface: 4000 x 2200 mm Side frame opening: 1300 mm Cushion in table: hydraulic, controlled Cushion in ram: hydraulic, controlled Cutting shock absorber: hydraulic Control: Siemens S7 Height above floor: 7.7 m Total power requirement: 300 kW Machine weight approx. 280 t Space requirement approx. 5.75 x 4.3 x 9.55 m Year of manufacture: 1973 Modernised: 2005 With oil-hydraulic drive, hydraulically controlled drawing cushion in table and ram, hydraulic cutting shock absorber Dismantled and stored – Video prior to dismantling available from seller

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Iaedpeynmmxefx Afior Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Ijdeynmmrjpfx Afioar Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Iodpfxoynbdfj Afijar Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Iasdpfxoynbc Ij Afisr Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1983, druck_techdaten_01 Iasdeym Dz Dopfx Afisr

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, lebar meja: 1.000 mm, panjang meja: 1.200 mm, langkah bantalan cetakan: 200 mm, Mesin masih harus dibangun. Permintaan pelanggan dapat dipertimbangkan jika memungkinkan. Ejeksi di ram – sekitar 10 t. Meja dengan bantalan tarik sekitar 800 x 850 mm. Berat sekitar 18 t. Langkah sekitar 600 mm. Iedpfx Afevga H Esioar

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, Kontrol: Siemens 840 D Powerline Pemegang alat: HSK-A63 Kecepatan maksimum: 16.000 rpm Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Sumbu C: +/- 181,5 mm Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Iaodpsy Am Dhefx Afier Kinematika: Kepala garpu