Beli Kellenberger Mesin Penggiling Silinder Universal bekas (80.639)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Lsdpfx Ahovq R Uzorsru Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Technical details: Grinding length: 300 mm Centre height: 175 mm Swing diameter: 315 mm Clamping surface table (L x W): 1,800 x 200 mm Control: Heidenhain Maximum longitudinal adjustment of grinding unit on table: 1,100 mm Workpiece spindle speed: 3 steps / 1,500–2,200 rpm Infinitely variable feed: 0.001–1 mm Maximum travel X-axis: 300 mm Machine weight approx.: 3.1 t Machine dimensions approx. (L x W x H): 2.9 x 1.6 x 1.4 m Swivelling during machining left and right Automatic table reversal Lredpszaunzofx Ahrou Tailstock: MT3 taper Operation: hand control unit/foot switch Coolant: system with supply Measuring device: Heidenhain

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Lredpfxjynmpgs Ahrsu Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Lrsdpfx Aev Dxxzshreu Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Tahun pembuatan: 1979, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Centre height: 125 mm + heights from 50 mm Distance between centres: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Swivel angle: 270° Workpiece headstock: 20 - 400 rpm Ljdpfxek H Hp No Ahroru Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table feed rate: infinitely variable up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine has been completely retrofitted • New control cabinet & new wiring diagram • New motor & frequency converter for the workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry set according to the Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection protocol for details about the machine.

Kondisi: bekas, Tahun pembuatan: 1988, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Jarak pergerakan Jarak sumbu X: 600 mm Jarak sumbu Y: 450 mm Jarak sumbu Z: 450 mm Langkah spindel: 80 mm Meja kerja Ukuran meja: 1.000 × 400 mm Spindel Kecepatan spindel: 20–3.000 RPM Dudukan spindel: SK 40 Umpan dan gerakan cepat Umpan yang dapat diprogram secara otomatis: 1–4.000 mm/menit Gerakan cepat: 6 m/menit Pengendali Pengendali CNC: Philips 432 Data kinerja Daya penggerak: 12 kW Total kebutuhan daya: 15 kW PERALATAN Kepala V yang dapat diputar Pompa pendingin Penjepit alat hidraulik Ledpfxsz S Iz Ns Ahreru Pelumasan pusat otomatis Lampu mesin Baki penampung serpihan Kabinet pelindung percikan

Kondisi: bekas, Tahun pembuatan: 1990, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Jarak Gerak Lrsdez S I Sujpfx Ahrju Jarak sumbu X: 600 mm Jarak sumbu Y: 500 mm Jarak sumbu Z: 500 mm Meja Kerja Ukuran meja: 500 mm Kecepatan Pemakanan dan Gerakan Cepat Rentang kecepatan pemakanan: 2–10.000 mm/menit Gerakan cepat: 10 m/menit Spindel dan Tempat Alat Tempat alat: ISO 40 Rentang kecepatan: 0–6.300 RPM Penggerak utama: 8 kW Pengendali Pengendali CNC: Dialog 11 Data Kinerja Total kebutuhan daya: 23 kVA Berat mesin: sekitar 5.050 kg Dimensi Ruang yang dibutuhkan: sekitar 3,0 × 2,5 × 2,0 m Perbaikan dan Modernisasi Perbaikan: 2010 oleh FPS Modernisasi: 2010 oleh FPS PERALATAN Kabin pelindung percikan Meja putar sebagai sumbu ke-4 Majalah penggantian alat dengan 40 posisi Pengendali Dialog 11

Kondisi: bekas, Tahun pembuatan: 1990, RINCIAN TEKNIS Jarak pergerakan Jarak pergerakan sumbu X: 500 mm Jarak pergerakan sumbu Y: 400 mm Jarak pergerakan sumbu Z: 400 mm Meja kerja Ukuran meja: 680 × 380 mm Sistem kontrol Ledpfx Asz S Namehroru Sistem kontrol CNC: Philips 432 Kecepatan umpan dan kecepatan cepat Rentang kecepatan umpan: 1–3.000 mm/menit Kecepatan cepat: 6 m/menit Spindel dan dudukan perkakas Dudukan perkakas: ISO 40 Rentang kecepatan: 20–3.150 RPM Penggerak utama: 5 kW Kepala frais Rentang putar kepala frais: ±90° Data kinerja Total kebutuhan daya: 12 kW Berat mesin: sekitar 1,2 ton Dimensi Ruang yang dibutuhkan: sekitar 2,5 × 2 × 2 m PERLENGKAPAN Kepala frais yang dapat diputar Sistem kontrol CNC Philips 432

Kondisi: diremajakan ulang (bekas), Machine fully overhauled With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm With internal grinding attachment Various accessories MARCELS MASCHINEN AG Ljdpfjwhk Uuex Ahrjru

Kondisi: bekas, Tahun pembuatan: 1997, de-to-hu-it-lt-lv-nb-nl-pl Lrsdpfx Aey R Ed Njhrju

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Lrsdpjyatx Sjfx Ahrju

Kondisi: bekas, Tahun pembuatan: 1990, RINCIAN TEKNIS Jarak Gerak Jarak sumbu X: 800 mm Jarak sumbu Y: 550 mm Jarak sumbu Z: 500 mm Meja Kerja Ukuran meja: 1.000 × 630 mm Kecepatan Pemakanan dan Gerakan Cepat Rentang kecepatan pemakanan: 0–10.000 mm/menit Kecepatan gerakan cepat: 10 m/menit Spindel dan Dudukan Alat Dudukan alat: ISO 40 Rentang kecepatan: 20–4.000 RPM Penggerak Utama: 10 kW Pengendali Pengendali CNC: Dialog 11 Data Kinerja Total kebutuhan daya: 15 kW Berat mesin: sekitar 6.500 kg Dimensi Ruang yang dibutuhkan: sekitar 3,0 × 2,5 × 2,0 m Perbaikan dan Modernisasi Lodpez S I D Defx Ahrjru Perbaikan: 2010 oleh FPS Modernisasi: 2010 oleh FPS PERALATAN Kabinet pelindung percikan Pengubah alat dengan 30 posisi Pengendali Dialog 11

Kondisi: bekas, Tahun pembuatan: 1999, Diameter penggerindaan 350 mm Panjang penggerindaan 1000 mm Tinggi pusat 175 mm Kontrol FANUC 18i-TA TELAH DIREKONDISI UMUM Foto mesin serupa yang sudah dikirim - Perlengkapan batu gerinda KIRI 500 mm - Perlengkapan batu gerinda KANAN 400 mm - Perangkat gerinda dalam 120 mm untuk spindle gerinda dalam berpenggerak sabuk (standar) - Kontrol CNC FANUC 18i-TA - Disiapkan untuk pengendalian pengukuran kombinasi Marposs (Minialsar, Positionar) dengan E5N - Sumbu B - Kel-Set - Penarikan pinol hidraulis Lrodoy U N Hpopfx Ahrsu - Penyetelan mikro pada tailstock - Kepala spindle benda kerja dengan bagian bawah yang dapat diputar

Kondisi: sangat baik (bekas), mit-Innenschleifvorrichtung Lrjdpfx Aoy H Dq Hjhrou

Kondisi: bekas, Tahun pembuatan: 1998, Diameter penggerindaan 350 mm Panjang penggerindaan 1000 mm Tinggi pusat 175 mm Mesin yang telah diperbaiki dengan protokol pengukuran sesuai toleransi mesin baru Sistem kontrol BARU Eckelmann ENC dengan perangkat lunak penggerindaan BEMA Penggerak, motor, dan komponen dari mesin asli. Spindel benda kerja hanya berputar dengan torsi 320Nm Sumbu B yang dikendalikan secara numerik Perangkat penggerindaan internal Diameter 120mm, spindel frekuensi tinggi Roda gerinda kiri, diameter 400mm Roda gerinda kanan, diameter 400mm Perangkat penggerindaan internal untuk spindel frekuensi tinggi Kepala penunjang dengan penyetelan mikro Sistem pengukuran KEL SET Lredez Ikvgspfx Ahrou Posisi sumbu longitudinal aktif Kel-Pos Sensor pemotongan Marposs

Kondisi: bekas, Tahun pembuatan: 2000, Diameter penggerindaan: 500 mm Panjang penggerindaan: 1000 mm Tinggi antara titik: 250 mm Mesin telah diperbaiki sebagian dengan geometri baru dan hanya digunakan selama beberapa minggu sebelum dijual kembali karena kebangkrutan. - Perawatan besar - Geometri meja baru - Pengecatan sebagian di bagian dalam Peralatan cakram gerinda KIRI 400x63x127 mm (Standar) Peralatan cakram gerinda KANAN 300x40x127 mm Perangkat penggerindaan internal Ø120 mm untuk spindel frekuensi tinggi Pengontrol CNC KELCO 120 Sumbu C untuk penggerindaan bentuk tidak bulat. Kel-Poly SUMBU B: Sumbu B yang dikendalikan CNC KELCO 120: v konstan 35 m/detik atau 45 m/detik Spindel penggerindaan internal frekuensi tinggi Unit penggerak untuk spindel MFV dan MFZ Penarikan pinol hidrolik untuk kepala tetap TIDAK ADA penyesuaian mikro pada kepala tetap Insersi pinol pegas Pendingin meja atas Kepala spindel benda kerja standar MK 5 DIN 55026 Ukuran 5" Penyesuaian MIKRO untuk kepala spindel benda kerja standar Lodpfx Ahjxzk Nijroru Perangkat perataan pada meja bawah Pemosisian panjang aktif KELPOS, MARPOSS, dipasang pada kepala gerinda Sistem pengukuran alat KELSET, MARPOSS Sensor pemotongan MARPOSS Pengontrol pengukuran MARPOSS Minialsar siap Filter pita kertas

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Lrsdpfjvdk N Eox Ahrju Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2006, Diameter penggerindaan: 350 mm Panjang penggerindaan: 1000 mm Tinggi senter: 175 mm Berat mesin: sekitar 3,5 ton Mesin diperbarui sepenuhnya dengan standar BEMA, dilengkapi dengan garansi 12 bulan. Lodpfxet Ii Nbj Ahrjru Kondisi mekanis dan visual seperti baru. Foto mesin yang baru selesai dirakit, dengan beberapa opsi yang berbeda. Pengontrol Fanuc 21i -Kepala penggerinda UR 1-2-3 untuk penggerindaan luar/dalam/datar -Sumbu B otomatis 1° dengan mekanisme pengunci Hirth -Sistem pemosisian aksial aktif KEL-POS Movomatic -Sistem penyeimbang semi-otomatis KEL-BALANCE -Peralatan cakram gerinda sisi kiri, diameter 400 mm -Peralatan cakram gerinda sisi kanan, diameter 300 mm -Peralatan penggerindaan internal dengan penggerak sabuk -Kepala tetap dengan penyetelan mikro -Penyetelan halus meja atas -Sistem penghisap kabut penggerindaan -Filter pita kertas SBP4 240 liter

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: Lrjdpfxsuxfu No Ahrju -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Ledouxft Eopfx Ahroru Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t Lrjdpfot Ii Rrex Ahreu High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, 24062024-1 Lodpfow Rktzex Ahrsru

Kondisi: bekas, Tahun pembuatan: 1995, Diameter penggerinda 350 mm Panjang penggerindaan 1000 mm Lsdpfxsy R Ed Aj Ahreru Tinggi antara pusat 175 mm Pengendali Kelco 90 Berat mesin sekitar 6 ton Penjualan disertai dengan pengujian fungsi Sesuai permintaan, dengan geometri meja baru dengan biaya tambahan Sumbu B dapat disesuaikan secara kontinu Diameter roda penggerinda kiri dan kanan 400 mm Perangkat untuk penggerindaan bagian dalam Penyangga kepala dengan penyetelan halus Penggaris sinus pada WSS Set Kel Posisi longitudinal pasif Movomatic TMP91

Kondisi: bekas, Diameter gerinda: 250, 350, 450 mm Panjang gerinda: 1000 mm Tinggi antara titik: 125, 175, 225 mm Diameter roda gerinda: 400 mm Lebar roda gerinda: 50 mm Lubang: 127 mm Tirus spindel benda kerja: MK5 Kecepatan putar spindel benda kerja: 20-400 putaran/menit Dudukan spindel benda kerja dapat diputar: 360° Dudukan spindel gerinda dapat diputar: 180 + - ° Kecepatan putar spindel gerinda: 1500, 1700, 2200 putaran/menit Pemotongan bertahap: 0,001-0,030 mm/Ø Pemotongan berkelanjutan: 0-0,95 mm/Ø Meja dapat diputar: ±8° Pergerakan meja secara memanjang: 1300 mm Kecepatan meja: 0,02-6 m/menit Lrsdpjt Ii Nuofx Ahreu Berat benda kerja antara titik: 130 kg Berat benda kerja maks. (tanpa penjepit): 130 kg Pemasangan spindel internal: 70 mm Total kebutuhan daya: 6,5 kW Berat mesin: kira-kira 2,5 ton Ruang yang dibutuhkan: kira-kira 4,2 x 2,0 m Secara geometris diperbarui dan dicat ulang dengan lemari kontrol baru. Foto adalah dari mesin 600U yang baru saja dikirim. -Tampilan digital pada 2 sumbu. Resolusi sumbu X: 0,5 my Pilihan: -Encoder dengan tampilan digital pada dudukan spindel benda kerja -Encoder dengan tampilan digital pada dudukan spindel gerinda (tidak memungkinkan pengaturan ketinggian dengan spindel) -Peningkatan tinggi antara titik hingga maks. 225 mm -Pengaturan kecepatan untuk spindel gerinda -Filter pita kertas Termasuk: -Alat operasi -Selongsong penjepit untuk chuck Aksesori tambahan tersedia berdasarkan permintaan. Pada saat ini, mesin perkakas ini tidak memenuhi persyaratan keselamatan dan perlindungan dasar seperti yang tercantum dalam BetrSichV 2015. Peningkatan tujuan perlindungan minimum yang diperlukan dapat ditentukan melalui penilaian bahaya sesuai dengan BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Lrsdpov I Eq Sjfx Ahrou Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.